Anisotropic mechanism of monocrystalline silicon on surface quality in precision diamond wire saw cutting
Source abstract
Abstract
The surface quality of wire-saw cut monocrystalline silicon is affected by its anisotropy. This work investigates the effect of anisotropy on the surface quality of monocrystalline silicon (100), (110), and (111) crystalline surfaces in wire-saw cutting processing. The material properties of monocrystalline silicon in different crystal directions are analyzed, and the expressions of elastic modulus of monocrystalline silicon (100), (110), and (111) crystal surfaces are derived, and the influences of material properties and process parameters on macroscopic sawing force and material removal are investigated. The single abrasive grains scratching the surface of monocrystalline silicon and the wire saw cutting and processing process were simulated, and the diamond wire saw cutting and processing of monocrystalline silicon experiment was carried out. The experiment results show that: When the wire saw cuts and processes the (100), (110), and (111) crystal surfaces, the cutting angle with better sawing performance is 30°. The macroscopic normal and tangential average sawing forces on the crystalline surface of monocrystalline silicon (110) differed by 7.22N and 2.54N. The average error between the experiment value of surface warpage and the simulation value is 5.47 %, which indicates the accuracy of the surface morphology prediction model.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Influence of single diamond wire sawing of photovoltaic monocrystalline silicon on the feed force, surface roughness and micro-crack depth10.1016/j.mssp.2022.106525 ↗
2. Modeling of electroplated diamond wire and its application towards precision slicing of semiconductors10.1016/j.jmapro.2023.01.003 ↗
3. Influence of wire speed on diamond wire saw and surface quality of silion wafer
4. Study on the subsurface damage depth of monocrystalline silicon in ultrasonic vibration assisted diamond wire sawing
5. Molecular dynamics simulation on crystal defects of single-crystal silicon during elliptical vibration sawing10.1016/j.ijmecsci.2022.108072 ↗
6. Towards understanding the mechanism of vibration-assisted sawing of monocrystalline silicon by cyclic nanoindentation10.1016/j.jmatprotec.2022.117797 ↗
7. Modeling and experimental investigation of monocrystalline silicon wafer cut by diamond wire saw
8. Anisotropy of surface roughness in diamond turning of brittle single crystals10.1081/AMP-120003533 ↗
9. Effect of crystallographic orientation on ductile scribing of crystalline silicon: role of phase transformation and slip10.1016/j.msea.2012.04.034 ↗
10. Mechanical properties and deformation mechanisms of surface-modified 6H-silicon carbide10.1016/j.jmst.2021.02.028 ↗
11. Anisotropy dependence of material removal and deformation mechanisms during nanoscratch of gallium nitride single crystals on (0001) surface
12. Indentation cracking of monocrystalline silicon considering fracture anisotropy
13. Comparative analysis of mechanical strength of diamond-sawn silicon wafers depending on saw mark orientation, crystalline nature and thickness
14. Effect of crystal anisotropy on micro EDM process10.1080/10426914.2014.962660 ↗
15. Atomistic investigation of machinability of monocrystalline 3C–SiC in elliptical vibration-assisted diamond sawing
16. Stress analysis in scratching of anisotropic single-crystal silicon carbide10.1016/j.ijmecsci.2018.03.042 ↗
17. Effects of crystal orientation and negative rake angle on the brittle-ductile transition and subsurface deformation in machining of monocrystalline germanium - ScienceDirect10.1016/j.precisioneng.2018.11.011 ↗
18. Fracture behavior of SiGe nanosheets: mechanics of monocrystalline vs. polycrystalline structure
19. Friction behavior in nanoscratching of reaction bonded silicon carbide ceramic with Berkovich and sphere indenters10.1016/j.triboint.2016.01.013 ↗
20. On the effect of crystal orientation on ductile material removal in silicon10.1016/j.precisioneng.2004.05.004 ↗
21. The anisotropy of Young's modulus, shear modulus and Poisson's ratio in cubic materials10.1088/0022-3727/4/2/312 ↗
22. The role of crystal orientation on the forces generated in ultra-precision grinding of anisotropic materials such as monocrystalline silicon10.1504/IJMTM.2007.014159 ↗
23. Influence of silicon anisotropy on surface shape deviation of wafer by diamond wire saw
24. Material removal and surface generation mechanisms in diamond wire sawing of silicon crystal10.1016/j.mssp.2019.104642 ↗
25. A generalized maximum energy release rate criterion for mixed mode fracture analysis of brittle and quasi-brittle materials
26. Effect of sawing induced micro-crack orientations on fracture properties of silicon wafers10.1016/j.engfracmech.2016.01.014 ↗
27. Effect of speed on material removal behavior in scribing of monocrystalline silicon10.1016/j.precisioneng.2020.07.011 ↗