I–V characteristics of Pt/HfO2/YBa2Cu3O7-x heterostructures
Source abstract
Abstract
The resistance switching (RS) effect is one of the main research directions of the next generation of non-volatile memory devices. RS properties are mainly attained using different metallic or alloy electrodes; however, conductive oxides are also being investigated due to their excellent conductivity, thermal stability and oxidation resistance. Herein, a conductive oxide, i.e., YBCO, is used as an electrode for investigating the RS effect. The Pt/HfO 2/YBa 2Cu 3O 7-x (YBCO) heterostructure is prepared using the pulsed laser deposition method, and the RS characteristics of HfO 2 and the influence of oxygen ions (Ö 2−) migration on YBCO resistance during the RS effect are systematically studied. First, the difference in the RS effect of HfO 2 in the case of YBCO oxide electrode and Pt electrode is comparatively studied. It is found that the oxide electrode not only renders better oxidation resistance but also serves as the Ö 2− storage layer to promote the occurrence of RS effect, resulting in relatively low “Set” and “Reset” voltages. The mechanism of RS generation can be explained using the oxygen vacancies (OV 2+ ) conductive filament (CF) model. The electrical transport characteristics of HfO 2 mainly change from the Ohmic conduction mechanism to the space charge-limited current (SCLC) mechanism in the high-resistance state of HfO 2, and mainly conforming to the SCLC mechanism in the low-resistance state of HfO 2. With the decrease in temperature, the structure still demonstrates an obvious RS effect, and the resistance of high-resistance HfO 2 and “Set” voltage of the RS effect increases slightly. Furthermore, during the RS process of HfO 2 , it is observed that the resistance of YBCO during the superconducting transformation process significantly increases under a positive bias voltage (YBCO with high potential) due to the migration and injection effects of Ö 2− . However, any significant change in YBCO resistance is not observed under the non-superconducting state and after superconducting transformation. At the same time, any change in YBCO resistance is not observed under a negative bias voltage. In addition, due to slight changes in the carrier concentration of YBCO, the magnetization curves of the Pt/HfO 2/YBCO structure in HRS are slightly higher than LRS. These results provide experimental references for further research on the RS mechanism and development of adjustable devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Memory and Neural Computing · Semiconductor materials and devices · Ferroelectric and Negative Capacitance Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Resistive switching materials for information processing10.1038/s41578-019-0159-3 ↗
2. Recent progress on visible-light-driven metal and non-metal doped ZnO nanostructures for photocatalytic degradation of organic pollutants10.1016/j.mssp.2021.106390 ↗
3. Physical mechanism and performance factors of metal oxide based resistive switching memory: a review10.1016/j.jmst.2015.10.018 ↗
4. Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering
5. Tunneling electroresistance effect in a Pt/Hf0.5Zr0.5O2/Pt structure10.1063/1.4977028 ↗
6. Oxygen vacancy filament-based resistive switching in Hf0.5Zr0.5O2 thin films for NonVolatile memory10.5185/amlett.2019.2225 ↗
7. Advances of RRAM devices: resistive switching mechanisms, materials and bionic synaptic application10.3390/nano10081437 ↗
8. Active electrode redox reactions and device behavior in ECM type resistive switching memories10.1002/aelm.201800933 ↗
9. Resistance switching in two-terminal ferroelectric-semiconductor lateral heterostructures10.1063/1.5128611 ↗
10. Influence of metal electrode on the performance of ZnO based resistance switching memories10.1063/1.4996975 ↗
11. Influence of electrode material on the resistive memory switching property of indium gallium zinc oxide thin films10.1063/1.3456379 ↗
12. Impact of electrode materials on resistive-switching memory programming10.1109/LED.2009.2025061 ↗
13. I-V characteristics of the GdBa2Cu3O7-x/YBa2Cu3O7-ẟ double-layer micro-structures prepared by self-sensitive chemical modification method10.1016/j.ceramint.2021.08.096 ↗
14. Sol-gel chemistry of an aqueous precursor solution for YBCO thin films10.1007/s10971-009-1987-1 ↗
15. Improved resistive switching characteristics of a Pt/HfO2/Pt resistor by controlling of anode interface with forming and switching polarity10.1016/j.apsusc.2017.11.073 ↗
16. Oxygen deficiency, stacking faults and calcium substitution in MOD YBCO coated conductors10.1109/TASC.2012.2233843 ↗
17. Critical dimensions for YBCO islands grown by pulsed laser deposition10.1007/s003390101026 ↗
18. Resistive switching characteristics of Pt/Nb:SrTiO3/LaNiO3 heterostructure10.1007/s10971-019-05135-8 ↗
19. The transport properties in BiFeO3/YBCO heterostructures10.1016/j.jallcom.2015.05.141 ↗
20. Charge transport in single CuO nanowires10.1063/1.4900966 ↗
21. Potential Distribution and negative resistance in thin oxide films10.1063/1.1713823 ↗
22. Local work function analysis of Pt/TiO2 photocatalyst by Kelvin probe force microscope10.1088/0957-4484/18/8/084007 ↗
23. Realization of excellent ferroelectricity in PDA-derived Hf0.5Zr0.5O2 films through insertion of an ultrathin Ti metal layer10.1016/j.scriptamat.2022.114758 ↗
24. Two-fluid model of superconductivity10.1103/PhysRevLett.1.399 ↗
25. Characteristic electroforming behavior in Pt/TiO2/Pt resistive switching cells depending on atmosphere10.1063/1.3043879 ↗