Holding time effect on mechanical properties and protrusion behaviors of through silicon via copper under various annealing processes
Source abstract
Abstract
The thermomechanical reliabilities of TSV based structures are closely affected by the protrusion deformation, stress-strain constitutive behavior and microstructure evolution of TSV-Cu under various thermal loadings. In this study, the stress-strain constitutive curves of TSV-Cu under various annealing conditions considering holding time effect are acquired by the nanoindentation test and finite element (FE) reverse analysis. The yielding softening in stress-strain curves is found if the holding time is less than 90 min. However, the stable stress-strain curves are obtained as holding time exceeds 90 min. Furthermore, the mechanisms of softening and stability in stress-strain curves are revealed by observing the microstructure evolution of TSV-Cu with a wide range of holding time. In addition, the relationships among protrusion height, constitutive curves as well as microstructure parameter of TSV-Cu with different annealing holding time are built. This study provides an intrinsic insight on the correlations of deformation, constitutive curves, and microstructure for TSV-Cu annealing processes considering holding time effect.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. An overview of through-silicon-via technology and manufacturing challenges10.1016/j.mee.2014.10.019 ↗
2. Covalently formation of insulation and barrier layers in high aspect ratio TSVs10.1016/j.apsusc.2021.151588 ↗
3. Investigation on filling method and thermal reliability of Sn58Bi-TSV10.1016/j.matlet.2021.129306 ↗
4. A review on the mainstream through-silicon via etching methods10.1016/j.mssp.2021.106182 ↗
5. Study on copper protrusion of through-silicon via in a 3-D integrated circuit10.1016/j.msea.2019.03.130 ↗
6. Optimization and characterization of the metal cap layout above through-silicon via to improve copper dishing and protrusion effect for the application of 3-D integrated circuits10.1109/TCPMT.2018.2858286 ↗
7. Optimization of TSV interconnects and BEOL layers under annealing process through fracture evaluation10.1111/ffe.13206 ↗
8. Effect of silicon anisotropy on interfacial fracture for three dimensional through-silicon-via (TSV) under thermal loading10.1016/j.engfracmech.2019.01.030 ↗
9. Residual stress and pop-out simulation for TSVs and contacts in via-middle process10.1109/TSM.2017.2688498 ↗
10. Stress evolution mechanism and thermo-mechanical reliability analysis of copper-filled TSV interposer10.17531/ein.2020.4.14 ↗
11. Development of novel multi-selective slurry with mechanically driven etching for through silicon via chemical mechanical polishing10.1016/j.mssp.2022.107025 ↗
12. Optimization of Cu protrusion of wafer-to-wafer hybrid bonding for HBM packages application10.1016/j.mssp.2022.107063 ↗
13. Effect of current density on microstructure and mechanical property of Cu micro-cylinders electrodeposited in through silicon vias10.1016/j.matchar.2015.09.029 ↗
14. Characterizing interfacial sliding of through-silicon-via by nano-indentation10.1109/TDMR.2017.2681580 ↗
15. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
16. Reverse analysis of constitutive properties of sintered silver particles from nanoindentations10.1016/j.ijsolstr.2020.01.014 ↗
17. Determination of mechanical properties of Bi12TiO20 crystals by nanoindentation10.1016/j.mssp.2021.106389 ↗
18. Mechanical properties of U-Cu intermetallic compound measured by nanoindentation10.3390/ma11112215 ↗
19. Effect of copper TSV annealing on via protrusion for TSV wafer fabrication
20. Influence of annealing conditions on the mechanical and microstructural behavior of electroplated Cu-TSV10.1088/0960-1317/20/4/045032 ↗
21. Microstructure and hardness of electrodeposited copper microcylinders in through‐silicon via by direct current power10.1049/mnl.2015.0519 ↗
22. Effect of thermal treatment on the mechanical properties of Cu specimen fabricated using electrodeposition bath for through-silicon-via filling10.1016/j.mee.2013.09.007 ↗
23. Computational modeling of the forward and reverse problems in instrumented sharp indentation10.1016/S1359-6454(01)00295-6 ↗
24. Correlation of microstructure and constitutive behaviour of sintered silver particles via nanoindentation
25. A combined experimental and finite element approach for determining mechanical properties of aluminium alloys by nanoindentation10.1016/j.commatsci.2010.06.018 ↗
26. Constitutive modeling of δ-phase zircaloy hydride based on strain rate dependent nanoindentation and nano-scale impact dataset10.1016/j.ijplas.2020.102787 ↗
27. Determining the constitutive behavior of nonlinear visco-elastic-plastic PMMA thin films using nanoindentation and finite element simulation10.1016/j.matdes.2020.109239 ↗
28. Experimental and numerical investigation of mechanical properties of electroplating copper filled in through silicon vias10.1109/TCPMT.2015.2506202 ↗
29. A study of creep behavior of TSV-Cu based on nanoindentaion creep test10.1017/jmech.2016.55 ↗
30. Constitutive modelling of annealing behavior in through silicon vias-copper10.1016/j.matchar.2021.111359 ↗
31. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
32. Measurement of stresses in Cu and Si around through-silicon via by synchrotron X-ray microdiffraction for 3-dimensional integrated circuits, Microelectron10.1016/j.microrel.2011.10.016 ↗
33. Experimental measurement of the effect of copper through-silicon via diameter on stress buildup using synchrotron-based X-ray source10.1007/s10853-015-9184-9 ↗
34. An ion beam layer removal method of determining the residual stress in the as-fabricated TSV-Cu/TiW/SiO2/Si interface on a nanoscale10.1016/j.microrel.2020.113826 ↗
35. The effect of the diffusion creep behavior on the TSV-Cu protrusion morphology during annealing10.1007/s10854-018-9720-x ↗
36. Bottom-up Cu filling of annular through silicon vias: microstructure and texture10.1016/j.electacta.2020.135612 ↗
37. In situ mechanical characterization of the mixed-mode fracture strength of the Cu/Si interface for TSV structures10.3390/mi10020086 ↗
38. Effects of interfacial layer-by-layer nanolayers on the stability of the Cu TSV: diffusion barrier, adhesion, conformal coating, and mechanical property10.1016/j.mssp.2018.04.008 ↗
39. Cu protrusion of different through-silicon via shapes under annealing process10.1007/s11665-021-05775-4 ↗
40. The experimental analysis and the mechanical model for the debonding failure of TSV-Cu/Si interface10.1016/j.microrel.2018.08.005 ↗
41. A novel lining method for eliminating plastic deformation and protrusion of copper in Cu-TSV using FEM analysis
42. The effect of pitch distance on the statistics and morphology of through-silicon via extrusion10.1109/TCPMT.2021.3078772 ↗
43. Protrusion of through-silicon-via (TSV) copper with double annealing processes
44. Deng · 2016 · 380
45. Heating rate dependence of the mechanisms of copper pumping in through-silicon vias
46. Cu pumping in TSVs: effect of pre-CMP thermal budget10.1016/j.microrel.2011.06.003 ↗
47. Elimination of the axial deformation problem of Cu-TSV in 3D integration10.1063/1.3527128 ↗
48. Scaling approach to conical indentation in elastic-plastic solids with work hardening10.1063/1.368196 ↗
49. Use of scaling functions to determine mechanical properties of thin coatings from microindentation tests10.1016/S0020-7683(00)00017-2 ↗
50. Predictive model to estimate the stress–strain curves of bulk metals using nanoindentation10.1016/j.triboint.2005.03.019 ↗
51. A new approach for reverse analyses in depth-sensing indentation using numerical simulation10.1016/j.actamat.2006.08.019 ↗
52. Reverse analysis of nano-indentation using different representative strains and residual indentation profiles10.1016/j.matdes.2009.03.030 ↗
53. Mechanism of the local Cu protrusion in Cu-filled through silicon vias under heat treatment
54. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
55. Corrigendum to “Twin boundary: stronger or weaker interface to resist fatigue cracking?”10.1016/j.scriptamat.2012.08.003 ↗
56. Subgrain formation in ultrasonic enhanced friction stir welding of aluminium alloy10.1016/j.matlet.2016.07.033 ↗
57. Evaluation of tensile stress-strain curve of electroplated copper film by characterizing indentation size effect with a single nanoindentation10.1007/s12540-017-6461-y ↗
58. Microstructure and nanoindentation hardness of shot-peened ultrafine-grained low-alloy steel10.1007/s42243-018-0061-z ↗
59. Effect of capped Cu layer on protrusion behaviors of through silicon via copper (TSV-Cu) under double annealing conditions: comparative study
60. Effects of grain size and shape on mechanical properties of nanocrystalline copper investigated by molecular dynamics10.1016/j.msea.2014.07.066 ↗
61. Micro-XRD characterization of a single copper filled through-silicon via10.1016/j.matlet.2015.08.140 ↗
62. Surface residual stress in amorphous SiO2 insulating layer on Si substrate near a Cu through-silicon via (TSV) investigated by nanoindentation10.1016/j.mssp.2021.106153 ↗
63. Measurement of residual-stress effect by nanoindentation on elastically strained (100) W10.1016/S1359-6462(03)00290-2 ↗
64. Effect of microstructure and anisotropy of copper on reliability in nanoscale interconnects10.1109/TDMR.2017.2655459 ↗
65. Continuous static recrystallization in ultrafine-grained copper processed by multi-directional forging10.1016/j.msea.2007.05.115 ↗