journal article·2024-03

The processing properties of photocatalysis assisted magnetorheological polishing based on TiO2–CI composite particles

Zhijun Chen, Jisheng Pan, Qiusheng Yan, Zhanliang Huang, Tianxin Luan

Publisher page

Abstract

With the development of photoelectric wafers tend to be high brittleness, high hardness and high chemical stability, a single magnetorheological polishing is difficult to meet the application requirements of photoelectric wafers. The quality and efficiency of magnetorheological polishing (MRP) on photoelectric wafer can be further improved by electric field assisted polishing or photocatalysis assisted polishing. In this paper, TiO 2 –CI functional composite particles were synthesized by sol-gel method, and a variety of polishing fluid with magnetic, electric and optical multi field effects were prepared. Silicon wafer and fused silica glass were polished by fixed-point centering polishing method, and the mechanism of photocatalytic assisted magnetorheological polishing (PMRP) was studied by comparing the polishing performance of the polishing fluid under different applied fields. The results show that when the polishing fluids prepared by oil-based liquid, the material removal rate is high under the action of a single magnetic field, but the polishing quality is poor. After polishing for 60 min, the height difference in surface profile ΔRz of fused silica glass is 0.67 μm. When the 2.5 kV/mm electric field is applied, the abrasive distribution can be controlled by electromagnetic composite field, and the stiffness distribution of polishing pad is more uniform, but it will reduce the material removal rate (MRR). Compared with the single magnetic field, the height difference in surface profile ΔRz is reduced by 73.1 % to 0.18 μm under the magnetoelectric compound field, which can obtain a more flattened surface quality. When light field and magnetic field are applied, water-based polishing fluid is used for polishing. Because UV light can induce photocatalytic reaction, the strong oxidation group ·OH generated in the photocatalytic reaction can oxidize the materials of workpiece surface into the lower hardness materials. Therefore, the material removal rate is increased by 249 % to 13.4 mg/h compared with that without light field, and the surface roughness was reduced by 69.32 % to 1.05 nm.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Vascular Malformations Diagnosis and Treatment · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Review on the progress of ultra-precision machining technologies10.1007/s11465-017-0455-9 ↗
2. Optical magnetic field microsensors based on GaN diode optopairs integrated with magnetic fluids10.1109/JLT.2023.3253672 ↗
3. Surface integrity and removal mechanism of silicon wafers in chemo-mechanical grinding using a newly developed soft abrasive grinding wheel10.1016/j.mssp.2017.02.001 ↗
4. Nanoindentation hardness of particles used in magnetorheological finishing (MRF)10.1364/AO.39.005194 ↗
5. A high performance magnetic fluid based on carbon modified magnetite (Fe3O4) nanospheres10.1016/j.jmmm.2020.166734 ↗
6. Magnetorheological suspension-based finishing technology
7. A review of challenges and solutions in the preparation and use of magnetorheological fluids10.1186/s40712-019-0109-2 ↗
8. Effects of pressure and shear stress on material removal rate in ultra-fine polishing of optical glass with magnetic compound fluid slurry10.1016/j.jmatprotec.2014.06.014 ↗
9. Material removal mechanism of cluster magnetorheological effect in plane polishing10.1007/s00170-015-7332-7 ↗
10. Research on material removal model and processing parameters of cluster magnetorheological finishing with dynamic magnetic fields10.1007/s00170-018-2747-6 ↗
11. Influence of H2 treatment on the surface morphology of SiC with different wafer orientation and doping10.1016/j.jcrysgro.2023.127105 ↗
12. Dislocation characterization in -plane GaN epitaxial layers on 6 inch Si wafer with a fast second-harmonic generation intensity mapping technique10.1088/1361-6528/acb4a0 ↗
13. Analysis of parameters affecting the surface roughness in sapphire wafer polishing using nanocrystalline-microcrystalline multilayer diamond cvd pellets10.1007/s12541-019-00057-5 ↗
14. Development of new mica abrasives suitable for high performance mechanochemical polishing of Si wafers10.4028/www.scientific.net/KEM.238-239.253 ↗
15. Effect and mechanism of oxidant on alkaline chemical mechanical polishing of gallium nitride thin films10.1016/j.mssp.2021.106272 ↗
16. Basic exploration and research on magnetoelectric synergistic rheological finishing10.1177/1045389X221088028 ↗
17. Study on the rheological and polishing properties of electromagnetic two-phase composite particles with abrasive characteristics10.1088/1361-665X/ac5478 ↗
18. A review on the CMP of SiC and sapphire wafers
19. Mechanical aspects of the chemical mechanical polishing process: a review10.1007/s12541-016-0066-0 ↗
20. Material removal process of single-crystal SiC in chemical-magnetorheological compound finishing10.1007/s00170-017-1098-z ↗
21. A magnetorheological fluid shaft seal with low friction torque10.1088/1361-665X/ab0834 ↗
22. Controlled-crystallinity of SiO2/TiO2 hollow nanoparticles and their electroresponsive behaviors10.1016/j.jiec.2021.08.023 ↗
23. Synthesis and enhanced photocatalytic activity of molybdenum, iron, and nitrogen triple-doped titania nanopowders10.1016/j.ceramint.2016.07.158 ↗
24. A novel core-shell silica@graphene straticulate structured antistatic anticorrosion composite coating10.1016/j.jallcom.2018.02.222 ↗
25. Study on the rheological properties and polishing properties of SiO2@CI composite particle for sapphire wafer10.1088/1361-665X/abb21c ↗
26. Two- and three-dimensional ordered structures formed by electro-magnetorheological colloids10.1016/j.physb.2003.08.017 ↗
27. A low sedimentation magnetorheological fluid based on plate-like iron particles, and verification using a damper test10.1088/0964-1726/23/2/027001 ↗
28. Comparison of Fenton, ultraviolet-Fenton and ultrasonic-Fenton processes on organics and colour removal from pre-treated natural gas produced water10.1007/s13762-017-1604-8 ↗
29. Chemical/mechanical balance management through pad microstructure in CMP10.1016/j.mee.2017.12.002 ↗