High flexibility and wide sensing range human health monitoring sensors based on Ti3C2Tx MXene/CNTs/WPU/CNFs composite ink film
Source abstract
Abstract
The traditional wearable sensor has the problem of insufficient sensing coefficient and sensing range. In order to solve these problems, this paper innovatively prepared CNTs and MXene monodisperse waterborne slurry mixed with waterborne thermoplastic polyurethane and nanocellulose to prepare composite ink. The monodisperse CNTs and MXene have good conductive network construction ability, so that when the content of CNTs and MXene in the ink is as low as 0.08%, a stable sensing conductive network can still be formed (conductivity 127s/cm). The low addition of nanomaterials are cost saving along with the influence in conductivity which made the experiment to implement the bonding strength and viscous attributes of the inkjet in printing. The mechanical properties of the composite ink film sensor assembled by ink and medical fabric can be carried out by digital spraying printing technology. The results show that the sensitivity of the MXene/CNTs/WPU/CNFs ink sensor in the tensile test is up to 43.61, and the sensor resistance still shows a linear change under the strain of 0–89%. At the same time, after 2100 fatigue tests, the sensor resistance change remains stable. Finally, the MXene/CNTs/WPU/CNFs ink sensor has also been successful in human monitoring. From monitoring small changes such as finger bending and cervical spine bending to monitoring large movements such as arm flexion and knee bending, the corresponding electrical response can be obtained in time respectively. Therefore, the MXene/CNTs/WPU/CNFs ink sensor has the characteristics of high sensitivity, real-time monitoring and recording, which shows that the research has broad application prospects in the future development.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Polydiacetylene-based materials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Longitudinal study of body composition and energy expenditure in overweight or obese young adults[J]10.1038/s41598-020-62249-8 ↗
2. Long-Term evaluation of functional outcomes following rat volumetric muscle loss injury and repair10.1089/ten.tea.2019.0126 ↗
3. Highly sensitive and stretchable MXene/CNTs/TPU composite strain sensor with bilayer conductive structure for human motion detection[J]10.1021/acsami.1c23567 ↗
4. Lifetime health monitoring of fiber reinforced composites using highly flexible and sensitive MXene/CNT film sensor[J]10.1016/j.sna.2021.113148 ↗
5. InterExaminer reliability of radiographic measurements from open-mouth lateral bending cervical radiographs
6. National athletic trainers' association position statement: conservative management and prevention of ankle sprains in athletes10.4085/1062-6050-48.4.02 ↗
7. Contrast-enhanced ultrasound compared with computed tomography, magnetic resonance imaging, and positron emission tomography-computed tomography for diagnosing liver metastases in people with newly diagnosed colorectal cancer[J]
8. Structural health monitoring for polymer composites with surface printed MXene/ink sensitive sensors[J]10.1007/s00339-020-03979-4 ↗
9. Daily writing carbon ink: novel application on humidity sensor with wide detection range, low detection limit and high detection resolution[J]10.1016/j.snb.2021.129884 ↗
10. Fluorimetric quantification of picric acid in aqueous medium via smartphone and invisible ink applications using pyrene based sensor[J]10.1016/j.inoche.2022.109481 ↗
11. Magnetic flexible tactile sensor via direct ink writing[J]10.1016/j.sna.2021.112753 ↗
12. Highly stable Si MOSFET-type humidity sensor with ink-jet printed graphene quantum dots sensing layer[J]10.1016/j.snb.2021.130134 ↗
13. Copper nanowire/polystyrene nanocomposites: lower percolation threshold and higher EMI shielding[J]10.1016/j.compositesa.2010.10.003 ↗
14. Synchronously improved electromagnetic interference shielding and thermal conductivity for epoxy nanocomposites by constructing 3D copper nanowires/thermally annealed graphene aerogel framework[J]10.1016/j.compositesa.2019.105670 ↗
15. One-pot synthesis of conducting graphene–polymer composites and their strain sensing application[J]10.1039/c2nr11555g ↗
16. High-performance strain sensors with fish scale-like graphene sensing layers for full-range detection of human motions[J]10.1021/acsnano.6b03813 ↗
17. Large-area compliant, low-cost, and versatile pressure-sensing platform based on microcrack-designed carbon Black@ polyurethane sponge for human–machine interfacing[J]10.1002/adfm.201601995 ↗
18. A comparison between strain sensing behaviors of carbon black/polypropylene and carbon nanotubes/polypropylene electrically conductive composites[J]10.1016/j.compositesa.2013.01.004 ↗
19. SWCNT/Graphite nanoplatelet hybrid thin films for self-temperature-compensated, highly sensitive, and extensible piezoresistive sensors[J]10.1002/adma.201301796 ↗
20. High conductive and mechanical robust carbon nanotubes/waterborne polyurethane composite films for efficient electromagnetic interference shielding[J]10.1016/j.compositesa.2019.04.003 ↗
21. Superior electromagnetic interference shielding effectiveness and low percolation threshold through the preferential distribution of carbon black in the highly flexible polymer blend composites[J]10.1002/pc.24874 ↗
22. The world of two-dimensional carbides and nitrides (MXenes)[J]
23. Binary strengthening and toughening of MXene/cellulose nanofiber composite paper with nacre-inspired structure and superior electromagnetic interference shielding properties[J]10.1021/acsnano.8b00997 ↗
24. Direct writing of additive-free MXene-in-water ink for electronics and energy storage[J]10.1002/admt.201800256 ↗
25. Ti3C2Tx MXene/carbon nanotubes/waterborne polyurethane based composite ink for electromagnetic interference shielding and sheet heater applications[J]10.1016/j.cej.2021.133171 ↗
26. Flexible Ti3C2Tx MXene/ink human wearable strain sensors with high sensitivity and a wide sensing range[J]10.1016/j.sna.2020.112304 ↗
27. Recent advances in synthesis of waterborne polyurethane and their application in water-based ink: a review[J]10.1016/j.jmst.2015.03.002 ↗
28. Biobased waterborne polyurethanes for coating applications: how fully biobased polyols may improve the coating properties[J]10.1016/j.porgcoat.2016.04.003 ↗
29. MXene nanocomposites: multifunctional nanocomposites with high strength and capacitance using 2D MXene and 1D nanocellulose (Adv. Mater. 41/2019)[J]
30. Effect of coating pigment type on paper printability with water-based inks[J]10.1007/s11998-021-00593-8 ↗
31. Hierarchical macro-microporous WPU-ECM scaffolds combined with microfracture promote in situ articular cartilage regeneration in rabbits[J]
32. Highly sensitive and flexible piezoresistive sensor based on c-MWCNTs decorated TPU electrospun fibrous network for human motion detection[J]10.1016/j.compscitech.2020.108617 ↗
33. Rapid and versatile photonic annealing of graphene inks for flexible printed electronics[J]
34. Inkjet printing of high conductivity, flexible GraphenePatterns[J]10.1021/jz400644c ↗
35. Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors[J]10.1007/s12274-011-0123-z ↗
36. Fabrication and characterization of inkjet-printed carbon nanotube electrode patterns on paper[J]10.1016/j.carbon.2013.02.039 ↗
37. Flexible electroluminescent device with inkjet-printed carbon nanotube electrodes[J]10.1088/0957-4484/23/34/344003 ↗
38. CNT/conducting polymer composite conductors impart high flexibility to textile electroluminescent devices[J]10.1039/C1JM14121J ↗
39. In-plane conduction characterisation and charge transport model of DMSO co-doped, inkjet printed Poly (3, 4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT: PSS)[J]10.1016/j.orgel.2013.09.025 ↗
40. A low-cost, printable, and stretchable strain sensor based on highly conductive elastic composites with tunable sensitivity for human motion monitoring[J]10.1007/s12274-017-1811-0 ↗
41. Printed strain sensor based on silver nanowire/silver flake composite on flexible and stretchable TPU substrate[J]10.1016/j.sna.2018.03.003 ↗
42. Electrically conductivestrain sensing polyurethane nanocomposites with synergistic carbonnanotubes and graphene bifillers10.1039/C6NR02216B ↗
43. Highly stretchable and durable fibrous strain sensor with growth ring-like spiral structure for wearable electronics[J]10.1016/j.compositesb.2021.109275 ↗
44. Strain sensing behaviors of GnPs/epoxy sensor and health monitoring for composite materials under monotonic tensile and cyclic deformation[J]10.1016/j.compscitech.2018.02.017 ↗
45. Huiling Chen, Wearable gas/strain sensors based onreduced graphene oxide/linen fabrics, Front
46. Pre-fatigue enhancing both long-term stability and sensitivity of direct-ink-writing printed sensors[J]10.1016/j.ijfatigue.2022.107237 ↗
47. Stretchable, highly durable ternary nanocomposite strain sensor for structural health monitoring of flexible aircraft[J]