journal article·2022-06

Sensing property of limiting current oxygen sensor with (8YSZ)0.4(CeO2)0.6 dense diffusion barrier based on 8YSZ solid electrolyte

Yihang Dong, Xiaoming Sun, Anran Mu, Zhaoyang Liu, Guoxing Qiu, Xiaofang Zhang, Ye Han, Jianxu Ding, Xiangnan Wang

Publisher page

Abstract

In this manuscript, (8YSZ) 1-x(CeO 2) x (0 ≤ x ≤ 0.6), belonging to the cubic fluorite structure, was prepared by a co-precipitation method. We highlighted the effect of a dense diffusion barrier conductivity on the sensing performance by choosing the lowest conductivity of (8YSZ) 0.4(CeO 2) 0.6 as a dense diffusion barrier compared with the highest conductivity of (8YSZ) 0.9(CeO 2) 0.1 published. A sensor was fabricated using bonding Pt paste. Limiting current ( I L) platforms were obtained at different oxygen concentrations x(O 2) in a temperature range of 720–900 °C. The oxygen sensor had a smaller oxygen measurement range of 0–10% at 850 °C compared to (8YSZ) 0.9(CeO 2) 0.1 as a diffusion layer. These results showed that the higher oxide ion conductivity of the diffusion layer can achieve a wider oxygen measurement range, which can guide the search for new mixed conductor with higher oxide ion conductivity. The sensing performance of the oxygen sensor was not influenced by p(H 2O) and x(CO 2), which showed the sensor had a strong selectivity towards oxygen. Furthermore, the limiting current of the sensor remained stable during 144 h of detection.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Preparation of Y2O3-ZrO2-CeO2 solid solution by co-precipitation and its electrical property10.1016/j.physb.2021.412972 ↗
2. Conductivity and mixed conductivity of a novel dense diffusion barrier and sensing properties of limiting current oxygen sensors10.1039/D0DT00496K ↗
3. An Air-to-Fuel ratio estimation strategy for turbocharged spark-ignition engines based on sparse binary HEGO sensor measures and hybrid linear observers10.1016/j.conengprac.2020.104694 ↗
4. Tailoring oxygen sensing characteristics of Co3O4 nanostructures through Gd doping10.1016/j.ceramint.2019.12.211 ↗
5. Crystalline structure, electrical conductivity, and thermal expansion of La0.8Sr0.2Ga1-xCoxO3-δ and its application in a limiting current oxygen sensor10.1007/s10008-018-4042-8 ↗
6. Properties of limiting current oxygen sensor with La0.8Sr0.2Ga0.8Mg0.2O3-δ solid electrolyte and La0.8Sr0.2(Ga0.8Mg0.2)1-xCrxO3-δ dense diffusion barrier10.1016/j.ssi.2017.04.002 ↗
7. Dense diffusion barrier limiting current oxygen sensors10.1016/S0925-4005(98)00169-5 ↗
8. A high performance limiting current oxygen sensor with Ce0.8Sm0.2O1.9 electrolyte and La0.8Sr0.2Co0.8Fe0.2O3 diffusion barrier10.1016/j.electacta.2013.07.005 ↗
9. A novel limiting current oxygen sensor prepared by slurry spin coating10.1016/j.snb.2018.05.076 ↗
10. Recent progress in organic color-tunable phosphorescent materials10.1016/j.jmst.2021.04.039 ↗
11. Application and exploration of nanofibrous strategy in electrode design10.1016/j.jmst.2020.10.015 ↗
12. Carbon nanotube/carbon fiber electrodes via chemical vapor deposition for simultaneous determination of ascorbic acid, dopamine and uric acid10.1016/j.arabjc.2018.11.002 ↗
13. Coupling decreased polarization resistance Sr0.95Ti0.3Fe0.6Ni0.1O3-δ cathode with efficient metal supported Solid Oxide Fuel Cell10.1016/j.jpowsour.2021.229490 ↗
14. Characteristics of YCoO3-type perovskite oxide and application as an SOFC cathode10.1039/D0TA09487K ↗
15. Efficient strategy to boost the electrochemical performance of yttrium stabilized zirconia electrolyte solid oxide fuel cell for low-temperature applications10.1016/j.ceramint.2020.09.190 ↗
16. MOF-derived porous hollow Ni/C composites with optimized impedance matching as lightweight microwave absorption materials10.1007/s42114-021-00307-z ↗
17. Precise regulation of weakly negative permittivity in CaCu3Ti4O12 metacomposites by synergistic effects of carbon nanotubes and graphene
18. Qi · Adv. Compos. Hybrid. Mater. · 2021 · 4 · 122610.1007/s42114-021-00368-0 ↗
19. A flame retarded polymer-based composite solid electrolyte improved by natural polysaccharides10.1016/j.coco.2021.100774 ↗
20. Crystalline structure, microstructure and electrical characterizations of FeO1.5 doped YSZ10.1016/j.ceramint.2017.04.129 ↗
21. Crystal structure and electrical conductivity of {(ZrO2)0.92(Y2O3)0.08}1-x(CuO)x (x=0, 0.1, 0.2 and 0.3)10.1016/j.mssp.2021.105829 ↗
22. Ordered honeycomb-pattern membrane10.1002/cjoc.202000340 ↗
23. Tribological behavior and wear mechanism of Cu/CF/phenolic resin sandwich composites under current
24. Effect of the precipitating agent on the synthesis and sintering behavior of 20mol% Sm-doped ceria
25. Active and stable ceria-zirconia supported molybdenum oxide catalysts for cyclooctene epoxidation: effect of the preparation procedure10.1016/j.cattod.2019.10.036 ↗
26. Negative permittivity behavior in Ti3AlC2-polyimide composites and the regulation mechanism10.1007/s10854-021-05695-y ↗
27. Iron/epoxy random metamaterials with adjustable epsilon-near-zero and epsilon-negative property10.1007/s10854-021-06150-8 ↗
28. Preparation of hierarchical highly ordered porous films of brominated poly(phenylene oxide) and hydrophilic SiO2/C membrane via the breath figure method10.3390/ma11040481 ↗
29. A new application of CexZr1-xO2 as dense diffusion barrier in limiting current oxygen sensor10.1016/j.snb.2019.01.086 ↗
30. A limiting current oxygen sensor constituted of (CeO2)0.95(Y2O3)0.05 as solid electrolyte layer and (CeO2)0.75(ZrO2)0.25 as dense diffusion barrier layer10.3390/s19163511 ↗
31. Diffusion kinetics mechanism of oxygen ion in dense diffusion barrier limiting current oxygen sensors10.1016/j.jallcom.2020.157465 ↗
32. Preparation and electrical property of CaZr0.7M0.3O3 (M=Fe, Cr and Co) dense diffusion barrier for application in limiting current oxygen sensor10.1016/j.snb.2018.03.097 ↗
33. The effect of Fe doping on the electrical conductivities of CaZrO3 and its sensing performance in limiting current oxygen sensor10.1016/j.jallcom.2018.07.281 ↗
34. A limiting current oxygen sensor prepared by a co-pressing and co-sintering technique10.1016/j.snb.2018.09.007 ↗
35. A novel method for preparing dense diffusion barrier limiting current oxygen sensor10.1111/jace.15302 ↗