Effect of abrasive on tribological behavior and polishing effect of β-Ga2O3(100) substrate
Source abstract
Abstract
Given the problems of easy cleavage and unfavorable surface integrity in the processing of β-Ga 2O 3 (100), the effects of abrasive type (diamond, silicon carbide, alumina, cerium oxide) and abrasive particle size (W3, W2, W1, W0.5) on substrate processing were investigated via friction and polishing experiments. The results demonstrated that a strong correlation exists between the surface integrity of the β-Ga 2O 3(100) substrate and abrasive type, and it was determined that the diamond abrasive with sharp cutting edges was optimal. The abrasive particle size significantly affected the friction wear and polishing effect of β-Ga 2O 3(100). The use of fine abrasive particles can effectively inhibit the formation of cleavage pits and scratches. After polishing with the W0.5 diamond, the surface roughness ( Ra) of the substrate decreased to 3.8 nm, and the scratch depth decreased to 18 nm. The abrasive particle size significantly affected the friction wear and polishing effect of β-Ga 2O 3(100). The shape and size of the abrasive are crucial factors affecting the processing of the β-Ga 2O 3 (100) substrate. The diamond abrasive particle size distribution was uniform, and the axial ratio of the abrasive was predominantly between 0.6 and 0.9. The surface material of the substrate was removed via the “three-body rolling” method, so the polishing effect was optimal.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ga2O3 and related materials · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Recent advance in preparation and ultra-precision machining of new generation semiconductor material of β-Ga2O3 single crystals10.3901/JME.2021.09.213 ↗
2. β-Gallium oxide power electronics10.1063/5.0060327 ↗
3. Impact on the subsurface layers of the single-crystal β-Ga2O3 wafers induced by a mechanical wear10.1016/j.mssp.2022.106520 ↗
4. A strategic review on gallium oxide based deep-ultraviolet photodetectors: recent progress and future prospects10.1002/adom.202002160 ↗
5. A review of Ga2O3 materials, processing, and devices10.1063/1.5006941 ↗
6. A strategic review on gallium oxide based power electronics: recent progress and future prospects
7. Ultra-wide bandgap semiconductor of β-Ga2O3 and its research progress of deep ultraviolet transparent electrode and solar-blind photodetector10.7498/aps.68.20181845 ↗
8. Gallium oxide nanostructures: a review of synthesis, properties and applications10.3390/nano12122061 ↗
9. A review on gallium oxide materials from solution processes10.3390/nano12203601 ↗
10. Deep-level defects in gallium oxide10.1088/1361-6463/abbeb1 ↗
11. Effect of pad and slurry on fixed abrasive polishing of gallium oxide crystal
12. CMP characteristics of quartz glass substrate by aggregated colloidal ceria slurry10.1016/j.precisioneng.2019.06.014 ↗
13. Effects of the polishing pressure on the polishing performance of nano-sized PS/CeO2 composite abrasives
14. Nano-scale scratching in chemical–mechanical polishing10.1016/j.cirp.2008.03.098 ↗
15. Prediction and experimental investigation of depth of subsurface damage in semi-consolidated abrasive grinding of cleavable gallium oxide crystals
16. Research progress of chemical mechanical polishing technology of silicon carbide wafer
17. Super hard and brittle material removal mechanism in fixed abrasive lapping: theory and modeling10.1016/j.triboint.2023.108493 ↗
18. Influence of tool and workpiece interface temperature rise on the life of ice bonded abrasive polishing tool
19. The effect of hydrogen peroxide on composite lapping of Titanium Alloy (TC4) by free abrasive assisted fixed abrasive
20. Research on dynamic characteristic of softness consolidation abrasives in machining process
21. Improvement of roundness in centerless finishing of bearing steel rollers by Taguchi method in experiments and simulation
22. Effect of abrasive grit shape on polishing of β-Ga2O3(100) substrate10.1016/j.precisioneng.2019.10.003 ↗
23. Effect of lapping fluid on β-Ga2O3 crystal lapping process
24. Experimental study of single-crystal GaN wafer electro-Fenton magnetorheological complex friction wear10.1016/j.triboint.2023.108260 ↗
25. Tribological behavior of 6H–SiC wafers in different chemical mechanical polishing slurries
26. Deformation and fracture behaviors of monocrystalline β-Ga2O3 characterized using indentation method and first-principles calculations10.1016/j.matchar.2023.112920 ↗
27. Diamond particle shape: its measurement and influence in abrasive wear10.1016/j.triboint.2008.04.007 ↗
28. Influence of abrasive shape on the abrasion and phase transformation of monocrystalline silicon10.3390/cryst8010032 ↗
29. Movement patterns of ellipsoidal particle in abrasive flow machining10.1016/j.jmatprotec.2009.08.013 ↗