journal article·2025-03

Significantly enhanced thermoelectric properties of screen-printed Cu₀.₆Ni₀.₄ films for thermoelectric generators

Immanuel Paulraj, Vinothkumar Lourdhusamy, Chia-Jyi Liu

Publisher page

Abstract

Thermoelectric materials and devices are gaining recognition as a promising solution to the global energy crisis. However, widespread adoption is hindered by challenges such as high production costs, complex manufacturing techniques, and the need for extensive post-production treatments. Advancing the development of easily producible thermoelectric materials is essential to overcome these obstacles and enable practical applications. In this study, we address these challenges by designing functional film thermoelectric generators (TEGs) with significant potential for real-world use. Using the widely accessible screen-printing technique, we successfully fabricated n-type Cu-Ni alloy-based thick film TEGs in less than 10 minutes. The optimized Cu 0.6Ni 0.4 thick films exhibited an electrical resistivity of 0.15 mΩ-cm, a Seebeck coefficient of −66.48 μV/K, and a power factor of 28.64 μW/cm-K 2 at 700 K. The TEG device, composed of four pairs of p-legs (EG/NaHCO 3-treated PEDOT:PSS) and n-legs (Cu 0.6Ni 0.4), each measuring 4 mm × 0.005 mm, delivered a peak output power of 583.4 nW at a temperature difference of 140 K with a maximum power density of 182.3 μW/cm 2, demonstrating the device`s potential for practical energy harvesting applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Flexible thermoelectric materials and devices10.1016/j.apmt.2018.07.004 ↗
2. Handbook of greener synthesis of nanomaterials and compounds
3. Acido-treatment of PEDOT: PSS/Carbon Dots (CDots) nano-composite films for high thermoelectric power factor performance and generator10.1016/j.matchemphys.2020.123762 ↗
4. Enhanced thermoelectric properties of porous hybrid ZnSb/EG-treated PEDOT: PSS composites10.1016/j.jpowsour.2023.233096 ↗
5. Enhanced power factor of PEDOT: PSS films post-treated using a combination of ethylene glycol and metal chlorides and temperature dependence of electronic transport (325–450 K)10.1021/acsaem.0c02411 ↗
6. Enhanced thermoelectric performance of polycrystalline InSb1−xBix by using isoelectronic substitution on the Sb site10.1016/j.jallcom.2022.165949 ↗
7. Enhanced thermoelectric performance of band structure engineered GeSe1− xTex alloys10.1039/D0SE01788D ↗
8. Recent advances in energy harvesting from waste heat using emergent thermoelectric materials, Emerging Materials: design
9. Development of Cu2Se/Ag2(S, Se)-Based monolithic thermoelectric generators for low-grade waste heat energy harvesting10.1021/acsami.3c09823 ↗
10. Defect‐engineering‐stabilized AgSbTe2 with high thermoelectric performance
11. Enhanced performance of monolithic chalcogenide thermoelectric modules for energy harvesting via co-optimization of experiment and simulation10.1021/acsami.2c06349 ↗
12. High-performance skutterudite/half-heusler cascaded thermoelectric module using the transient liquid phase sintering joining technique10.1021/acsami.2c19137 ↗
13. Thermoelectric response of a screen printed silver-nickel thermocouple10.1016/j.mseb.2020.114929 ↗
14. Energy-efficient synthesis and thermoelectric properties of Ni1-xCrx (x= 0.08, 0.10, and 0.17) alloys10.1016/j.jallcom.2024.177569 ↗
15. High-performance flexible Bi2Te3 films based wearable thermoelectric generator for energy harvesting10.1016/j.energy.2019.03.060 ↗
16. Power factor enhancement of β-Zn4Sb3-InSb composites via arrays of pn junction: mixing p-type and n-type thermoelectric materials10.1016/j.jeurceramsoc.2023.09.061 ↗
17. Significantly enhanced thermoelectric performance of p-type Mg3Sb2 via Zn substitution on Mg (2) site: optimization of hole concentration through Ag doping10.1021/acsami.4c12868 ↗
18. Progress and perspectives in thermoelectric generators for waste-heat recovery and space applications10.1063/5.0166338 ↗
19. Optimizing GeTe-based thermoelectric generator for low-grade heat recovery10.1016/j.apenergy.2023.121584 ↗
20. High-performance wearable Bi2Te3-based thermoelectric generator10.3390/app13105971 ↗
21. Organic/Inorganic n-type PVDF/Cu0.6Ni0.4 hybrid composites for thermoelectric application: a thermoelectric generator made of 8 pairs of p-leg ZnSb/Sb and n-leg β-PVDF/Cu0.6Ni0.410.1016/j.cej.2022.137083 ↗
22. Enhancing the thermoelectric performance of Cu–Ni alloys by introducing carbon nanotubes
23. Low thermal conductivity and enhanced zT values of porous and nanostructured Cu1− xNix alloys10.1016/j.cej.2019.02.198 ↗
24. Investigation of thermoelectric properties of Ag2SxSe1− x (x= 0.0, 0.2 and 0.4)10.1007/s11664-019-07879-z ↗
25. Mixed-phase effect of a high Seebeck coefficient and low electrical resistivity in Ag2S10.1088/1361-6463/abcfe7 ↗
26. Effect of the annealing treatment on structural and transport properties of thermoelectric Sm y (Fex Ni1− x) 4Sb12 thin films10.1088/1361-6528/aca980 ↗
27. Anomalous electronic transport in ξ′-Al–Pd–Mn complex metallic alloy studied by spectral conductivity analysis10.1088/0953-8984/19/17/176212 ↗
28. Electronic transport of ZnSnSb2 for thermoelectric application10.1016/j.matpr.2021.09.301 ↗
29. Enhancing the thermoelectric power factor of Mg3Sb2 with Sn doping on electronegative sites of Sb: effects of reducing the electronegativity difference10.1016/j.matchemphys.2023.127379 ↗
30. Aqueous-solution synthesized p-type Cu2Se0.96Te0.04–x Ix/Cu2O composite and thermoelectric performance of TEG made of 6 pairs of p-leg Cu2Se0. 96Te0. 02I0.02/Cu2O composite and n-leg InSb0.94Bi0.0610.1021/acs.inorgchem.3c03774 ↗
31. Enhanced thermoelectric performance of p-type Mg(3-x)Zn(x)Sb(2)/Sb composites: the role of ZnSb/Sb composites10.1021/acsami.3c10418 ↗
32. Energy-efficient synthesis of porous n-type Pb1− xSnxSe1− y/(AgCl)z/Pb with high zT10.1016/j.jallcom.2023.172748 ↗
33. High performance of post-treated PEDOT:PSS thin films for thermoelectric power generation applications10.1021/acsami.1c13968 ↗
34. Optimization of the thermoelectric figure of merit in the conducting polymer poly (3, 4-ethylenedioxythiophene)10.1038/nmat3012 ↗
35. Boudouris · 2017
36. Preparation and thermoelectric properties of PEDOT:PSS coated Te nanorod/PEDOT: PSS composite films10.1016/j.orgel.2018.10.010 ↗
37. Preparation and characterization of Te/Poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate)/Cu7Te4 ternary composite films for flexible thermoelectric power generator10.1021/acsami.8b15252 ↗
38. Multifold enhancement of the output power of flexible thermoelectric generators made from cotton fabrics coated with conducting polymer10.1039/C7RA08663F ↗
39. Wet-spinning, and post-treatment of CNT/PEDOT: PSS composites for use in organic fiber-based thermoelectric generators10.1016/j.carbon.2018.03.041 ↗
40. A high performance flexible and robust printed thermoelectric generator based on hybridized Te nanowires with PEDOT: PSS10.1016/j.apenergy.2021.117004 ↗
41. A solution-processed TiS 2/organic hybrid superlattice film towards flexible thermoelectric devices10.1039/C6TA08838D ↗