journal article·2025-03

A high-performance flexible biopolymer-based Ce oxide composite electrolyte for lithium-ion battery dendrite reduction

M. Leo Edward, M. Roselin Ranjitha, G. Thennarasu, E. Ranjith Kumar, A.F. Abd El-Rehim, V. Jaisankar

Publisher page

Abstract

We propose a novel solid-state composite polymer electrolyte (CPE) that includes Li 7La 2.5Ce 0.5Zr 2O 12 (Ce-LLZO), chitosan (CS)/agar-agar (AA) polymer, polyethylene glycol (PEG) plasticizer, and LiClO 4 salt. At 25 °C, the CPE 3 formulation, consisting of 15 wt% Ce-LLZO, 60 wt% CS-AA, 15 wt% PEG, and 10 wt% LiClO 4, demonstrated exceptional lithium (Li)-ion conductivity of 5.18 × 10 -3 S cm −1 and an optimal transference number (TLi +) of 0.937. We assessed the electrochemical stability of CPE 3 using linear sweep voltammetry, which revealed a maximum stability limit of 4.1 V (versus Li/Li+). In addition, the coin cell made with the Li||CPE 3||NMC configuration had an amazing discharge capacity of 163 mAhg-1 and stayed stable for up to 100 cycles at 0.1 °C in room temperature. Conversely, when subjected to Li-plating/stripping cycles, the symmetric Li||CPE 3||Li cell exhibited stability for 550 h and maintained a current density of 2.0 mA cm −2. Compared to Li-metal, the proposed material exhibited reduced overpotential while simultaneously enhancing electrochemical stability.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. In situ polymerization infiltrated three-dimensional garnet-based framework for quasi-solid lithium metal batteries
2. Polyethylene oxide-based solid-state composite polymer electrolytes for rechargeable lithium batteries10.1021/acsaem.1c00216 ↗
3. Ionic transport in solid-state composite poly (trimethylene carbonate)–Li6.7Al0.3La3Zr2O12 electrolytes: the interplay between surface chemistry and ceramic particle loading10.1016/j.electacta.2023.142785 ↗
4. A novel composite polymer electrolyte containing the lithium-ion conductor Li3Zr2Si2PO12 synthesized by cationic-exchange method for solid lithium metal batteries
5. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
6. Low-cost, gel polymer electrolyte for high-performance aluminum-ion batteries10.1021/acsami.1c05476 ↗
7. Microstructural and electrochemical properties of Al- and Ga-doped Li7La3Zr2O12 garnet solid electrolytes10.1021/acsaem.0c00347 ↗
8. Solid-state electrolyte membrane with conducting oxide-enhanced 3D nanofiber networks for LithiumBatteries10.1021/acs.nanolett.1c01704 ↗
9. Novel PEO-based composite solid electrolytes for All-Solid-State Li-S battery10.1016/j.jelechem.2023.118017 ↗
10. Strong lewis acid-base and weak hydrogen bond synergistically enhancing ionic conductivity of poly (ethylene oxide)@SiO2 electrolytes for high rate-capability Li-metal battery
11. Poly (ethylene oxide)-based composite polymer electrolytes embedding with ionic bond modified nanoparticles for all-solid-state lithium-ionbattery10.1016/j.memsci.2019.01.025 ↗
12. High compatible double surface-modification SB-PVDF/SB-Li7La3Zr2O12 composite solid electrolytes10.1016/j.jelechem.2023.117512 ↗
13. On transport in composites of binary electrolyte and single ion conductor—a chronoamperometry study10.1016/j.electacta.2024.144417 ↗
14. MatazAlcoutlabi,Composite nanofibers as advanced materials for Li-ion, Li-O2 and Li-S batteries10.1016/j.electacta.2016.02.012 ↗
15. Ultrathin polymer-in-ceramic and ceramic-in-polymer bilayer composite solid electrolyte membrane for high-voltage lithium metal batteries10.1016/j.memsci.2021.119840 ↗
16. Ceramic-in-polymer solid electrolyte reinforced by in-situ polymerization of PEGDA interlayer for lithium metal battery10.1016/j.ssi.2023.116217 ↗
17. Solid-state lithium battery with garnet Li7La3Zr2O12 nanofibers composite polymer electrolytes10.1016/j.ssi.2022.115897 ↗
18. None-mother-powder method to prepare dense Li-garnet solid electrolytes with high critical current density
19. Defect chemistry and electrical properties of garnet-type Li7La3Zr2O1210.1039/C7CP06768B ↗
20. The effect of 24c-site (A) cation substitution on the tetragonal cubic phase transition in Li7-xLa3-xAxZr2O12 garnet-based ceramic electrolyte10.1016/j.jpowsour.2012.12.076 ↗
21. Recent advancements in polymer-based composite electrolytes for rechargeable lithium batteries10.1007/s41918-018-0011-2 ↗
22. Crumlin, and marca doeff, garnet electrolyte surface degradation and recovery10.1021/acsaem.8b01723 ↗
23. A promising composite solid electrolyte incorporating LLZO into PEO/PVDF matrix for all-solid-state lithium-ion batteries10.1007/s11581-019-03320-x ↗
24. Bifunctional ionic liquid and conducting ceramic co-assisted solid polymer electrolyte membrane for quasi-soild-state lithium metal batteries10.1016/j.memsci.2019.05.066 ↗
25. Composite electrolyte membrane incorporating viscous copolymer with cellulose for high performance lithium-ion batteries10.1016/j.memsci.2015.09.056 ↗
26. Preparation and characterization of polymer electrolyte based on biopolymer I-Carrageenan with magnesium nitrate10.1016/j.ssi.2018.10.031 ↗
27. Cubic garnet solid polymer electrolyte for room temperature operable all-solid-state-battery10.1016/j.jmrt.2021.11.055 ↗
28. Didarul islam, and Taslim Ur Rashid,Biopolymer-based electrolytes for Dye-Sensitized solar cells: a Critical review10.1021/acs.energyfuels.0c03396 ↗
29. Preparation and characterisation of chitosan extracted from shrimp shell (Penaeus monodon) and chitosan-based blended solid polymer electrolyte for lithium-ion batteries10.1007/s00289-020-03472-1 ↗
30. Correlation between properties and conductivity mechanism in poly (vinyl alcohol)-based lithium solid electrolytes10.1016/j.ssi.2018.03.001 ↗
31. Gamma radiation modified the optical, electrical, and antibacterial characterization of CuONPs doped in polyethylene oxide/polyvinyl alcohol10.1016/j.jmrt.2020.11.046 ↗
32. Chitosan hydrogel/silk fbroin/Mg(OH)2 nanobiocomposite as a novel scaffold with antimicrobial activity and improved mechanical properties10.1038/s41598-020-80133-3 ↗
33. Single-ion-conducting nanocomposite polymer electrolytes based on PEG400 and anionic nanoparticles: Part 1. Synthesis, structure and properties10.1016/j.ijhydene.2013.11.007 ↗
34. Nanozirconia polymer composite porous membrane prepared by sustainable immersion precipitation method for use as electrolyte in flexible supercapacitors
35. Robert Kun Microstructure and temperature dependent lithium-ion transport of ceramic–polymer composite electrolyte for solid-state lithium ion batteries based on garnet-type Li7La3Zr2O1210.1016/j.ssi.2016.04.014 ↗
36. A promising composite solid electrolyte incorporating LLZO into PEO/PVDF matrix for all-solid-state lithium-ion batteries10.1007/s11581-019-03320-x ↗
37. Fabrication and electrochemical behavior of thin composite solid electrolyte for all-solid lithium batteries10.1007/s11581-019-03436-0 ↗
38. Hasanin · 2021 · vol. 79 · 6
39. Improvement in comprehensive properties of poly (Methyl Methacrylate)-based gel polymer electrolyte by a core-shell poly (Methyl Methacrylate)-grafted ordered mesoporous Silica
40. Single-ion polymer/LLZO hybrid electrolytes with high lithium conductivity10.1039/D1MA00857A ↗
41. Synergistic coupling between Li6.75La3Zr1.75Ta0.25O12 and poly (vinylidene fluoride) induces high ionic conductivity, mechanical strength, and thermal stability of solid composite electrolytes10.1021/jacs.7b06364 ↗
42. Ultrathin Li7La3Zr2O12@PAN composite polymer electrolyte with high conductivity for all-solid-state lithium-ion battery10.1016/j.ssi.2020.115227 ↗
43. Ian Farnan XPS study of ion irradiated and unirradiated CeO2 bulk and thin film samples10.1016/j.apsusc.2018.04.077 ↗
44. An efficient multi-doping strategy to enhance Li-ionconductivity in the garnet-type solid electrolyte Li7La3Zr2O12, RAC10.1039/C9TA00417C ↗
45. Garnet-Poly (ε-caprolactone-co-trimethylene carbonate) polymer-in-composite electrolyte for all-solid-state lithium-ion batteries10.1021/acsaem.0c03098 ↗
46. Ionic conduction in composite polymer electrolytes: case of PEO:Ga-LLZO composites10.1021/acsami.8b17279 ↗
47. Li7La3Zr2O12 ceramic nanofiber-incorporated solid polymer electrolytes for flexible lithium batteries10.1021/acsaem.0c00070 ↗
48. Fabrication and impedance analysis for designed composite layers with polymer and inorganic electrolytes leading to high conductivity10.1016/j.ssi.2017.12.018 ↗
49. Yan, ionic liquid crystal induced morphological control of solid composite polymer electrolyte for lithium-ion batteries
50. Polyethylene oxide/garnet-type Li6.4La3Zr1.4Nb0.6O12 composite electrolytes with improved electrochemical performance for solid state lithium rechargeable batteries10.1016/j.compscitech.2019.02.030 ↗
51. Garnet-polymer composite electrolytes with high Li+ conductivity and transference number via well-fused grain boundaries in micro-porous frameworks10.1002/celc.202000202 ↗
52. Lithium-ion pathway within Li7La3Zr2O12-polyethylene oxide composite electrolytes10.1002/anie.201607539 ↗
53. Morphological, dielectric and transport properties of garnet-type Li6.25+yAl0.25La3Zr2-yMnyO12 (y = 0, 0.05, 0.1, and 0.2)10.1016/j.ssi.2020.115339 ↗
54. Ultraviolet irradiated PEO/LATP composite gel polymer electrolytes for lithium-metallic batteries (LMBs)10.1016/j.apsusc.2019.07.179 ↗
55. A superior composite gel polymer electrolyte of Li7La3Zr2O12 poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for rechargeable solid-state lithium ion batteries10.1016/j.materresbull.2018.02.051 ↗