Active element Ti improves the Sn-based alloy filler/graphite soldering interface: A combined first-principles and experimental study
Source abstract
Abstract
Active element Ti plays a crucial role in the graphite soldering process. However, the atomic interaction mechanism between the active element Ti and graphite remains unclear. In this study, the enhancement effect of the active element Ti on the Sn-based alloy filler/graphite soldering interface was investigated by employing first-principles calculations combined with experimental methods. Based on the first-principles calculations, the adhesion work of the Sn/graphite interface models doped with two and four Ti atoms is 0.884 J/m 2 and 1.896 J/m 2 , respectively, while that of the clean model is negative. Moreover, the segregation heat of the Sn/graphite interface model doped with more Ti atoms is more negative. All of these results indicate that Ti atoms doped at the Sn/graphite interface play a significant role in enhancing the interface. The electronic structures of the interface models with different numbers of titanium atoms were analyzed. The results revealed that the enhancement of the Sn/graphite interface was attributed to the transfer of electrons from the Ti-3d orbitals to the C-2p orbitals, leading to a strong interaction between the Ti and C atoms. The segregation of Ti was clearly observed at the Sn3·5Ag4Ti (Ce,Ga)/graphite soldering interface in the experiments, which was consistent with the results from the first-principles calculations. The shear strength of the Sn3·5Ag4Ti (Ce,Ga)/graphite soldered joint was tested, and an enriched region of titanium was found in the fracture surface on the graphite side. In addition, a tensile simulation was performed on the clean and Ti-doped Sn/graphite interfaces, and the results indicated that the Sn/graphite interface model enriched with Ti atoms had greater tensile simulation strength than that of the clean Sn/graphite interface model. These results further showed that Ti played a reinforcing role at the Sn/graphite interface. The results from our study provide a theoretical basis for exploring low-temperature active bonding methods in the packaging process of graphite connected to the heat dissipation surface of electronic devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Novel heatsink for power semiconductor module using high thermal conductivity graphite10.1016/j.microrel.2016.07.029 ↗
2. Thermal design and validation of radiation detector for the ChubuSat-2 micro-satellite with high-thermal-conductive graphite sheets10.1016/j.actaastro.2017.03.030 ↗
3. Graphene heat dissipation film for thermal management of hot spot in electronic device10.1007/s10854-016-4758-0 ↗
4. Brazing filler metals10.1080/09506608.2019.1613311 ↗
5. Surface modification on wetting and vacuum brazing behavior of graphite using AgCu filler metal10.1016/j.surfcoat.2018.05.039 ↗
6. Wettability of carbon by aluminum and aluminum alloys10.1016/S0921-5093(98)00759-X ↗
7. Wettability and bonding of graphite by Sn0.3Ag0.7Cu-Ti alloys10.1016/j.carbon.2017.06.030 ↗
8. Insights into the adsorption and interfacial products improving the wetting of the Ag-Ti/graphite and Cu-Ti/graphite systems: a first-principles calculation
9. Wetting of porous graphite by Cu–Ti alloys at 1373K10.1016/j.matchemphys.2010.07.001 ↗
10. Research of joining Brittle nonmetallic materials with an active solder10.1155/2014/729135 ↗
11. Brazing of doped graphite to Cu using stress relief interlayers10.1016/j.jmatprotec.2008.06.021 ↗
12. Effects of active element Ti on interfacial microstructure and bonding strength of SiO2/SiO2 joints soldered using Sn3.5Ag4Ti(Ce,Ga) alloy filler10.1016/j.msea.2016.10.080 ↗
13. Influence of active element Ti on interfacial reaction and soldering strength between Sn3.5Ag4Ti(Ce,Ga) alloy filler and Si substrate10.1016/j.msea.2016.01.100 ↗
14. A novel low temperature active bonding of Si/Si with Sn3.5Ag4Ti(Ce,Ga) alloy filler10.1016/j.matlet.2015.11.120 ↗
15. Wide Band Gap chalcogenide semiconductors10.1021/acs.chemrev.9b00600 ↗
16. Inhomogeneous electron gas10.1103/PhysRevB.7.1912 ↗
17. Car-Parrinello molecular dynamics with Vanderbilt ultrasoft pseudopotentials10.1103/PhysRevB.47.10142 ↗
18. Interfacial properties and electronic structure of β-SiC(111)/α-Ti(0001): a first principle study
19. The density effect of van der Waals forces on the elastic modules in graphite layers10.1016/j.commatsci.2013.03.026 ↗
20. Understanding the influence of Lu, La and Ga active elements on the bonding properties of Sn/SiO2 interfaces from first principle calculations10.1016/j.ceramint.2020.06.264 ↗
21. Preparation method for metallographic specimen of iron-carbon and silicon-aluminium alloy
22. DFT study of NO adsorption on pristine graphene10.1039/C6RA27137E ↗
23. First-principles calculation on the relationships of h-WC/γ-Fe interface10.1016/j.jpcs.2018.07.007 ↗
24. First-principles calculations on interface stability and migration of H and He in W-ZrC interfaces10.1016/j.apsusc.2019.143995 ↗
25. First-principles study of the Ti(0001)/TiAl3(110) interfacial properties
26. Density functional calculation of transition metal adatom adsorption on graphene10.1016/j.physb.2010.05.001 ↗
27. Tang · 2022 · vol. 2022
28. Effect of Cr doping on interface properties of DLC/CrN composite coatings: first-principles study10.1016/j.diamond.2021.108721 ↗
29. Stability of the Al/TiB 2 interface and doping effects of Mg/Si10.1016/j.apsusc.2017.06.227 ↗
30. The wetting of Pb droplet on the solid Al surface can be promoted by ultrasonic vibration – molecular dynamics simulation10.1016/j.matlet.2019.127118 ↗
31. First-principles investigation on interface bonding properties between Fe3Cr3YC3 and γ-Fe10.1016/j.matlet.2023.133859 ↗
32. Interfacial adhesion energy of lithium-ion battery electrodes10.1016/j.eml.2016.08.002 ↗
33. Enhancement effects of Co doping on interfacial properties of Sn Electrode−Collector: a first-principles study10.1021/acsami.9b01418 ↗
34. Effects of titanium on active bonding between Sn3.5Ag4Ti(Ce,Ga) alloy filler and alumina10.1007/s10854-015-3176-z ↗
35. The wetting of alumina and vitreous carbon by copper-tin-titanium alloys10.1007/BF00553207 ↗
36. Wetting and strength in the tin–silver–titanium/sapphire system10.3139/146.017947 ↗
37. Adhesive transfer at copper/diamond interface and adhesion reduction mechanism with fluorine passivation: a first-principles study10.1016/j.carbon.2017.11.027 ↗
38. Adhesion and adhesive transfer at aluminum/diamond interfaces: a first-principles study10.1103/PhysRevB.69.235401 ↗