journal article·2024-01

Chemical states and electrical features of Ti/CaTiO3 (CT)/p-InP MIS-type Schottky diode with a high-k CT interlayer

S. Sai Krupa, V. Rajagopal Reddy, Chel-Jong Choi

Publisher page

Abstract

The work was mainly concentrated on the fabrication of the Ti/CaTiO 3 (CT)/p-InP MIS-type diode with a CT interlayer and explored its surface topology, structural and chemical features using AFM, XRD and XPS procedures. XRD and XPS analysis exposes that the CT layer was formed on the InP surface. The electrical properties of the MIS diode and Ti/p-InP Schottky diode (SD) were performed using I–V and C–V procedures. A better rectification nature was obtained for the MIS diode over the SD. A larger barrier height (BH) was obtained for the MIS diode (0.84 eV) compared to the SD (0.72 eV), indicating the CT layer affects the BH of the SD. The BH was extracted using I–V, Cheung`s function and α(V)–V graph, and the values are comparable, indicating their steadiness and validity. Reduced density of states (N SS) was achieved for the MIS diode than the SD, signifying that the CT layer diminished the N SS value. Results show that the CT interlayer is a potential high-k material for making MIS/MOS devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Ultrahigh-speed integrated circuits using InP-based HEMTs10.1143/JJAP.37.1359 ↗
2. Temperature dependence of the electrical characteristics of Yb/p-InP tunnel metal-insulator-semiconductor junctions10.1063/1.346358 ↗
3. Electrical characteristics of an Ag/n-InP Schottky diode based on temperature-dependent current-voltage and capacitance-voltage measurements10.1007/s11661-015-3044-8 ↗
4. Selective epitaxy of InP on Si and rectification in graphene/InP/Si hybrid structure10.1021/acsami.6b09592 ↗
5. Influence of tin oxide (SnO2) interlayer on the electrical and reverse current conduction mechanism of Au/n-InP Schottky junction and its microstructural properties10.1016/j.tsf.2021.139001 ↗
6. Capacitance-voltage (C-V) characteristics of Cu/n-type InP Schottky diodes10.4313/TEEM.2016.17.5.293 ↗
7. InP Schottky junctions for zero bias detector diodes10.1016/S0042-207X(02)00723-6 ↗
8. Electrical properties of Au/polyvinylidene fluoride/n-InP Schottky diode with polymer interlayer10.1016/j.tsf.2014.01.036 ↗
9. Rhoderick · 1988
10. Electronic properties of Al/MoO3/p-InP enhanced Schottky barrier contacts10.1016/j.tsf.2016.08.019 ↗
11. Tuning electrical properties of Au/n-InP junctions by inserting atomic layer deposited Al2O3 layer10.1016/j.vacuum.2017.08.004 ↗
12. Microstructural, chemical states and electrical properties of Au/CuO/n-InP heterojunction with a cupric oxide interlayer10.1016/j.vacuum.2018.02.041 ↗
13. Analysis of interface states in Au/ZnO/p-InP (MOS) structure10.1007/s10854-018-9371-y ↗
14. Current-voltage characteristics of Ag/TiO2/n-InP/Au Schottky barrier diodes10.1063/1.5064637 ↗
15. Properties of a facile growth of spray pyrolysis-based rGO films and device performance for Au/rGO/n-InP Schottky diodes10.1007/s10854-020-04843-0 ↗
16. Barrier reduction and current transport mechanism in Pt/n-InP Schottky diodes using atomic layer deposited ZnO interlayer10.1007/s10854-021-06758-w ↗
17. Analysis of microstructure, chemical state and electrical features of Ti/WO3/p-InP heterojunction with a tungsten oxide insulating layer10.1007/s10854-023-10893-x ↗
18. Perovskite CaTiO3 as an incipient ferroelectric10.1016/S0038-1098(99)00153-2 ↗
19. Negative temperature coefficient resistance (NTCR) ceramic thermistors: an industrial perspective10.1111/j.1551-2916.2009.02990.x ↗
20. Structure and properties of CaTiO310.1107/S0365110X57000675 ↗
21. High-temperature structural phase transitions in perovskite (CaTiO3)10.1088/0953-8984/8/43/019 ↗
22. Structural, electronic and elastic properties of the cubic CaTiO3 under pressure: a DFT study10.1063/1.4926437 ↗
23. Phonons and static dielectric constant in CaTiO3 from first principles10.1103/PhysRevB.62.3735 ↗
24. Structural phase transition and octahedral tilting in the calcium titanate perovskite CaTiO310.1016/j.ssi.2008.11.019 ↗
25. Electronic and optical behaviour of lanthanum doped CaTiO3 Perovskite10.1088/2053-1591/ab6802 ↗
26. From incipient ferroelectricity in CaTiO3 to real ferroelectricity in Ca1−x Pbx TiO3 solid solutions10.1063/1.1497199 ↗
27. Gamma radiation-induced synthesis of novel PVA/Ag/CaTiO3 nanocomposite film for flexible optoelectronics10.1038/s41598-023-38829-9 ↗
28. Vanadium doped CaTiO3 cuboids: role of vanadium in improving the photocatalytic activity10.1039/D1NA00468A ↗
29. Enhanced photocatalytic activity of surface disorder-engineered CaTiO310.1016/j.materresbull.2018.05.008 ↗
30. Band offsets and interfacial properties of HfAlO gate dielectric grown on InP by atomic layer deposition10.1186/s11671-017-2104-y ↗
31. In situ passivation of InP surface using H2S during metal organic vapor phase epitaxy10.1063/1.3233935 ↗
32. Modification of interface properties of Au/n-GaN Schottky junction by rare-earth oxide Nd2O3 as an interlayer and its microstructural characterization10.1016/j.vacuum.2023.112300 ↗
33. Williams · 1985
34. Sze · 2006
35. Electron transport at metal-semiconductor interfaces: general theory10.1103/PhysRevB.45.13509 ↗
36. A detailed comparative study on the main electrical parameters of Au/n-Si and Au/PVA:Zn/n-Si Schottky barrier diodes10.1016/j.mssp.2013.07.013 ↗
37. Extraction of Schottky diode parameters from forward current‐voltage characteristics10.1063/1.97359 ↗
38. Chemical, electrical and carrier transport properties of Au/cytosine/undoped-InP MPS junction with a cytosine polymer
39. On the extraction of linear and nonlinear physical parameters in nonideal diodes10.1063/1.370206 ↗
40. Electron transport of inhomogeneous Schottky barriers: a numerical study10.1063/1.349737 ↗
41. A modified forward I-U plot for Schottky diodes with high series resistance10.1002/pssa.2210660159 ↗
42. Space charge limited conduction in plasma polymerized N,N,3,5 tetramethylaniline thin films10.1016/j.tsf.2005.04.110 ↗
43. Microstructural, electrical and carrier transport properties of Au/NiO/n-GaN heterojunction with a nickel oxide interlayer10.1039/C6RA23476C ↗
44. Rectification at graphene-semiconductor interfaces: zero-gap semiconductor-based diodes
45. Studies of tunnel MOS diodes I. Interface effects in silicon Schottky diodes10.1088/0022-3727/4/10/319 ↗
46. Electrical and dielectric properties of Al/(PVP: Zn-TeO2)/p-Si heterojunction structures using current-voltage (I-V) and impedance-frequency (Z-f) measurements10.1007/s00339-020-03804-y ↗