journal article·2024-06

Electroless deposition of high-uniformity nickel microbumps with ultrahigh resolution of 8 μm pitch for monolithic Micro-LED display

Yu Lu, Chang Lin, Liang Tian, Shuaishuai Wang, Kaixin Zhang, Taifu Lang, Yang Li, Qiwei Li, Tianxi Yang, Zhonghang Huang, Jie Sun, Qun Yan

Publisher page

Abstract

Micro-light-emitting diode (Micro-LED) displays have attracted growing attention due to their unsurpassed properties that satisfy the requirements of reality/virtual reality (AR/VR) displays. A crucial procedure of monolithic integration technology in high-density microdisplays is the interconnection process, which is intimately associated with the quality of the display device. Microfluidic electroless interconnection (MELI), an innovative low-temperature and pressure-free chip-stacking approach that eliminates the warpage-induced issues and cracking damage of the chip caused by thermo-compression bonding (TCB), holds great promise as a technology for establishing interconnections between the CMOS driver and Micro-LED. However, the requirement for the consistency of the microbump arrays and the risk of creating bridges is significantly intensified with smaller gaps in stacked chips, which restricts the application range of MELI to high-density interconnects. This paper analyzes the feasibility of further lowering the stand-off height of stacked chips in ultrafine pitch interconnects by optimizing the bump preparation process. The plasma modification time and surfactant concentration during the bump preparation process have been investigated. The result indicated that microbump arrays with a uniformity of less than 3% could be successfully manufactured by employing a 7-min plasma treatment and incorporating optimal surfactants, which catalyzes the implementation of the subsequent vertical interconnection process and eventually enhances yields of Micro-LEDs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Nanomaterials and Printing Technologies · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Fabrication and Characterization of Active-Matrix 960 x 540 Blue GaN-Based Micro-LED Display10.1109/JQE.2019.2900540 ↗
2. Characteristics and techniques of GaN-based micro-LEDs for application in next-generation display10.1088/1674-4926/41/4/041606 ↗
3. Towards 10 Gb/s orthogonal frequency division multiplexing-based visible light communication using a GaN violet micro-LED10.1364/PRJ.5.000A35 ↗
4. 9.4-inch 228-ppi flexible micro-LED display10.1002/jsid.1022 ↗
5. Oxide-Oxide Thermocompression Direct Bonding Technologies with Capillary Self-Assembly for Multichip-to-Wafer Heterogeneous 3D System Integration10.3390/mi7100184 ↗
6. Thermosonic direct Cu pillar bonding for 3D die stacking, Sn Applied
7. Low-temperature silicon wafer-scale thermocompression bonding using electroplated gold layers in hermetic packaging10.1149/1.2077077 ↗
8. Sea of leads compliant I/O interconnect process integration for the ultimate enabling of chips with low-k interlayer dielectrics10.1109/TADVP.2005.848386 ↗
9. Microfluidic electroless deposition for uniform stacking chip interconnection: simulation framework and experimental validation10.1016/j.cej.2022.134684 ↗
10. Highly uniform microfluidic electroless interconnections for chip stacking applications
11. Copper electroless bonding of dome-shaped pillars for chip-to-package interconnect10.1149/2.066112jes ↗
12. Electroless copper deposition with PEG suppression for all-copper flip-chip connections10.1149/1.3123288 ↗
13. Low-Temperature, Pressureless Cu-to-Cu Bonding By Electroless Ni Plating, 11th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT-IAAC), Taipei
14. High coplanarity and fine pitch copper pillar bumps fabrication method
15. Height Uniformity Simulation and Experimental Study of Electroplating Gold Bump for 2.5D/3D Integrated Packaging10.3390/mi13091537 ↗
16. Electrodeposition of indium bumps for ultrafine pitch interconnection10.1007/s11664-013-2891-6 ↗
17. Indium bump process for low-temperature detectors and readout10.1007/s10909-022-02728-6 ↗
18. Indium Bump Process for Low-Temperature Detectors and Readout10.1007/s10909-022-02728-6 ↗
19. Height Uniformity Simulation and Experimental Study of Electroplating Gold Bump for 2.5D/3D Integrated Packaging10.3390/mi13091537 ↗
20. Electroless Deposition of 4 μm High Ni/Au Bumps for 8 μm Pitch Interconnection10.1021/acsaelm.2c00974 ↗
21. Application of precision filtration to an electroless copper plating bath, Plating and Surface
22. Photoresist Removal Using Reactive Oxygen Species Produced by an Atmospheric Pressure Plasma Reactor10.1149/2162-8777/ac62ef ↗
23. Structure and reactivity of water at biomaterial surfaces10.1016/S0001-8686(97)00040-7 ↗
24. Surface properties of glass plates activated by air, oxygen, nitrogen and argon plasma10.1134/S1087659616060195 ↗
25. Efficacy of reducing agent and surfactant contacting pattern on the performance characteristics of nickel electroless plating baths coupled with and without ultrasound10.1016/j.ultsonch.2014.01.015 ↗
26. Effects of surfactants in an electroless nickel-plating bath on the properties of Ni-P alloy deposits10.1021/ie0105831 ↗