journal article·2024-02

Effect of aluminum content on plasma resistance and contamination particle generation in yttrium aluminum oxide coatings

Jongho So, Eunmi Choi, Minjoong Kim, Dongjin Lee, Jungpil Seo, Seonjeong Maeng, Chin-Wook Chung, Ju-Young Yun, Song-Moon Suh

Publisher page

Abstract

Yttrium aluminum oxide (YAO) has garnered interest due to its ability to protect the interior parts of process chambers from the corrosive effects of fluorine-based plasma. This ability is attributed to its low melting point, which enhances the internal bonding capabilities of the atmospheric plasma spray (APS) method. We explored the resistance of YAO coatings, with varying yttrium-to-aluminum content ratios, to fluorine-based plasma. These coatings were applied using the APS method and subsequently subjected to NF 3/O 2 gas. Our results revealed that a higher Al content ratio resulted in a decreased number of defects within the coating, which also led to selective etching at the initial Al 2O 3-rich sites, primarily creating relatively weak Al-F bonds and smaller particles. In particular, selecting an appropriate yttrium-to-aluminum content ratio significantly reduced the coating defects and enhanced the etch rate compared to coatings with a higher yttrium content ratio. This improvement was attributed to the balanced presence of Al-F and Y-F bonds. Furthermore, for coatings rich with the yttrium aluminum garnet (YAG) phase, the resistance to fluorine-based plasma was primarily influenced by the thickness of the APS-Y 2O 3 layer. This layer, used to augment adhesion to parts, relies on the low-temperature crystallization features of YAG. The findings of this study offer valuable insights for optimizing YAG coating in dry-etching processes requiring high-density APS coatings.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · ZnO doping and properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Plasmaless dry etching of silicon with fluorine-containing compounds10.1063/1.333834 ↗
2. Fluorine-based plasmas: main features and application in micro-and nanotechnology and in surface treatment
3. Preparation and characterization of sprayed-yttrium oxyfluoride corrosion protective coating for plasma process chambers10.3390/coatings8100373 ↗
4. Improvement of plasma resistance of anodic aluminum-oxide film in sulfuric acid containing cerium(IV) ion10.3390/coatings10020103 ↗
5. Plasma-resistance evaluation of yttrium oxyfluoride coating prepared by aerosol deposition method10.1111/ijac.13880 ↗
6. Plasma chemical behaviour of reactants and reaction products during inductively coupled CF4 plasma etching of SiO210.1088/0963-0252/18/4/045027 ↗
7. Plasma etching behavior of SF6 plasma Pre-treatment sputter-deposited yttrium oxide films
8. Microstructural evolution and mechanical properties of atmospheric plasma sprayed Y2O3 coating with state of in-flight particle10.1016/j.ceramint.2020.09.246 ↗
9. Tillmann · 2019 · 11
10. Effect of the microstructures of yttria ceramics on their plasma corrosion behavior10.1016/j.ceramint.2019.07.093 ↗
11. Influence of high-enthalpy atmospheric plasma spraying process parameters on microwave dielectric properties of Y2O3 coatings10.1007/s11666-020-01144-0 ↗
12. Plasma etching behavior of yof coating deposited by suspension plasma spraying in inductively coupled chf3/ar plasma10.3390/coatings10111023 ↗
13. Fabrication and plasma resistance properties of transparent YAG ceramics10.1016/j.ceramint.2011.11.023 ↗
14. Phase composition and microstructure of yttrium aluminum garnet (YAG) coatings prepared by suspension plasma spraying of Y2O3-Al2O3 powders10.1016/j.surfcoat.2013.07.058 ↗
15. Fujita · 2005
16. Surface analysis of chamber coating materials exposed to CF4/O2 plasma10.3390/coatings11010105 ↗
17. Fluoride-mediated corrosion mechanism of atmospheric-plasma-sprayed yttrium–aluminium garnet ceramic coatings10.1016/j.jeurceramsoc.2022.06.012 ↗
18. Plasma etching behavior of yttrium-aluminum oxide composite ceramics10.1111/ijac.13712 ↗
19. Contamination particles and plasma etching behavior of atmospheric plasma sprayed Y2O3 and YF3 coatings under NF3 plasma
20. Investigation of contamination particles generation and surface chemical reactions on Al2O3, Y2O3, and YF3 coatings in F-based plasma10.1016/j.apsusc.2023.157367 ↗
21. Microstructure and phase formation of atmospheric plasma sprayed YAG coatings10.1016/j.surfcoat.2023.129614 ↗
22. Pre-evaluation method for the spectroscopic properties of YAG bulk materials by sol–gel synthetic YAG powder10.1016/j.ceramint.2009.02.010 ↗
23. Characteristics of thermal oxidation on hot-pressed pure yttria ceramics10.4191/kcers.2013.50.3.180 ↗
24. Contamination particle behavior of aerosol deposited Y 2 O 3 and YF 3 coatings under NF 3 plasma
25. The effect of powder particle size on the corrosion behavior of atmospheric plasma spray-Y2O3 coating: unraveling the corrosion mechanism by fluorine-based plasma10.1016/j.apsusc.2022.154958 ↗
26. Fluorination mechanisms of Al2O3 and Y2O3 surfaces irradiated by high-density CF4∕O2 and SF6∕O2 plasmas10.1116/1.3112624 ↗
27. Lichtenberg · 2005
28. Metal oxide and carbide thermochemistry of Y+, Zr+, Nb+, and Mo+10.1063/1.472485 ↗
29. Spatio-temporal evolution of the dust particle size distribution in dusty argon rf plasmas10.1088/0963-0252/24/2/025029 ↗
30. Structure, chemistry and diffusion bonding of metal/ceramic interfaces10.1016/0304-3991(87)90045-3 ↗
31. Recent research advances in plasma spraying of bulk-like dense metal coatings with metallurgically bonded lamellae10.1007/s11666-022-01327-x ↗