journal article·2023-08

Influences of process parameters on chemical mechanical polishing effect of ZnGeP2 crystal

Qiang Xiong, Ziyuan Luo, Qiusheng Yan, Jiabin Lu, Jisheng Pan

Publisher page

Abstract

To obtain the ultra-smooth surface of ZnGeP 2 crystal (ZGP), the workpiece-abrasive-polishing pad contact model during polishing was established to calculate the load F w and the cutting depth h w of a single abrasive. The influences of polishing methods, abrasive hardness, abrasive size, polishing pressure, polishing time and other factors on the polishing effect were studied, and the mechanism underpinning the formation of surface morphology after polishing was revealed, and the mathematical model between material removal rate (MRR) and surface roughness (Ra) was established. The results show that the critical cutting depth h c of ZnGeP 2 crystal is 95.21 nm, when the polishing load is 5 N, the material removal under mechanical polishing and chemical mechanical polishing entails plastic removal. Compared with mechanical polishing, the MRR of chemical mechanical polishing is increased by 23.4% and Ra is decreased by 26.5%. The increases of abrasive hardness, abrasive size and polishing load will increase the cutting depth h w of the abrasive, resulting in the increases of MRR and Ra, but the influence forms of various factors are different. After optimizing the process parameters, the minimum Ra of ZnGeP 2 crystal is 0.76 nm. MRR and Ra will decrease significantly with the increase of polishing time, and there is a significant correlation between them.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Advances in nonlinear optical crystals for mid-infrared coherent sources10.1364/JOSAB.33.000D36 ↗
2. High repetition rate 102 W middle infrared ZnGeP2 master oscillator power amplifier system with thermal lens compensation10.1364/OL.44.000715 ↗
3. Large aperture single crystal ZnGeP2 for high-energy applications10.1016/j.jcrysgro.2007.11.151 ↗
4. Linear and nonlinear optical properties of ZnGeP2 crystal for infrared laser device applications: revisited10.1364/AO.42.004335 ↗
5. Growth of crack-free ZnGeP2 large single crystals for high-power mid-infrared OPO applications10.1016/j.jcrysgro.2013.11.079 ↗
6. Growth of ZnGeP2 single crystals by modified vertical Bridgman method for nonlinear optical devices10.1016/j.mssp.2017.03.014 ↗
7. Effect of postgrowth processing technology and laser radiation parameters at wavelengths of 2091 and 1064 nm on the laser-induced damage threshold in ZnGeP2 single crystal10.1070/QEL17389 ↗
8. Imaging of microdefects in ZnGeP2 single crystals by X-ray topography10.1016/j.jcrysgro.2020.125487 ↗
9. Theoretical study of the structural, elastic and thermodynamic properties of chalcopyrite ZnGeP210.1016/j.mssp.2015.03.047 ↗
10. Investigation of the process of optical damage of ZnGeP2 crystals using digital holography10.1007/s11182-019-01635-w ↗
11. Influence of After-Growth treatments on the optical parameters of teraherz ZnGeP2 Crystals10.1007/s11182-018-1314-9 ↗
12. Annealing and optical homogeneity of large ZnGeP2 single crystal
13. Surface finishing of ZnGeP2 single crystal by diamond tool turning method10.1016/j.optmat.2016.12.042 ↗
14. Study on the influence of anisotropy of ZnGeP2 single crystal on its surface cutting quality10.1016/j.optmat.2020.110383 ↗
15. Research on cutting mechanism of ZnGeP2 crystal under surface brittle-plastic transition by heating assistance10.1016/j.mssp.2020.105502 ↗
16. Study on etching of ZnGeP2 single crystals
17. Muller · 2014
18. A critical evaluation of indentation techniques for measuring fracture toughness: I, Direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
19. Ductile-regime grinding of brittle materials: experimental results and the development of a model
20. Effect of lapping slurry on critical cutting depth of spinel10.1016/j.apsusc.2015.04.092 ↗
21. Removal mechanism and surface quality of crystal semiconductor materials in scratching tests with Berkovich indenter10.1016/j.mssp.2019.104746 ↗
22. Study on critical cutting depth of brittle-plastic transition of ZnGeP2 crystal
23. A micro-contact and wear model for chemical-mechanical polishing of silicon wafers10.1016/S0043-1648(01)00871-7 ↗
24. An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow10.1115/1.555332 ↗
25. The prediction of friction and wear when a soft surface slides against a harder rough surface10.1016/0043-1648(95)06830-9 ↗
26. M.J. Mao, Q. Xu, J.L Liu, et al., Contact states of Workpiece-Abrasive particles-Polishing pad in cemented carbide CMP processes, China Mech. Eng. 32 (17) 2074–2081, doi:10.3969/j.issn.1004-132X.2021.17.008.