journal article·2024-02

Comparative study of methods for counting of dislocations in 4H-SiC

Christian Kranert, Paul Wimmer, Alexis Drouin, Christian Reimann, Jochen Friedrich

Publisher page

Abstract

Three experimental techniques to determine the density of the three relevant dislocation types (basal plane, threading edge and threading screw) in SiC were investigated: etching by molten KOH with and without the addition of Na 2 O 2 and X-ray topography. The applicability to implement these techniques for a reliable full-wafer scale analysis is tested experimentally. The limitations are found to be mainly determined by the feature sizes. Based on simple considerations, the range of acceptable sizes of the dislocation-related features is estimated. Etching with Na 2 O 2 allows to distinguish between all three types of dislocations, but a reliable detection is difficult to set up due to a too large spread of etch pit size. Without the addition of Na 2 O 2 , TSD and TED cannot be distinguished, but etch pit sizes become more homogeneous, enabling robust etch pit detection over a wider range of dislocation densities. X-ray topography gives reliable results for TSDs and BPDs whereas the measurement of TEDs is limited.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Silicon carbide power devices
2. Materials science. Silicon carbide as a platform for power electronics10.1126/science.1168704 ↗
3. Electrical characterization of 4H–SiC avalanche photodiodes containing threading edge and screw dislocations10.1063/1.3432663 ↗
4. Effect of dislocations on breakdown in silicon p-n junctions10.1063/1.1723368 ↗
5. Relationship between threading dislocation and leakage current in 4H-SiC diodes10.1063/1.4718527 ↗
6. Breakdown degradation associated with elementary screw dislocations in 4H-SiC p+n junction rectifiers10.1016/S0038-1101(98)00211-1 ↗
7. Degradation of hexagonal silicon-carbide-based bipolar devices10.1063/1.2159578 ↗
8. Mechanism of molten KOH etching of SiC single crystals: Comparative study with thermal oxidation10.1143/JJAP.38.4661 ↗
9. Threading dislocations in n- and p-type 4H–SiC material analyzed by etching and synchrotron X-ray topography10.1016/j.jcrysgro.2010.10.145 ↗
10. Characterization of dislocations and micropipes in 4h n+ SiC substrates10.4028/www.scientific.net/MSF.600-603.333 ↗
11. Correlation between etch pits formed by molten koh+na2o2 etching and dislocation types in heavily doped n+-4H–SiC studied by X-ray topography10.1016/j.jcrysgro.2012.12.011 ↗
12. Molten KOH etching with na2o2 additive for dislocation revelation in 4H-SiC epilayers and substrates
13. Role of the oxidizing agent in the etching of 4H-SiC substrates with molten KOH10.3938/jkps.69.1677 ↗
14. Dislocation characterization in 4H-SiC crystals10.4028/www.scientific.net/MSF.858.393 ↗
15. Tanner · 1976 · vol. 10
16. Authier · 1996 · vol. 357
17. Raghothamachar · 2019
18. Projection x-ray topography system at 1-BM x-ray optics test beamline at the advanced photon source
19. Crystal defects in SiC wafers and a new X-ray topography system
20. Scrutinising SiC with X-ray topography
21. Etching study of dislocations in heavily nitrogen doped SiC crystals10.1016/j.jcrysgro.2009.12.045 ↗