Organic pollutants photodegradation increment with use of TiO2 nanotubes decorated with transition metals after pulsed laser treatment
Source abstract
Abstract
Among various titanium(IV) oxide (TiO 2 , titania) structures, 1D nanotubes (TiO 2 NTs) produced during the two-electrode anodization process, are extensively utilized in sensors or supercapacitors as well as in photo(electro)catalytic water splitting. However, due to wide bandgap and fast electron-hole recombination additional modifications, mostly concerned on materials surface, are required. According to the recent research, TiO 2 NTs photo(electro)catalytic characteristic were markedly improved by the combination of surface decoration with transition metal nanoparticles further treated with the laser beam. Nevertheless, until recently, the photocatalytic ability of laser-treated TiO 2 NTs for recalcitrant chemicals degradation were hardly described. In this regard, our work focuses on obtaining long, about 7.3 μm TiO 2 NTs (L-TiO 2 NTs), together with their photoactivity and physicochemical characteristics, as well as their alterations following surface modification utilizing transition metals (tungsten, chromium and nickel) together with laser treatment. Obtained L-TiO 2 NTs are characterized by over 13.5 times larger BET surface area in comparison to reference spaced TiO 2 NTs with approximately 2 μm length (0.61 m 2 g −1 and 0.05 m 2 g −1 , respectively). This allowed for increasing of the materials photocatalytic activity in both UV–vis and vis light. Additionally, phenol photodegradation reached up to 34% (0.21·10 −2 min −1) for tungsten-modified titania after laser annealing at 20 mJ cm 2 fluence. The reaction mechanism research revealed that reduction of organic pollutants concentration was primarily caused by superoxide radical anions •O 2 −. Furthermore, obtained modified L-TiO 2 NTs showed remarkable durability without losing their initial activity over ten photocatalytic cycles.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Laser-Ablation Synthesis of Nanoparticles · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Anchoring ultra-small TiO2 quantum dots onto ultra-thin and large-sized Mxene nanosheets for highly efficient photocatalytic water splitting10.1016/j.ceramint.2021.04.192 ↗
2. Construction 0D TiO2 nanoparticles/2D CoP nanosheets heterojunctions for enhanced photocatalytic H2 evolution activity10.1016/j.jmst.2020.04.026 ↗
3. Synthesis of nanocrystalline TiO2 nanorods via hydrothermal method: an efficient photoanode material for dye sensitized solar cells10.1016/j.jcrysgro.2016.11.004 ↗
4. Laser-assisted modification of titanium dioxide nanotubes in a tilted mode as surface modification and patterning strategy10.1016/j.apsusc.2019.145143 ↗
5. Bulk production of porous TiO2 nanowires by unique solvo-plasma oxidation approach for combating biotic and abiotic water contaminants10.1007/s10854-021-06642-7 ↗
6. Single‐crystalline TiO2(B) nanobelts with unusual large exposed {100} facets and enhanced Li-storage capacity
7. Solvothermal growth of {0 0 1} exposed anatase nanosheets and their ability to mineralize organic pollutants. The effect of alcohol type and content on the nucleation and growth of TiO2 nanostructures10.1016/j.apsusc.2021.150360 ↗
8. Photoelectrochemical performance of TiO2 photoanodes: nanotube versus nanoflake electrodes10.1016/j.elecom.2021.106937 ↗
9. Customizing new titanium dioxide nanoparticles with controlled particle size and shape distribution: a feasibility study toward reference materials for quality assurance of nonspherical nanoparticle characterization
10. In-situ construction of 3D TiO2 photoelectrode with multilevel facet heterojunctions towards the efficient removal of bisphenol A10.1039/D1CC02776J ↗
11. The geometry of free-standing titania nanotubes as a critical factor controlling their optical and photoelectrochemical performance10.1016/j.surfcoat.2020.125628 ↗
12. Scalable route toward superior photoresponse of UV-Laser-Treated TiO2 nanotubes10.1021/acsami.9b19206 ↗
13. The anodization of thin titania layers as a facile process towards semitransparent and ordered electrode material10.3390/nano12071131 ↗
14. Parameters affecting the photocatalytic degradation of dyes using TiO2: a review10.1007/s13201-015-0367-y ↗
15. Internal anodization of porous Ti to fabricate immobilized TiO2 nanotubes with a high specific surface area10.1016/j.elecom.2022.107201 ↗
16. What is Degussa (Evonic) P25? Crystalline composition analysis, reconstruction from isolated pure particles and photocatalytic activity test10.1016/j.jphotochem.2010.07.024 ↗
17. Fabrication and photodegradation properties of TiO2 nanotubes on porous Ti by anodization10.1016/S1003-6326(14)63386-0 ↗
18. A facile method to crystallize amorphous anodized TiO2 nanotubes at low temperature10.1021/am200685s ↗
19. Ultralong, small-diameter TiO2 nanotubes achieved by an optimized two-step anodization for efficient dye-sensitized solar cells10.1021/am404966e ↗
20. A facile method for Tauc exponent and corresponding electronic transitions determination in semiconductors directly from UV–Vis spectroscopy data10.1016/j.optmat.2022.112205 ↗
21. Ordered TiO2 nanotubes with improved photoactivity through self-organizing anodization with the addition of an ionic liquid: effects of the preparation conditions10.1021/acssuschemeng.9b03589 ↗
22. Insights into the intrinsic creation of heterojunction-based ordered TiO2 nanotubes obtained from the one-step anodic oxidation of titanium alloys10.1021/acs.jpcc.0c08621 ↗
23. Preparation of g-C3N4/Ag/TiO2 NTs and photocatalytic degradation of ceftazidine, Chinese
24. Linking optical and electronic properties to photoresponse of heterojunctions based on titania nanotubes and chromium, molybdenum, and tungsten oxides10.1016/j.optmat.2022.113183 ↗
25. Synthesis and study of enhanced electrochemical properties of NiO nanoparticles deposited on TiO2 nanotubes10.1002/aoc.6795 ↗
26. Enhanced photocatalytic properties of TiO2 nanotube arrays with Cr2O3 nanoparticles under visible light10.3938/jkps.61.759 ↗
27. Novel one-step preparation of tungsten loaded TiO2 nanotube arrays with enhanced photoelectrocatalytic activity for pollutant degradation and hydrogen production10.1016/j.catcom.2013.03.009 ↗
28. The interaction of the pulsed laser irradiation with titania nanotubes - theoretical studies on the thermal effect10.1016/j.ijthermalsci.2020.106800 ↗
29. The in-depth studies of pulsed UV laser-modified TiO2 nanotubes: the influence of geometry, crystallinity, and processing parameters10.3390/nano10030430 ↗
30. Inducing and probing non-thermal transitions in semiconductors using femtosecond laser pulses10.1038/nmat767 ↗
31. The pulsed laser ablation synthesis of colloidal iron oxide nanoparticles for the enhancement of TiO2 nanotubes photo-activity10.1016/j.apsusc.2020.147097 ↗
32. Rapid development of the photoresponse and oxygen evolution of TiO2 nanotubes sputtered with Cr thin films realized via laser annealing10.1016/j.jallcom.2021.160316 ↗
33. Laser induced formation of copper species over TiO2 nanotubes towards enhanced water splitting performance10.1016/j.ijhydene.2020.05.054 ↗
34. Nanostructure of the laser-modified transition metal nanocomposites for water splitting10.1088/1361-6528/ac512a ↗
35. Antibacterial properties of laser-encapsulated titanium oxide nanotubes decorated with nanosilver and covered with chitosan/Eudragit polymers10.1016/j.bioadv.2022.212950 ↗
36. Review on robust laser light interaction with titania – patterning, crystallisation and ablation processes10.1016/j.progsolidstchem.2020.100297 ↗
37. Formation of the hollow nanopillar arrays through the laser-induced transformation of TiO2 nanotubes10.1038/s41598-020-77309-2 ↗
38. Raman spectroscopy of titania (TiO2) nanotubular water-splitting catalysts
39. Anodic oxidation synthesis of one-dimensional TiO2 nanostructures for photocatalytic and field emission properties10.1155/2014/831752 ↗
40. Optimized spacing between TiO2 nanotubes for enhanced light harvesting and charge transfer10.1002/celc.201801136 ↗
41. Efficiently visible-light driven photoelectrocatalytic oxidation of as(III) at low positive biasing using Pt/TiO2 nanotube electrode10.1186/s11671-016-1248-5 ↗
42. Nitrogen-doped TiO2 nanotube arrays with enhanced photoelectrochemical property
43. Optical and electrical characterization of TiO2 nanotube arrays on titanium substrate10.1016/j.apsusc.2005.02.035 ↗
44. Effect of the anodization parameters on TiO2 nanotubes characteristics produced in aqueous electrolytes with CMC10.1016/j.apsusc.2018.11.097 ↗
45. A review: fundamental aspects of silicate mesoporous materials10.3390/ma5122874 ↗
46. Hydrogen permeation using nanostructured silica membranes10.2495/SDP150381 ↗
47. Preparation and characterization of defective TiO2. The effect of the reaction environment on titanium vacancies formation10.3390/ma13122763 ↗
48. Highly stable organic-inorganic junction composed of hydrogenated titania nanotubes infiltrated by a conducting polymer10.1039/C6RA01986B ↗
49. Adsorbate-Induced modification of surface electronic structure: pyrocatechol adsorption on the anatase TiO2 (101) and rutile TiO2 (110) surfaces10.1021/jp308614k ↗
50. Interpretation of oxygen 1s X-ray photoelectron spectroscopy of ZnO10.1021/acs.chemmater.3c00801 ↗
51. Synthesis, characterization and photocatalytic activity of mesoporous Na-doped TiO2 nano-powder prepared via a solvent-controlled non-aqueous sol-gel route10.1039/C7RA10108B ↗
52. Enhanced conversion efficiency of dye-sensitized solar cells using a CNT-incorporated TiO2 slurry-based photoanode10.1063/1.4908179 ↗
53. The fabrication of highly ordered and visible-light-responsive Fe-C-N-codoped TiO2 nanotubes10.1088/0957-4484/21/5/055706 ↗
54. Hybrid TiO2 – polyaniline photocatalysts and their application in building gypsum plasters10.3390/ma13071516 ↗
55. TiO2 Nanotube arrays: influence of tube length on the photocatalytic degradation of Paraquat10.1016/j.apcatb.2016.04.040 ↗
56. Modification and photocatalytic activity of open channel TiO2 nanotubes array synthesized by anodization process10.1016/j.apsusc.2020.147581 ↗
57. Enhanced photocatalytic activity of accordion-like layered Ti3C2 (MXene) coupled with Fe-modified decahedral anatase particles exposing {1 0 1} and {0 0 1} facets10.1016/j.cej.2021.130801 ↗
58. Superoxide ion: generation and chemical implications10.1021/acs.chemrev.5b00407 ↗
59. Raman spectrum of anatase, TiO210.1002/jrs.1250070606 ↗
60. Mono- and bimetallic (Pt/Cu) titanium(IV) oxide core–shell photocatalysts with UV/Vis light activity and magnetic separability10.1016/j.cattod.2020.05.034 ↗
61. Morphology- and crystalline composition-governed activity of titania-based photocatalysts: overview and perspective10.3390/catal9121054 ↗
62. Effects in band gap for photocatalysis in TiO2 support by adding gold and ruthenium10.3390/pr8091032 ↗
63. Gas‐phase removal of indoor volatile organic compounds and airborne microorganisms over mono ‐ and bimetal ‐ modified (Pt , Cu , Ag) titanium(IV) oxide nanocomposites
64. Photocatalytic energy storage ability of TiO2-WO3 composite prepared by wet-chemical technique10.1016/S1001-0742(09)60129-7 ↗
65. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
66. Investigation of electrocatalytic and photocatalytic ability of Cu/Ni/TiO2/MWCNTs Nanocomposites for detection and degradation of antibiotic drug Furaltadone10.1038/s41598-022-04890-z ↗
67. Photoreduction of hexavalent chromium during X‐ray photoelectron spectroscopy analysis of electrochemical and thermal films10.1149/1.2085340 ↗
68. A planar-defect-driven growth mechanism of oxygen deficient tungsten oxide nanowires10.1039/C3TA14163B ↗
69. The effect of calcination temperature on structure and photocatalytic properties of WO3/TiO2 nanocomposites10.1155/2016/3145912 ↗
70. Laser-Assisted synthesis and oxygen generation of nickel nanoparticles10.3390/ma13184068 ↗
71. Unraveling the photocatalytic properties of TiO2/WO3 mixed oxides10.1039/c9pp00163h ↗
72. On the origin of enhanced photocatalytic activity of copper‐modified titania in the oxidative reaction systems10.3390/catal7110317 ↗
73. Mechanism of singlet oxygen generation in visible-light-induced photocatalysis of gold-nanoparticle-deposited titanium dioxide10.1021/jp502440f ↗
74. Study of the effect of laser energy on the structural and optical properties of TiO2 NPs prepared by PLAL technique10.53293/jasn.2021.3600.1031 ↗
75. Reduction in the band gap of anodic TiO2 nanotube arrays by H2 plasma treatment10.1016/j.rinp.2018.06.046 ↗
76. Effects of fabrication conditions on the microstructure, pore characteristics and gas retention of pure tungsten prepared by laser powder bed fusion10.1016/j.ijrmhm.2020.105410 ↗
77. Phase transformation in tungsten oxide nanoplates as a function of post-annealing temperature and its electrochemical influence on energy storage10.1039/D0NA00423E ↗
78. One-step synthesis of few-layer WS2 by pulsed laser deposition10.1038/srep18116 ↗
79. XPS studies on surface reduction of tungsten oxide nanowire film by Ar+ bombardment10.1016/j.elspec.2012.01.004 ↗
80. Anodic TiO2 nanotubes: influence of top morphology on their photocatalytic performance10.1016/j.elecom.2012.05.037 ↗
81. Femtosecond laser mediated fabrication of micro/nanostructured TiO2-x photoelectrodes: hierarchical nanotubes array with oxygen vacancies and their photocatalysis properties10.1016/j.apcatb.2020.119231 ↗
82. Thermal annealing of ordered TiO2 nanotube arrays with water vapor-assisted crystallization under a continuous gas flow for superior photocatalytic performance10.1016/j.cej.2021.130619 ↗
83. Stability of titania nanotube arrays in aqueous environment and the related factors
84. A comprehensive review of techniques for biofunctionalization of titanium10.5051/jpis.2011.41.6.263 ↗