The effect of Multi Quantum Well growth regime transition on MQW/p-GaN structure and light emitting diode (LED) performance
Source abstract
Abstract
Abstract This work presents an interesting observation on a possible growth regime transition from diffusion-limited to desorption-limited at Multi-Quantum Well (MQW) growth structure. In common practices, this transition is normally observed by increasing the growth temperature. However, in this work, this phenomenon is noticed by increasing the V/III ratio during the Indium Gallium Nitride/Gallium Nitride (InGaN/GaN) MQW growth process. By increasing the nitrogen (N)-precursors, the V/III of MQW growth structure was varied at three different ratios of 5109, 6387 and 7664 respectively. The X-ray Diffraction (XRD) peaks measured on these three devices reveals the highest Indium (In) incorporation of ~11.2% is obtained at 5109 ratios followed by 6387 ratios with ~5.0% and ~0.0% incorporation for 7664 ratios. Additionally, the EDX mapping also discloses the presence of In element on the p-GaN surface and it reduces significantly with the increase of the MQW V/III ratios. This trend implies the MQW growth process was occurred under diffusion-limited regime, which also affects the p-GaN upper layer. However, XRD results shows that the increment of MQW V/III ratios depreciates the MQW thicknesses, which manifests that the growth condition changed to metal-limited or N-rich regime, where the important reactants start to desorb from the sample. This leads to the low growth rate of InGaN/GaN layer and degrades the devices performance. The blue shift of InGaN peaks in photoluminescence spectra has support the notion of In reduction at high MQW V/III ratios. At 20 mA, the devices of 5109 and 6387 ratios with a forward voltage of 3.57 V and 3.95 V produce electroluminescence peak at 443.74 nm and 487.45 nm, respectively. Despite the 5109 sample exhibits the highest In percentage, green speckles were produced at low optical threshold voltage due to the proliferation of localization states induced by the In clusters. The device also experiences the higher reverse current leakage compared to 6387 device due to higher threading dislocation density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Ga2O3 and related materials · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Electroluminescence properties of InGaN/GaN multiple quantum well-based LEDs with different indium contents and different well widths
2. Enhanced device performance of GaInN-based green light-emitting diode with sputtered AlN buffer layer10.3390/app9040788 ↗
3. Probing alloy formation using different excitonic species: the particular case of InGaN
4. Characteristics of InGaN-based UV/Blue/Green/Amber/Red light-emitting diodes10.1143/JJAP.38.3976 ↗
5. Control of quantum-confined Stark effect in InGaN-based quantum wells
6. Efficiency drop in green InGaN/GaN light emitting diodes: the role of random alloy fluctuations
7. MOVPE growth of InxGa1-xN (x ~ 0.4) and fabrication of homo-junction solar cells10.1016/j.jmst.2012.12.005 ↗
8. Daami · 2019 · 21
9. Thermodynamic analysis of InxGa1-xN alloy composition grown by metalorganic vapor phase epitaxy
10. Investigation of NH3 input partial pressure for N-polarity InGaN growth on GaN substrates by tri-halide vapor phase epitaxy10.7567/JJAP.55.05FA01 ↗
11. Theoretical analyses of in incorporation and compositional instability in coherently grown InGaN thin films
12. Effect of hydrogen during growth of quantum barriers on the properties of InGaN quantum wells10.1016/j.jcrysgro.2014.09.037 ↗
13. Increasing the indium incorporation efficiency during InGaN layer growth by suppressing the dissociation of NH310.1016/j.spmi.2016.12.025 ↗
14. Metal-organic chemical vapor deposition of high quality, high indium composition N-polar InGaN layers for tunnel devices10.1063/1.4983300 ↗
15. Microstructures produced during the epitaxial growth of InGaN alloys10.1016/j.jcrysgro.2009.12.018 ↗
16. Effect of indium content on performance and reliability of InGaN/GaN light-emitting diodes10.1063/1.3253754 ↗
17. A study of indium incorporation in In-rich InGaN grown by MOVPE10.1016/j.apsusc.2009.11.081 ↗
18. The influence of ammonia on the growth mode in InGaN/GaN heteroepitaxy10.1016/j.jcrysgro.2004.08.072 ↗
19. MOVPE growth optimization of high quality InGaN films
20. NH 3-rich growth of InGaN and InGaN/GaN superlattices by NH 3-based molecular beam epitaxy10.1016/j.jcrysgro.2012.02.036 ↗
21. InGaN: an overview of the growth kinetics, physical properties and emission mechanisms10.1016/j.spmi.2007.05.001 ↗
22. MOVPE growth of InGaN/GaN multiple quantum wells for the blue laser diode applications10.1016/j.jcrysgro.2006.10.161 ↗
23. Effects of ammonia flow at growth temperature ramping process on optical properties of InGaN/GaN multiple quantum wells10.1016/S0022-0248(03)01109-6 ↗
24. Effect of the growth rate and the barrier doping on the morphology and the properties of InGaN/GaN quantum wells10.1016/S0022-0248(98)00680-0 ↗
25. Influence of growth conditions on the V-defects in InGaN/GaN MQWs10.1088/1674-4926/32/10/103001 ↗
26. The influence of the growth rate and V/III ratio on the crystal quality of InGaAs/GaAs QW structures grown by MBE and MOCVD methods10.1016/j.jcrysgro.2009.07.032 ↗
27. Growth and characterization of In-based nitride compounds10.1016/S0022-0248(97)00069-9 ↗
28. Investigation on the corrosive effect of NH 3 during InGaN/GaN multi-quantum well growth in light emitting diodes
29. Thermal etching effects on InGaN/GaN and GaN/AIGaN quantum well structures during metalorganic chemical vapor deposition
30. Erratum: GaN evaporation in molecular beam epitaxy environment10.1063/1.123691 ↗
31. Numerical simulation of GaN growth in a MOCVD process, in: ASME 2011
32. Indium incorporation and surface segregation during InGaN growth by molecular beam epitaxy
33. Surface structures and growth kinetics of InGaN(0001) grown by molecular beam epitaxy
34. Ammonia flux tailoring on the quality of AlN epilayers grown by pulsed atomic-layer epitaxy techniques on (0 0 0 1)-oriented sapphire substrates via MOCVD10.1039/C9CE00014C ↗
35. Smooth surface morphology and low dislocation density of p-GaN using indium-assisted growth10.1007/s00339-014-8384-5 ↗
36. Structure and formation mechanism of V defects in multiple InGaN/GaN quantum well layers10.1063/1.2180532 ↗
37. Studies on the effect of ammonia flow rate induced defects in gallium nitride grown by MOCVD10.1016/j.jcrysgro.2010.07.063 ↗
38. Dependencies of the emission behavior and quantum well structure of a regularly-patterned, InGaN/GaN quantum-well nanorod array on growth condition10.1364/OE.22.017303 ↗
39. Evaluation of performance of InGaN/GaN light-emitting diodes fabricated using NH3 with intentionally added H2O10.1143/JJAP.48.062102 ↗
40. Comparison of blue and green InGaNGaN multiple-quantum-well light-emitting diodes grown by metalorganic vapor phase epitaxy10.1063/1.1866634 ↗
41. Investigation of optoelectronic characteristics of indium composition in InGaN-based light-emitting diodes10.1088/2053-1591/aaff15 ↗
42. High-indium-content InGaN/GaN multiple-quantum-well light-emitting diodes10.1143/JJAP.42.2281 ↗
43. An InGaN/GaN superlattice to enhance the performance of green LEDs: exploring the role of V-Pits
44. Reverse leakage current characteristics of InGaN/GaN multiple quantum well ultraviolet/blue/green light-emitting diodes10.7567/JJAP.57.051003 ↗
45. Highly efficient and reliable high power LEDs with patterned sapphire substrate and strip-shaped distributed current blocking layer10.1016/j.apsusc.2015.07.194 ↗
46. InGaN light-emitting diodes: efficiency-limiting processes at high injection
47. Study on efficiency droop in InGaN/GaN light-emitting diodes based on differential carrier lifetime analysis10.1063/1.4939593 ↗