journal article·2024-12

Introduction of Bi(Zn2/3Sb1/3)O3 to BaTiO3-based ceramics for high energy storage performance

Haiyao Ma, Zhonghua Dai, Yuanyuan Zheng, Chenxi Liu, Xin Zhao, Weiguo Liu, Yu Cong, Shuitao Gu

Publisher page

Abstract

In this study, (1- x)BaTiO 3- xBi(Zn 2/3Sb 1/3)O 3 ((1- x)BT- xBZS) ceramics were designed and tested. With the introduction of BZS, it was found that the grain size of the ceramics was increased, which increased the breakdown field strength ( E b) of the ceramics and further improved the energy storage density. The 0.84BT-0.16BZS ceramic achieved both high recoverable energy density ( W rec = 2.32 J/cm 3) and energy efficiency ( η = 89.7 %) at 620 kV/cm. In addition, excellent temperature stability (20-160 °C) and frequency stability (1–200 Hz) of recoverable energy density have been obtained under 300 kV/cm. A high power density of 28.93 MW/cm 3 and transient discharge time ( t 0.9 = 1.07 μs) were achieved for 0.84BT-0.16BZS ceramic under 200 kV/cm.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Tunable electronic and optical properties of GeC/g-C3N4 vdWH by electric field and biaxial strain10.1016/j.jpcs.2023.111782 ↗
2. High energy storage properties for dielectric composite by asymmetric three-layer films design10.1016/j.est.2024.112387 ↗
3. High energy storage characteristics for Ba0.9Sr0.1TiO3 (BST) doped Na0.7Bi0.1NbO3 (NBN) ceramics10.1016/j.est.2023.109044 ↗
4. Enhanced photoelectric properties for BiZn0.5Zr0.5O3 modified KNN-based lead-free ceramics10.1016/j.jallcom.2023.170639 ↗
5. Regulating energy storage performances of 0.85NaNbO3-0.15Bi(Zn2/3Nb1/3)O3 ceramics using BaTiO310.1016/j.jmat.2021.04.001 ↗
6. Effect of Sr(Zn1/3Nb2/3)O3 modification on the energy storage performance of BaTiO3 ceramics10.1016/j.ceramint.2021.01.102 ↗
7. Enhanced energy storage property and dielectric breakdown strength in Li+ doped BaTiO3 ceramics10.1016/j.jallcom.2020.158021 ↗
8. Tuning the microstructure of BaTiO3@SiO2 core-shell nanoparticles for high energy storage composite ceramics10.1016/j.jallcom.2019.01.009 ↗
9. Effect of BaO–Bi2O3–P2O5 glass additive on structural, dielectric and energy storage properties of BaTiO3 ceramics10.1016/j.matchemphys.2019.122434 ↗
10. Enhanced electrocaloric, pyroelectric and energy storage performance of BaCe Ti1−O3 ceramics10.1016/j.jeurceramsoc.2017.04.058 ↗
11. A strategy for high performance of energy storage and transparency in KNN-based ferroelectric ceramics10.1016/j.cej.2021.131959 ↗
12. An investigation of the dielectric energy storage performance of Bi(Mg2/3Nb1/3)O3-modifed BaTiO3 Pb-free bulk ceramics with improved temperature/frequency stability10.1016/j.ceramint.2019.06.166 ↗
13. Improved energy storage density and efficiency of (1−x)Ba0.85Ca0.15Zr0.1Ti0.9O3-xBiMg2/3Nb1/3O3 lead-free ceramics10.1016/j.cej.2020.128341 ↗
14. Grain size effect on piezoelectric properties of BaTiO 3 ceramics10.7567/JJAP.57.0902BB ↗
15. Ni-modified BaTiO3 film prepared by sol-gel with high energy storage performance
16. The effect of acceptor dopant on the memory effect of BaTiO3 ceramics10.1016/j.jallcom.2022.167182 ↗
17. Energy storage performance of lead-free Ba0.7Sr0.3TiO3 ceramics with doping Bi(Mg0.5Ti0.5)O310.1016/j.mssp.2023.108046 ↗
18. A bright new world of ferroelectrics: magic of spontaneous polarization10.1021/acsami.0c18276 ↗
19. Relaxor ferroelectric (Na0.5Bi0.5)0.4Sr0.6TiO3-based ceramics for energy storage application10.1016/j.ceramint.2020.01.154 ↗
20. High-entropy relaxor ferroelectric ceramics for ultrahigh energy storage10.1038/s41467-024-49107-1 ↗
21. Significant enhancement in breakdown strength and energy density of the BaTiO3/BaTiO3@SiO2 layered ceramics with strong interface blocking effect10.1016/j.jeurceramsoc.2017.06.028 ↗
22. Enhanced energy storage efficiency by modulating field-induced strain in BaTiO3-Bi(Ni2/3Ta1/3)O3 lead-free ceramics10.1016/j.ceramint.2021.04.290 ↗
23. Enhancement of energy storage performances in BaTiO3-based ceramics via introducing Bi(Mg2/3Sb1/3)O310.1016/j.est.2023.110102 ↗
24. Enhanced energy storage properties of Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics doped with BiFeO310.1016/j.jallcom.2022.168015 ↗
25. Large recoverable energy storage density and low sintering temperature in potassium‐sodium niobate‐based ceramics for multilayer pulsed power capacitors10.1111/jace.14728 ↗
26. Enhancement in dielectric, ferroelectric, and piezoelectric properties of BaTiO3- modified Bi0.5(Na0.4K0.1)TiO3 lead-free ceramics10.1016/j.jallcom.2019.152790 ↗
27. High-efficiency energy storage in Nd-doped (1-x)BiFeO3–xBaTiO3 relaxor ferroelectric ceramics10.1016/j.ceramint.2023.05.197 ↗
28. Improved energy storage performance of lead-free BaTi0.96Li0.04O2.94 ceramics via domain structure engineering10.1016/j.ceramint.2023.06.073 ↗
29. Highly -textured BaTiO3 ceramics with high piezoelectric performance prepared by vat photopolymerization
30. A novel route to produce BaTiO3 glass-ceramics with nanosized cubic BaTiO3 phase precipitating for high energy-storage applications10.1016/j.jeurceramsoc.2023.02.026 ↗
31. Crystal structure, dielectric, ferroelectric and energy storage properties of La-doped BaTiO3 semiconducting ceramics10.1142/S2010135X15500277 ↗
32. Simultaneously achieved temperature-insensitive high energy density and efficiency in domain engineered BaTiO3-Bi(Mg0.5Zr0.5)O3 lead-free relaxor ferroelectrics10.1016/j.nanoen.2018.07.055 ↗
33. Excellent energy storage properties realized in novel BaTiO3-based lead-free ceramics by regulating relaxation behavior10.1016/j.jmat.2023.02.014 ↗
34. Enhancement of energy storage performance in lead‐free relaxor ferroelectric ceramics via band structure engineering10.1111/jace.19266 ↗
35. Structural and multiferroic properties of Nd and Mn co-doped 0.55BiFeMnO3-0.45BaTiO3 ceramics with high energy storage efficiency10.1016/j.ceramint.2021.03.215 ↗
36. Grain size engineered high‐performance nanograined BaTiO 3 ‐based ceramics: experimental and numerical prediction10.1111/jace.17433 ↗
37. Recent progress on core-shell structured BaTiO3@polymer/fluorinated polymers nanocomposites for high energy storage: synthesis, dielectric properties and applications10.1016/j.pmatsci.2020.100670 ↗
38. Enhanced energy storage properties and stability of Sr(Sc0.5Nb0.5)O3 modified 0.65BaTiO3-0.35Bi0.5Na0.5TiO3 ceramics10.1016/j.cej.2020.125520 ↗
39. Effective strategy to achieve excellent energy storage properties in lead-free BaTiO 3 -based bulk ceramics10.1021/acsami.0c02832 ↗
40. Achieving superb electric energy storage in relaxor ferroelectric BiFeO3-BaTiO3-NaNbO3 ceramics via O2 atmosphere10.1016/j.jeurceramsoc.2023.07.081 ↗
41. Boosting energy storage performance of BiFeO 3 -based multilayer capacitors via enhancing ionic bonding and relaxor behavior10.1039/D1TA10971E ↗
42. Configuration-entropy effects on BiFeO 3 –BaTiO 3 relaxor ferroelectric ceramics for high-density energy storage10.1039/D4TA00921E ↗
43. High-efficiency energy storage in Nd-doped (1-x)BiFeO3–xBaTiO3 relaxor ferroelectric ceramics10.1016/j.ceramint.2023.05.197 ↗
44. Improved energy storage in antiferroelectric AgNbO3-modulated 0.925Bi0.5Na0.5TiO3 – 0.075BaTiO3 relaxor ferroelectric ceramics10.1016/j.ceramint.2022.08.148 ↗
45. Large energy storage density in BiFeO3-BaTiO3-AgNbO3 lead-free relaxor ceramics10.1016/j.jeurceramsoc.2020.03.012 ↗
46. Optimizing energy storage under low electric field in A-site dysprosium modified BiFeO3-BaTiO3 ceramics10.1016/j.jallcom.2024.173918 ↗
47. Tailoring energy storage in Nb2O5-added 0.7BiFeO3–0.3BaTiO3 ceramics via A-site Gd3+ substitution10.1016/j.jallcom.2023.171144 ↗