Preparation and PTC properties of multilayer graphene/CB/HDPE conductive composites with different cross-linking systems
Source abstract
Abstract
Multi-layer graphene/carbon black (CB)/high density polyethylene (HDPE) conductive composites with different systems were prepared by melt compounding. The composites were subsequently cross-linked and modified using peroxide cross-linking and radiation cross-linking techniques. The effects of these different cross-linking systems on the room temperature resistivity, positive temperature coefficient (PTC) strength, cyclic stability, and crystallinity of the multi-layer graphene composites were investigated. The results demonstrated that cross-linking modification could increase the room temperature resistivity of the composites. Moreover, as the cross-linking degree increased, the PTC strength also increased, and the negative temperature coefficient (NTC) effect disappeared. Within the range of room temperature resistivity less than 1 Ω cm, the maximum recommended usage of peroxide was 0.3 %. Among the composites with the same ratio, the dual cross-linking system exhibited the best electrical properties. The PTC strength increased by one order of magnitude compared to the un-cross-linked composites, and the cyclic stability was optimal. In the PTC strength test, the result yielded 3.4 in three tests.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene research and applications · Carbon Nanotubes in Composites · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Graphene, a promising transparent conducto10.1016/S1369-7021(10)70034-1 ↗
2. Electric field effect in atomically thin carbon films10.1126/science.1102896 ↗
3. Simulation of crystallization of isotactic polypropylene with different shear regimes10.1016/j.tca.2017.10.023 ↗
4. Synergistic effect of aligned graphene nanosheets in graphene foam for high‐performance thermally conductive composites10.1002/adma.201900199 ↗
5. Graphene‐based transparent conductive films: material systems, preparation and applications10.1002/smtd.201800199 ↗
6. Physical and electromagnetic shielding properties of green carbon foam prepared from biomaterials10.1016/S1003-6326(18)64643-6 ↗
7. An overview of stretchable strain sensors from conductive polymer nanocomposites10.1039/C9TC03655E ↗
8. Graphene-based composite materials10.1038/nature04969 ↗
9. High‐performance pristine graphene/epoxy composites with enhanced mechanical and electrical properties10.1002/mame.201200043 ↗
10. Nanocavities double the toughness of graphene–polycarbonate composite10.1002/adem.201400143 ↗
11. Solution blending preparation of polycarbonate/graphene composite: boosting the mechanical and electrical properties10.1039/C6RA21962D ↗
12. Ber re ttaet al. A primary study into graphene/polyether ether ketone (PEEK) nanocomposite for laser sintering10.1016/j.apsusc.2017.09.226 ↗
13. Effect of carbon-black treatment by radiation emulsion polymerization on temperature dependence of resistivity of carbon-black-filled polymer blends10.1016/j.radphyschem.2005.11.004 ↗
14. An investigation of chemical crosslinking effect on properties of high-density polyethylene10.1016/S0032-3861(03)00363-X ↗
15. Grafting of poly (ethylene-block-ethylene oxide) onto a vapor grown carbon fiber surface by γ-ray radiation grafting10.1016/S0032-3861(03)00274-X ↗
16. Effect of filler treatment and crosslinking on mechanical and dynamic mechanical properties and electrical conductivity of carbon black‐filled ethylene–vinyl acetate copolymer composites10.1002/app.12811 ↗
17. Resistivity‐temperature behavior and morphology of low density polyethylene/graphite powder/graphene composites10.1002/pc.22798 ↗
18. Ram · Appl. Polym. Sci · 1980 · 25 · 151510.1002/app.1980.070250725 ↗
19. Resistivity behavior of filled electrically conductive crosslinked polyethylene10.1002/app.1984.070290518 ↗
20. The stabilization effect of radiation crosslinking on positive temperature coefficient performances of carbon black-polymer composites10.1016/0969-806X(93)90222-G ↗
21. Microstructure changes of extruded ultra high molecular weight polyethylene after gamma irradiation and shelf-aging10.1016/j.polymdegradstab.2004.11.015 ↗
22. Influence of irradiation conditions on the electrical behavior of polyethylene–carbon black conductive composites10.1002/(SICI)1097-4628(20000718)77:3<494::AID-APP4>3.0.CO;2-K ↗
23. LDPE/carbon black conductive composites: influence of radiation crosslinking on PTC and NTC properties10.1002/app.10720 ↗
24. PTC behavior of polymer composites containing ionomers upon electron beam irradiation10.1007/BF03218995 ↗