The effects of α-sodium alkenesulfonate and alkylphenol polyoxyethylene ether phosphate on the inhibition of copper chemical mechanical polishing
Source abstract
Abstract
In this work, α-sodium alkene sulfonate (α-AOS) and alkylphenol polyoxyethylene ether phosphate (APE-10P) were tested as environmentally friendly inhibitors in slurries to replace toxic benzotriazole. α-AOS and APE-10P can improve slurry dispersion, increase the inhibition efficiency to 79.6 % and polishing rate reduced to 8414 Å/min; Reduced corrosion and surface roughness decreased from 3.10 nm to 1.41 nm; By measuring the particle size of polishing solution, it has been proven that the addition of two active agents effectively improves the dispersion of the solution, reduces the distance between silica sol colloids, and reduces the particle size of silica sol from 71.5 nm to 68.5 nm; To verify the stability of the polishing solution, the Zeta potential of the polishing solution on the first day was −40.99 mV, and on the seventh day it was −36.6 mV, which can meet the stability requirements for at least seven days and meet industrial requirements. Calculation proves that APE-10P and α-AOS can spontaneously adsorb on Cu surfaces. This work focuses on the mechanism of inhibition in Cu CMP, which provides some inspirations for the development of environmentally friendly slurries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Metal Extraction and Bioleaching · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A study on exploring the alkaline copper CMP slurry without inhibitors to achieve high planarization efficiency10.1016/j.mee.2016.02.044 ↗
2. Dishing-free chemical mechanical planarization for copper films
3. Chemical–mechanical polishing behavior of tantalum in slurries containing citric acid and alumina10.1016/j.surfcoat.2003.12.025 ↗
4. Corrosion control of copper wiring by barrier CMP slurry containing azole inhibitor: combination of simulation and experiment10.1016/j.colsurfa.2020.124872 ↗
5. Investigation of cu-BTA complex formation during Cu chemical mechanical planarization process10.1016/j.apsusc.2016.05.106 ↗
6. A review on recent developments in the adsorption of surfactants from wastewater10.1016/j.jenvman.2019.109797 ↗
7. Degradation of inhibitor in alkaline cleaning solution for post-Cu CMP cleaning10.1016/j.surfcoat.2018.02.039 ↗
8. A review: green chemical mechanical polishing for metals and brittle wafers10.1088/1361-6463/ac0c4a ↗
9. Roles and mechanism analysis of chitosan as a green additive in low-tech node copper film chemical mechanical polishing10.1016/j.colsurfa.2019.124293 ↗
10. Effect of non-ionic surfactant on chemical mechanical planarization performance in alkaline copper slurry10.1007/s12541-018-0186-9 ↗
11. Synergy between dodecylbenzenesulfonic acid and isomeric alcohol polyoxyethylene ether for nano-scale scratch reduction in copper chemical mechanical polishing10.1016/j.triboint.2020.106576 ↗
12. Environment friendly chemical mechanical polishing of copper10.1016/j.apsusc.2018.10.133 ↗
13. Chemical mechanical planarization (CMP) of on-axis Si-face SiC wafer using catalyst nanoparticles in slurry10.1016/j.surfcoat.2014.03.044 ↗
14. Lubrication characteristics and wear mechanism mapping for hybrid aluminium metal matrix composite sliding under surfactant functionalized MWCNT-oil10.1016/j.triboint.2019.106152 ↗
15. Role of interaction forces in controlling the stability and polishing performance of CMP slurries10.1016/S0021-9797(03)00201-7 ↗
16. Effects of chemical mechanical planarization slurry additives on the agglomeration of alumina nanoparticles II: aggregation rate analysis10.1016/j.jcis.2013.12.040 ↗
17. Innovative insight for sodium hexametaphosphate on the dispersion of micro-sized lanthanum-cerium-based slurry10.1016/j.colsurfa.2023.131444 ↗
18. Kinetics of wetting and spreading by aqueous surfactant solutions10.1016/j.cis.2008.08.005 ↗
19. Molecular insights into the effect of anionic-nonionic and cationic surfactant mixtures on interfacial properties of oil-water interface10.1016/j.colsurfa.2022.128259 ↗
20. Dynamic contact angle and spreading rate measurements for the characterization of the effect of dentin surface treatments10.1016/S0021-9797(03)00114-0 ↗
21. Insight into the lubricating mechanism for alkylimidazolium phosphate ionic liquids with different alkyl chain length10.1016/j.triboint.2019.105886 ↗
22. Industrial manufactured silica nanoparticle sols. 2: surface tension, particle concentration, foam generation and stability10.1016/j.colsurfa.2008.12.009 ↗
23. Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants10.1016/j.triboint.2018.10.025 ↗
24. Surface tension at the interface between aqueous solution of surfactant and alkane. A comprehensive quantum chemical and thermodynamic approach10.1016/j.colsurfa.2020.124557 ↗
25. Effects of surfactants and polyelectrolytes on the interaction between a negatively charged surface and a hydrophobic polymer surface10.1021/acs.langmuir.5b01781 ↗
26. Investigation of electrochemical behavior and polishing mechanism in electrochemical mechanical polishing of cobalt10.1016/j.mssp.2023.107899 ↗
27. Studies of iron corrosion inhibition using chemical, electrochemical and computer simulation techniques10.1016/j.electacta.2010.06.027 ↗
28. Eis and XPS study of surface modification of 316LVM stainless steel after passivation10.1016/S0010-938X(98)00122-X ↗
29. Reducing the resistance for the use of electrochemical impedance spectroscopy analysis in materials chemistry10.1039/D1RA03785D ↗
30. Reduced HOMO−LUMO gap as an index of kinetic stability for polycyclic aromatic hydrocarbons10.1021/jp990092i ↗
31. Self-assembly and intermolecular forces when cellulose and water interact using molecular modeling
32. Theoretical determination of a reaction intermediate: Fukui function analysis, dual reactivity descriptor and activation energy10.1016/j.molstruc.2020.129369 ↗
33. Electron density, Kohn–Sham frontier orbitals, and Fukui functions10.1063/1.447964 ↗
34. DFT, Fukui indices, and molecular dynamic simulation studies on corrosion inhibition characteristics: a review10.1007/s11696-023-03148-w ↗
35. Molecular dynamics simulation and DFT calculation of “green” scale and corrosion inhibitor10.1016/j.commatsci.2020.110229 ↗
36. DFT study on the adsorption of deprotonated benzotriazole on the defective copper surfaces10.1016/j.corsci.2021.109458 ↗
37. Adsorption of Pd on the Cu(1 1 1) surface and its catalysis of methane partial oxidation: a density functional theory study10.1016/j.apsusc.2020.145724 ↗
38. Molecular dynamics study on the spontaneous adsorption of aromatic carboxylic acids to methane hydrate surfaces: implications for hydrate antiagglomeration10.1021/acs.energyfuels.2c00347 ↗
39. Effect of anions on the anodic dissolution behavior of iron: an electrochemical and density functional theory study10.1016/j.corsci.2024.111852 ↗
40. Intermolecular forces10.1098/rstb.1975.0066 ↗