journal article·2025-08

Effects of a 50 nm AlN intermediate layer on the properties of Al1-xScxN films with varying Sc concentrations

Huanneng Zhu, Jin Wu, Zhenhuai Yang, Kesheng Guo, Jing Liu, Chuandong Zhang, Jie Bai, Hong Liu, Qiang Hu, Qiang Wang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Acoustic Wave Resonator Technologies · GaN-based semiconductor devices and materials · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Preparation, characterization, and application of AlN/ScAlN composite Thin films10.3390/mi14030557 ↗
2. C-axis-tilted ScAlN films grown on silicon substrates for surface acoustic wave devices10.35848/1347-4065/ac4a00 ↗
3. Micro-structural and optical properties of reactive magnetron sputtered aluminum nitride (AlN) nanostructured films10.1016/j.cap.2010.06.016 ↗
4. Microstructural and piezoelectric properties of ZnO films10.1016/j.mssp.2022.106680 ↗
5. Effect of deposition temperature on the microstructure and surface morphology of c-axis oriented AlN films deposited on sapphire substrate by RF reactive magnetron sputtering10.1016/j.spmi.2012.08.003 ↗
6. Effects of crystal orientation, substrate type, and substrate temperature on residual stress of AlN thin films deposited by different deposition methods10.1007/s40042-024-01008-8 ↗
7. Epitaxial growth of single-crystalline AlN layer on Si(111) by DC magnetron sputtering at room temperature10.7567/JJAP.57.060306 ↗
8. AlN films deposited by dc magnetron sputtering and high power impulse magnetron sputtering for SAW applications10.1088/0022-3727/48/14/145307 ↗
9. Wave propagation direction and c-axis tilt angle Influence on the Performance of ScAlN/Sapphire based SAW Devices10.1109/TUFFC.2016.2539226 ↗
10. Thermal conductivity of AlN thin films deposited by RF magnetron sputtering10.1016/j.mssp.2011.04.007 ↗
11. High-quality c-axis oriented Al(Sc)N thin films prepared by magnetron sputtering10.1016/j.tsf.2023.140000 ↗
12. The simulation of resonant mode and effective electromechanical coupling coefficient of Lithium niobate crystal with different orientations10.1088/1742-6596/1637/1/012064 ↗
13. Deposition, characterization, and modeling of scandium-doped aluminum nitride thin film for piezoelectric devices10.3390/ma14216437 ↗
14. Influence of growth parameters and systematical analysis on 8-inch piezoelectric AlN thin films by magnetron sputtering10.1016/j.mssp.2023.107895 ↗
15. Sputter deposition of stress-controlled piezoelectric AlN and AlScN films for ultrasonic and energy harvesting applications10.1109/TUFFC.2014.3040 ↗
16. Effect of seed layer with low lead content on electrical properties of PZT thin films
17. Influence of growth temperature and scandium concentration on piezoelectric response of scandium aluminum nitride alloy thin films10.1063/1.3251072 ↗
18. Thickness dependence of Al0.88Sc0.12N thin films grown on silicon10.1016/j.tsf.2019.02.023 ↗
19. Demonstration of lateral epitaxial growth of AlN on Si (1 1 1) at low temperatures by pulsed reactive sputter epitaxy10.1016/j.jcrysgro.2021.126250 ↗
20. Preparation of ScAlN films as a function of sputtering atmosphere10.1007/s10854-016-4359-y ↗
21. Deposition, characterization, and modeling of scandium-doped aluminum nitride thin film for piezoelectric devices
22. Structure and optical properties of AlN crystals grown by metal nitride vapor phase epitaxy with different V/III ratios10.1021/acsomega.2c01890 ↗
23. Oxygen defect dominated photoluminescence emission of ScxAl1−xN grown by molecular beam epitaxy10.1063/5.0035026 ↗
24. Epitaxial ScAlN grown by molecular beam epitaxy on GaN and SiC substrates10.1063/1.4981807 ↗
25. Lattice parameters of ScxAl1−xN layers grown on GaN(0001) by plasma-assisted molecular beam epitaxy10.1063/5.0137873 ↗
26. Confinement of excitons within GaN 1D nanoarchitectures formed on AlN molecular steps10.1002/adom.202302506 ↗
27. High-pure AlN crystalline thin films deposited on GaN at low temperature by plasma-enhanced ALD10.1016/j.vacuum.2023.112114 ↗
28. High crystal quality and low residual stress composite piezoelectric films prepared by a two-step method10.1088/1361-6439/acf2a8 ↗
29. Wurtzite structure Sc1−xAlxN solid solution films grown by reactive magnetron sputter epitaxy: structural characterization and first-principles calculations10.1063/1.3448235 ↗
30. Co-sputtering of Al1-xScxN thin films on Pt(111):a characterization by Raman and IR spectroscopies10.1007/s10853-020-05244-8 ↗
31. The relationship between annealing and nitrogen flow ratios during magnetron sputtering of AlN films10.1007/s00339-022-06311-4 ↗
32. Experimental determination of the electro-acoustic properties of thin film AlScN using surface acoustic wave resonators10.1063/1.5094611 ↗
33. Preparation of YbAlN piezoelectric thin film by sputtering and influence of Yb concentration on properties and crystal structure10.1016/j.ceramint.2021.02.177 ↗
34. Local environment of Sc and Y dopant ions in aluminum nitride thin films10.1021/acsaelm.3c01390 ↗
35. Analysis of lattice deformation originated from residual stress on performance of aluminum nitride-based bulk acoustic wave resonators10.1016/j.compstruct.2024.118203 ↗
36. Controlling residual stress and suppression of anomalous grains in aluminum scandium nitride films grown directly on silicon10.1109/JMEMS.2022.3167430 ↗
37. Effect of substrate temperature and bias voltage on the properties in DC magnetron sputtered AlN films on glass substrates10.1007/s10854-015-4125-6 ↗
38. Influence of sputtering parameters on structures and residual stress of AlN films deposited by DC reactive magnetron sputtering at room temperature10.1016/j.jcrysgro.2012.10.008 ↗
39. Effects of Cr doping on the mechanical properties of AlN films grown by the co-sputtering technique10.1016/j.ceramint.2018.10.058 ↗
40. Reduction of residual stress in AlN thin films synthesized by magnetron sputtering technique10.1016/j.matchemphys.2017.07.072 ↗
41. Micro-magnetic evaluation of micro residual stresses of the IInd and IIIrd order10.1016/j.ndteint.2008.11.007 ↗
42. Residual stresses in thin film systems: effects of lattice mismatch, thermal mismatch and interface dislocations10.1016/j.ijsolstr.2013.06.022 ↗
43. Stoney formula: Investigation of curvature measurements by optical profilometer
44. Residual stress reduction in piezoelectric Sc0.4Al0.6N films by variable-pressure sputtering from 0.4 to 1.0 Pa10.1016/j.tsf.2019.137625 ↗
45. Influence of alloying and structural transition on the directional elastic and isotropic thermodynamic properties of wurtzite and layered hexagonal ScxAl1−xN crystals10.1063/5.0120141 ↗
46. First-principles calculation of electroacoustic properties of wurtzite (Al,Sc)N10.1103/PhysRevB.103.115204 ↗
47. Elastic modulus and coefficient of thermal expansion of piezoelectric Al1−xScxN (up to x = 0.41) thin films10.1063/1.5040190 ↗
48. Realization of ferroelectricity in sputtered Al1-xScxN films with a wide range of Sc content10.1016/j.mtcomm.2024.108966 ↗
49. High mobility and high thermoelectric power factor in epitaxial ScN thin films deposited with plasma-assisted molecular beam epitaxy10.1063/5.0004761 ↗
50. Effects of high-temperature thermal annealing on the crystal structure and phase separation in sputtered ScAlN thin films10.1016/j.jallcom.2024.174997 ↗
51. Influence of AlN buffer layer on molecular beam epitaxy growth of wurtzite Al1−xScxN thin films10.1007/s12034-020-02290-5 ↗
52. Temperature dependence of stress and optical properties in AlN films grown by MOCVD10.3390/nano11030698 ↗
53. Optical and structural properties of aluminum nitride epi-films at room and High temperature10.3390/ma16237442 ↗
54. The effect of AlN/AlGaN superlattices on crystal and optical properties of AlGaN epitaxial layers10.1088/1674-4926/38/11/113002 ↗
55. Optical constants and band gap of wurtzite A1−xScxN/Al2O3 prepared by magnetron sputter epitaxy for scandium concentrations up to x = 0.4110.1063/1.5101043 ↗
56. Structural and optical properties of epitaxial ScxAl1−xN coherently grown on GaN bulk substrates by sputtering method10.1063/5.0213662 ↗
57. Molecular beam epitaxy and characterization of wurtzite ScxAl1−xN
58. Epitaxial lattice-matched AlScN/GaN distributed bragg reflectors10.1063/5.0176707 ↗
59. Band alignment of Sc(x)Al(1-x)N/GaN heterojunctions10.1021/acsami.0c15912 ↗
60. Influence of high-temperature AlN intermediate layer on the optical properties of MOCVD grown AlGaN films10.1088/2053-1591/aa5ad7 ↗
61. Bandgap in Al1−xScxN10.1063/1.4795784 ↗