journal article·2018-03

Influence of 100 keV Ar+ implantation on electrical and optical properties of TiO2/Ag/TiO2 multilayer films

Satyavir Singh, Vikas Sharma, Dinesh Saini, Surbhi Shekhawat, K. Asokan, Kanupriya Sachdev

Publisher page

Abstract

Abstract The objective of this study was to investigate the effect of 100 keV Ar+ ion implantation with fluence ranging from 1 × 1014 to 1 × 1016 ions/cm2 on structural, electrical and optical properties of TiO2/Ag/TiO2 films. The TiO2/Ag/TiO2 multilayer films with a total thickness of 100 nm were prepared by sputtering at room temperature on glass and silicon substrates. The structural properties studied via X-ray diffraction showed amorphous nature of TiO2 and a peak centred at 38.15° assigned to Ag (111) diffraction plane. Morphological analysis carried by field emission scanning electron microscopy and atomic force microscopy exhibit uniform deposition of films. A decrease in surface roughness was observed from 1.71 to 0.87 nm with increase in ion fluence from 0 to 1 × 1016 ions/cm2. Measured resistivity of the pristine film was 2.04 × 10−4 Ω cm, which minimized to 9.14 × 10−5 Ω cm at the highest fluence of 1 × 1016 ions/cm2. The transmittance decreases from 80% to 73% for higher fluences. Changes in electrical resistivity and transmittance can be attributed to the structural changes in the samples due to amorphization, defect creation and doping on ion implantation. Carrier concentration, mobility of charge carriers and sheet resistance for pristine and implanted films have been calculated as a function of ion fluence. X-ray photoelectron spectroscopy data revealed creation of Ti ions (Ti3+) after Ar+ ion implantation. The core level spectrum of O 1s was also studied and presence of some OH species is found on the surface. Optical and transport properties of implanted TAT films are comparable to that of indium tin oxide (ITO) and make them a good choice for the current and future transparent conducting electrode (TCE) applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Properties of TiO2-based transparent conducting oxides10.1002/pssa.200983774 ↗
2. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
3. Transparent conducting oxides−an up-to-date overview10.3390/ma5040661 ↗
4. Transparent conductors-a status review10.1016/0040-6090(83)90256-0 ↗
5. Direct growth of transparent conducting Nb-doped anatase TiO2 polycrystalline films on glass10.1063/1.3148267 ↗
6. Performance improvement of dye-sensitized solar cells by surface patterning of fluorine-doped tin oxide transparent electrodes10.1016/j.tsf.2011.01.251 ↗
7. Growth of transparent conducting nanocrystalline Al doped ZnO thin films by pulsed laser deposition10.1016/j.jcrysgro.2006.06.035 ↗
8. Highly flexible ZnO/Ag/ZnO conducting electrode for organic photonic devices10.1016/j.ceramint.2015.02.031 ↗
9. A study on 100MeV O7+ irradiated SnO2/Ag/SnO2 multilayer as transparent electrode for flat panel display application10.1016/j.nimb.2016.04.059 ↗
10. Probing the highly transparent and conducting SnOx/Au/SnOx structure for futuristic TCO10.1039/C5RA24422F ↗
11. Performance improvement of TiO2/Ag/TiO2 multilayer transparent conducting electrode films for application on photodetectors10.1088/0022-3727/49/11/115108 ↗
12. Dependence of optical and electrical properties on Ag thickness in TiO2/Ag/TiO2 multilayer films for photovoltaic devices10.1016/j.ceramint.2015.03.002 ↗
13. J.H. Jia, P. Zhou, H. Xie, H.Y. You, J. Li, L.Y. Chen, Study of Optical and Electrical Properties of TiO2/Ag/TiO2 Multilayers, vol. 44, 2004, pp. 717–721.10.3938/jkps.44.717 ↗
14. Realization of highly transparent and low resistance TiO2/Ag/TiO2 conducting electrode for optoelectronic devices10.1016/j.ceramint.2014.10.148 ↗
15. Swift heavy ions for materials engineering and nanostructuring
16. Tailoring of optical and gas sensitivity behaviors of WO3 films by low energy Ar+ ion implantation10.1016/j.tsf.2012.10.101 ↗
17. H. Thakur, S. Gautam, P. Thakur, K.K. Sharma, A.P. Singh, Y. Kumar, R. Kumar, K.H. Chae, On the optical properties of Ag+15 ion-beam irradiated TiO2 and SnO2 thin films, 2011. 〈http://doi.org/10.3938/jkps.61.1609〉.10.3938/jkps.61.1609 ↗
18. Fabrication of highly efficient TiO2/Ag/TiO2 multilayer transparent conducting electrode with N ion implantation for optoelectronic applications10.1016/j.ceramint.2017.04.152 ↗
19. High-performance radiation stable ZnO/Ag/ZnO multilayer transparent conductive electrode10.1016/j.solmat.2017.05.009 ↗
20. Lattice location and electrical conductivity in ion implanted TiO, single crystals
21. Ultraflexible polymer solar cells using amorphous zinc-indium-tin oxide transparent electrodes10.1002/adma.201302303 ↗
22. Sequential ion-induced stress relaxation and growth: a way to prepare stress-relieved thick films of cubic boron nitride10.1063/1.125869 ↗
23. MeV ion irradiation induced evolution of morphological, structural and optical properties of nanostructured SnO2 thin films10.1088/2053-1591/2/4/045013 ↗
24. Stress development during thin film growth and its modification under ion irradiation
25. Influence of SHI irradiation on the structure and surface topography of CdTe thin films on flexible substrate
26. High quality transparent TiO2/Ag/TiO2 composite electrode films deposited on flexible substrate at room temperature by sputtering10.1063/1.4808438 ↗
27. Formation of TiO2 nanoparticles by reactive-layer-assisted deposition and characterization by XPS and STM10.1021/nl0505703 ↗
28. Electronic structure of anatase TiO2 oxide10.1063/1.356190 ↗
29. Encapsulation of Rh nanoparticles supported on TiO2(110)-(1 × 1) surface: XPS and STM studies10.1021/jp973255g ↗
30. Alteration of Ti 2p XPS spectrum for titanium oxide by low-energy Ar ion bombardment10.1002/sia.1296 ↗
31. Synthesis, characterization, electronic structure, and photocatalytic activity of nitrogen-doped TiO2 nanocatalyst10.1021/cm052047v ↗
32. XPS and UPS Characterization of the TiO2/ZnPcGly Heterointerface: alignment of Energy Levels10.1021/jp014192b ↗
33. Switched photocurrent direction in Au/TiO2 bilayer thin films10.1038/srep10852 ↗
34. Fe3+:Ag/TiO2 nanocomposite: synthesis, characterization and photocatalytic activity under UV and visible light irradiation10.1016/j.apcata.2014.01.005 ↗
35. Oxygen sensing performance of Nb-doped TiO2 thin film with porous structure10.1016/j.jallcom.2013.09.161 ↗
36. The effect of ion source working power on the composition and optical properties of TiO2 films bombarded by N ion beam10.1016/j.surfcoat.2013.01.009 ↗
37. Optical properties of amorphous semiconductors, amorphous and liquid
38. Studies on the structural, electrical and optical properties of Al-doped ZnO thin films prepared by chemical spray deposition10.1016/j.ceramint.2005.03.029 ↗
39. XRD and XPS characterization of superplastic TiO2 coatings prepared on Ti6Al4V surgical alloy by an electrochemical method
40. Carrier generation in highly oriented WO3 films by proton or helium implantation10.1063/1.1496120 ↗
41. Large electrical conductivity enhancement of WO3 thin films produced by ion implantation10.1063/1.368608 ↗
42. Ion implantation in TiO2: damage production and recovery, lattice site location and electrical conductivity10.1016/S0168-583X(98)00551-5 ↗
43. Growth, morphology, and optical and electrical properties of semicontinuous metallic films10.1103/PhysRevB.67.035318 ↗
44. New figure of merit for transparent conductors*10.1063/1.323240 ↗