Eliminating cracking morphology of solution-processed CZTSSe absorbers by Sn-rich composition engineering
Source abstract
Abstract
Sol-gel method has attracted widespread attention for fabricating highly efficient Cu 2ZnSn(S, Se) 4 (CZTSSe) solar cells. However, the volume shrinkage of the gel during the baking process will cause severe cracking of CZTSSe films, which results in shunt paths and significantly deteriorates device performance. Herein, an Sn-rich CZTS precursor is proposed to produce high-quality CZTSSe films, which could relieve the shrinkage forces in CZTS precursor film and compensate for Sn loss of CZTSSe absorbers during selenization process. The effects of Sn content on CZTS precursor compactness and the post-selenization process on the crystallization quality of CZTSSe films are thoroughly investigated. Furthermore, the formation of the MoSe 2 interfacial layer and the SnSe 2 secondary phase can be regulated efficiently. As a result, the separation and collection of carriers are greatly improved as the depletion region width ( W d ) of the CZTSSe solar cell is broadened. And the difference between the activation energy ( E a) and band gap ( E g ) has decreased, indicating that the carrier recombination loss caused by the deviated Sn content in CZTSSe films has been effectively reduced. Consequently, the efficiency of the CZTSSe device increased from 7.6% to 9.3% through Sn-rich composition engineering. This study elucidates the role of Sn content in the fabrication of high-quality CZTSSe films and advances the development of ambient air-processed CZTSSe solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Kesterites-a challenging material for solar cells10.1002/pip.2156 ↗
2. Back contact engineering for increased performance in kesterite solar cells10.1002/aenm.201602585 ↗
3. Potential role of kesterites in development of earth‐abundant elements‐based next generation technology10.1002/solr.202000815 ↗
4. Device characteristics of an 11.4% CZTSe solar cell fabricated from sputtered precursors10.1002/aenm.201703295 ↗
5. UV-ozone induced surface passivation to enhance the performance of Cu2ZnSnS4 solar cells10.1016/j.solmat.2019.04.014 ↗
6. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
7. Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells10.1038/s41560-022-01132-4 ↗
8. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
9. Fine-tuning the Sn content in CZTSSe thin films to achieve 10.8% solar cell efficiency from spray-deposited water-ethanol-based colloidal inks10.1002/aenm.201501404 ↗
10. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
11. A direct measurement of higher photovoltage at grain boundaries in CdS/CZTSe solar cells using KPFM technique10.1016/j.solmat.2018.01.040 ↗
12. Back contact band offset study of Mo-CZTS based solar cell structure by using XPS/UPS techniques
13. Highly efficient copper-zinc-tin-selenide (CZTSe) solar cells by electrodeposition10.1002/cssc.201301347 ↗
14. Effects of SnSe2 secondary phases on the efficiency of Cu2ZnSn(Sx,Se1−x)4 based solar cells10.1016/j.tsf.2014.10.058 ↗
15. Band lineup of a SnS2/SnSe2/SnS2 semiconductor quantum well structure prepared by van der Waals epitaxy10.1063/1.370160 ↗
16. A temporary barrier effect of the alloy layer during selenization: tailoring the thickness of MoSe2 for efficient Cu2ZnSnSe4 solar cells10.1002/aenm.201402178 ↗
17. Evolution of Cu2ZnSnS4 during non-equilibrium annealing with quasi-in situ monitoring of sulfur partial pressure10.1021/acs.chemmater.7b00671 ↗
18. Nanoparticle‐based Cu2ZnSn(S,Se)4 solar cells with a 9.1% efficiency obtained by an optimization of intering process10.1002/solr.201700063 ↗
19. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
20. Defect control for high‐efficiency Cu2ZnSn(S,Se)4 solar cells by atomic layer deposition of Al2O3 on recursor film10.1002/solr.202100181 ↗
21. Cadmium free Cu2ZnSnS4 solar cells with 9.7% efficiency10.1002/aenm.201900439 ↗
22. Cu2ZnSnS4 Solar Cells with over 10% Power Conversion Efficiency Enabled by Heterojunction Heat Treatment., 764-772. https://doi.org/10.1038/s41560-018-0206-0.10.1038/s41560-018-0206-0 ↗
23. Investigating the effect of sulphurization on volatility of compositions in Cu-poor and Sn-rich CZTS thin films10.1016/j.apsusc.2019.145043 ↗
24. Formation mechanism of secondary phases in Cu2ZnSnS4 growth under different copper content10.1016/j.matlet.2016.09.090 ↗
25. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol–gel route10.1039/C3TA13533K ↗
26. Ambient air-processed Cu2ZnSn(S,Se)4 solar cells with over 12% efficiency10.1016/j.scib.2020.12.030 ↗
27. Discussion on cracking mechanism of coatings film
28. Cracking and delamination of coatings10.1116/1.577265 ↗
29. Point defects, compositional fluctuations, and secondary phases in non-stoichiometric kesterites
30. Se-Sn (Selenium-Tin)
31. Thermodynamic aspects of the synthesis of thin-film materials for solar cells10.1002/cphc.201200067 ↗
32. Growth of Cu2ZnSnSe4 film under controllable Se vapor composition and impact of low Cu content on solar cell efficiency10.1021/acsami.6b00081 ↗
33. The role of hydrogen from ALD-Al2O3 in kesterite Cu2ZnSnS4 solar cells: grain surface passivation10.1002/aenm.201701940 ↗
34. Tip-sample interactions in Kelvin probe force microscopy: quantitative measurement of the local surface potential10.1021/jp806657k ↗
35. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
36. Engineering of effective back-contact barrier of CZTSe: nanoscale Ge solar cells – MoSe2 defects implication10.1016/j.solener.2019.10.042 ↗
37. Thermally evaporated Cu2ZnSnS4 solar cells