Sintering and optimization of copper nanopaste-connected copper array conical microstructures
Source abstract
Abstract
With the advancement of 3D integration technology, the integration density and operational speed of circuits continue to increase. Consequently, there is a corresponding rise in the demand for interconnection reliability. However, traditional interconnection processes and materials are no longer able to meet the requirements for interconnection reliability. This study optimized the interconnection material by utilizing different ratios of organic compounds in nano-copper coating materials. Micro/nanostructures were processed using femtosecond laser and secondary thermal coating to enhance the interconnection process. Firstly, to ensure processing efficiency, we utilized femtosecond laser to create micro/nanostructures with increased surface contact area. Subsequently, varying molar ratios of ascorbic acid and benzimidazole were utilized in the preparation of copper (Cu) pastes to analyze their impact on the dispersion and sphericity of the copper nanoparticles and the shear strength of the interconnections. The ideal combination resulted in well-dispersed spherical copper nanoparticles, copper nano paste with an average shear strength of about 38 MPa was obtained. In addition, optimization was achieved through the femtosecond laser copper interconnection sintering process using a secondary heat coating, which reduced the unfilled rate of surface microstructures from 35.31 % to 11.25 % and increased the copper interconnection strength from 31.42 MPa to 43.65 MPa. Finally, finite element simulation analysis was employed to study the temperature and stress distribution of the copper interconnect during operation and to predict its service life under thermal cycling conditions (−50 °C–300 °C). The results demonstrated that the reliability of the sintered structure meets operational requirements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Atomic level deposition to extend Moore's law and beyond10.1088/2631-7990/ab83e0 ↗
2. Multilevel ferroelectric domain wall memory for neuromorphic computing
3. Rapid sintering by thermo-compression in air using a paste containing bimodal-sized silver-coated copper particles and effects of particle size and surface finish type10.1016/j.jallcom.2021.163223 ↗
4. Atomic fast dynamic motion on the Cu nanoparticle's surface before melting: a molecular dynamics study10.1016/j.apsusc.2022.154901 ↗
5. Microstructure evolution during 300 °C storage of sintered Ag nanoparticles on Ag and Au substrates10.1016/j.jallcom.2014.08.062 ↗
6. Novel interface material used in high power electronic die-attaching on bare Cu substrates10.1007/s10854-016-5208-8 ↗
7. Enhanced heat dissipation of high-power light-emitting diodes by Cu nanoparticle paste10.1109/LED.2019.2912458 ↗
8. Mechanical properties of nano-silver joints as die attach materials10.1016/j.jallcom.2011.10.092 ↗
9. Identifying the development state of sintered silver (Ag) as a bonding material in the microelectronic packaging via a patent landscape study10.1115/1.4033069 ↗
10. Densification and grain growth during sintering of nanosized particles10.1179/174328008X353538 ↗
11. Green synthesis of novel in situ micro/submicron-Cu paste for semiconductor interconnection10.1088/1361-6528/ac4b79 ↗
12. Thermal-stable void-free interface morphology and bonding mechanism of low-temperature Cu-Cu bonding using Ag nanostructure as intermediate10.1016/j.jallcom.2018.07.060 ↗
13. Conductivity enhancement of nano silver-filled conductive adhesives by particle surface functionalization10.1007/s11664-005-0202-6 ↗
14. Die bonding performance using bimodal Cu particle paste under different sintering atmospheres10.1007/s11664-017-5464-2 ↗
15. Improved sinter-bonding properties of silver-coated copper flake paste in air by the addition of sub-micrometer silver-coated copper particles10.1016/j.jmrt.2020.11.069 ↗
16. Dewetting behavior of Ag in Ag-coated Cu particle with thick Ag shell10.1016/j.apsusc.2019.02.221 ↗
17. One-step fabrication of 3D nanohierarchical nickel nanomace array to sinter with silver NPs and the interfacial analysis10.1021/acsami.6b13031 ↗
18. Bonding strength enhancement of low temperature sintered SiC power module by femtosecond laser induced micro/nanostructures10.1016/j.mssp.2022.106802 ↗
19. Optimization and simulation of nano-silver paste sintered copper interconnection process10.1007/s10854-022-09161-1 ↗
20. Low-temperature copper bonding strategy via hierarchical microscale taper array fabricated by femtosecond laser10.1088/1612-202X/ab6f74 ↗
21. An ultrasensitive flexible force sensor with nature-inspired minimalistic architecture to achieve a detection resolution and threshold of 1 mN for underwater applications10.1016/j.mser.2024.100862 ↗
22. Thermo-electro-mechanical modeling, simulation and experiments of field-assisted sintering10.1007/s10853-019-03653-y ↗
23. Applying Anand model to low-temperature sintered nanoscale silver paste chip attachment10.1016/j.matdes.2009.04.006 ↗
24. Influencing factors of fatigue life of nano-silver paste in chip interconnection10.1007/s11664-020-08501-3 ↗
25. Stability of Cu-islands formed on Si substrate via 'dewetting' under subsequent thermal cycling10.1088/1361-6528/abe0e7 ↗
26. High temperature viscoplastic deformation behavior of sintered nanocopper paste used in power electronics packaging: insights from constitutive and multi-scale modelling10.1016/j.jmrt.2023.08.086 ↗
27. Bonding strength enhancement by Ag–Zn–Cu intermetallic compounds and microscale tapers array fabricated by femtosecond laser10.1007/s10854-021-06473-6 ↗
28. Fatigue life of leadless chip carrier solder joints during power cycling10.1109/TCHMT.1983.1136183 ↗
29. Reliability assessment of sintered nano-silver die attachment for power semiconductors
30. High efficiency femtosecond laser ablation of alumina ceramics under the filament induced plasma shock wave10.1016/j.ceramint.2024.09.098 ↗
31. Micro-welding of non-optical contact sapphire/metal using Burst femtosecond laser[J]10.1016/j.matlet.2024.137540 ↗
32. Damage performance of alumina ceramic by femtosecond laser induced air filamentation10.1016/j.optlastec.2024.111781 ↗