Impact of composition and thickness of step-graded AlGaN barrier in AlGaN/GaN heterostructures
Source abstract
Abstract
We propose an optimization method to change the Al component and the thickness of step-graded AlGaN barrier to achieve better electrical performance of the device. Based on the polarization effect, we find that a second potential well occurs while increasing the Al fraction and thickness of the upper AlGaN layer, which contributes to better drain current performance in the simulations. The wafers with different AlGaN barriers were grown to compare their surface morphology and electrical properties. The surface roughness of the wafer is related to the lattice constant of the upper AlGaN layer. According to the Hall and TLM measurements, the electron sheet density and electron mobility of the 20 nm-Al 0.35Ga 0.65N/10 nm-Al 0.25Ga 0.75N barrier sample are 1593 cm 2/Vs and 1.17 × 10 13 cm −2 respectively, resulting in a high spacing current of 61.45 mA. Moreover, the maximum drain current density of this barrier device is 589.02 mA/mm under the I–V characteristics, 1.37 times as much as that of the 20 nm-Al 0.25Ga 0.75N barrier. The higher gate barrier height of Al 0.35Ga 0.65N reduces the gate leakage current.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Semiconductor Quantum Structures and Devices · Radio Frequency Integrated Circuit Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. AlGaN/GaN high electron mobility transistor for various sensing applications: a review10.1016/j.micrna.2023.207528 ↗
2. The 2018 GaN power electronics roadmap10.1088/1361-6463/aaaf9d ↗
3. GaN-on-Si power Technology: devices and applications10.1109/TED.2017.2657579 ↗
4. Two dimensional electron gases induced by spontaneous and piezoelectric polarization in undoped and doped AlGaN/GaN heterostructures10.1063/1.371866 ↗
5. Formation of two-dimensional electron gas at AlGaN/GaN heterostructure and the derivation of its sheet density expression10.1088/1674-1056/24/6/067301 ↗
6. Polarization effects, surface states, and the source of electrons in AlGaN/GaN heterostructure field effect transistors10.1063/1.126940 ↗
7. Influence of AlGaN n-type doping and AlN thickness on the two-dimensional electron gas density (ns) and resistance (R2DEG)10.1016/j.sse.2023.108594 ↗
8. Ohmic contact with a contact resistivity of 12 Ω ⋅ mm on p-GaN/AlGaN/GaN10.1109/LED.2022.3193004 ↗
9. The role of AlGaN/GaN heterostructure properties in barrier height variation of Au-free ohmic contacts10.1016/j.mssp.2021.105806 ↗
10. Recent developments in materials, architectures and processing of AlGaN/GaN HEMTs for future RF and power electronic applications: a critical review10.1016/j.micrna.2022.207317 ↗
11. Challenges in material processing and reliability issues in AlGaN/GaN HEMTs on silicon wafers for future RF power electronics & switching applications: a critical review10.1016/j.mssp.2022.106982 ↗
12. Recent advances in GaN‐based power HEMT devices10.1002/aelm.202001045 ↗
13. DC, RF, and microwave noise performance of AlGaN-GaN Filed Effect Transistors Dependence of aluminum concentration10.1109/TED.2003.812083 ↗
14. Effects of strain relaxation on bare surface barrier height and two-dimensional electron gas in AlxGa1−xN/GaN heterostructures10.1063/1.4773334 ↗
15. Influence of strain relaxation of the AlxGa1−xN barrier on transport properties of the two-dimensional electron gas in modulation-doped AlxGa1−xN/GaN heterostructures10.1063/1.126463 ↗
16. Impact of strain relaxation of AlmGa1−mN layer on 2-DEG sheet charge density and current voltage characteristics of lattice mismatched AlmGa1−mN/GaN HEMTs10.1016/S0026-2692(01)00148-3 ↗
17. Simulation study of GaN-based HFETs with graded AlGaN barrier10.1016/j.sse.2015.04.003 ↗
18. Electron mobility in abrupt-interface and step-graded AlGaN/GaN Heterostructures10.1088/1361-6641/aa84d8 ↗
19. Growth and characterization of AlGaN/AlN/GaN HEMT structures with a compositionally step-graded AlGaN barrier layer10.1088/0256-307X/24/6/075 ↗
20. Graded barrier AlGaN/AlN/GaN heterostructure for improved 2-dimensional electron gas carrier concentration and mobility10.1007/s13391-014-4067-9 ↗
21. A review on the GaN-on-Si power electronic devices10.1016/j.fmre.2021.11.028 ↗
22. Strain control of GaN grown on Si substrates using an AlGaN interlayer10.1016/j.jcrysgro.2019.01.013 ↗
23. Design of step-graded AlGaN buffers for GaN-on-Si heterostructures grown by MOCVD10.1088/1361-6641/acb9b6 ↗
24. Charge storage impact on input capacitance in p-GaN gate AlGaN/GaN power high-electron-mobility transistors10.1088/1361-6463/ab86e7 ↗
25. Introducing optical cascode GaN HEMT10.1109/TED.2017.2657498 ↗
26. Evaluation and numerical simulations of GaN HEMTs electrical degradation10.1109/LED.2009.2029875 ↗
27. Trapping and thermal effects analysis for AlGaN/GaN HEMTs by means of TCAD simulations10.1109/LED.2013.2274326 ↗
28. Influence of the interface acceptor-like traps on the transient response of AlGaN/GaN HEMTs10.1109/LED.2012.2227235 ↗
29. Breakdown enhancement and current collapse suppression in AlGaN/GaN HEMT by NiOX/SiNX and Al2O3/SiNX as gate dielectric layer and passivation layer10.1109/LED.2019.2945175 ↗
30. TCAD simulation of a breakdown-enhanced double channel GaN metal–insulator–semiconductor field-effect transistor with a P-buried layer10.1088/1361-6641/ab81b3 ↗
31. Spontaneous polarization and piezoelectric constants of III-V nitrides10.1103/PhysRevB.56.R10024 ↗
32. Pyroelectric and piezoelectric properties of GaN-based materials10.1557/S1092578300002246 ↗
33. Dual-channel design to suppress buffer induced current degradation in AlGaN/GaN heterostructures on Si10.1088/1361-6528/ab5b3e ↗
34. The mobility of two-dimensional electron gas in AlGaN/GaN heterostructures with varied Al content