Composite surfactant based on AEO and ADS for colloidal silica particles removal in post CMP cleaning of copper interconnection
Source abstract
Abstract
The removal of contamination on wafer surface is an urgent problem to be solved after CMP, while the removal of colloidal silica particles is a key problem in post CMP cleaning. The optimized cleaning solution consisting of 150 ppm FA/OII, 1500 ppm AEO-15 and 1000 ppm ADS can effectively remove the residual particles. In addition, AFM, SEM and other measurements are used to confirm that the cleaning solution can also improve the surface quality. The results show that AEO-15 can preferentially adsorb on the wafer surface, weaken the adsorption of particles through penetration and lifting. It can also hinder the agglomeration of particles, strengthen the cleaning effect and reduce the surface roughness. ADS can be mixed and adsorb with AEO-15, which increases the coverage area of colloidal silica particles on the surface. The difficulty of agglomeration and collision between colloidal silica particles can also be increased. The synergistic effect of composite surfactant and FA/OII chelating agent can effectively reduce the number of residual particles and improve the surface quality.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Challenges and solutions for post-CMP cleaning at device and interconnect levels[M]10.1016/B978-0-12-821791-7.00010-1 ↗
2. Development of a novel wet cleaning solution for Post-CMP SiO2 and Si3N4 films10.1016/j.mssp.2021.106353 ↗
3. Abrasive and additive interactions in high selectivity STI CMP slurries10.1016/j.mee.2013.10.004 ↗
4. Core–shell structured polystyrene coated silica composite abrasives with homogeneous shells: the effects of polishing pressure and particle size on oxide-CMP10.1016/j.precisioneng.2015.06.011 ↗
5. Preparation of La-doped colloidal SiO2 composite abrasives and their chemical mechanical polishing behavior on sapphire substrates10.1016/j.precisioneng.2015.10.009 ↗
6. Effect of diluted colloidal silica slurry mixed with ceria abrasives on CMP characteristic10.1007/s40684-016-0002-x ↗
7. Interaction between abrasive particles and films during chemical-mechanical polishing of copper and tantalum10.1016/j.tsf.2005.09.189 ↗
8. Novel post cleaning solutions for next generation Cu CMP application10.1149/1.3360684 ↗
9. Investigation of the barrier slurry with better defect performance and facilitating post-CMP cleaning10.1016/j.mee.2016.12.002 ↗
10. Investigation of cleaning solution composed of citric acid and 5-aminotetrazole10.1007/s11814-011-0023-7 ↗
11. The effect of additives in post-Cu CMP cleaning on particle adhesion and removal10.1149/1.1802493 ↗
12. Comparison of novel cleaning solutions with various chelating agents for post-CMP cleaning on poly-Si film10.1109/66.964323 ↗
13. Park · 2007 · 1
14. Characterization of TMAH based cleaning solution for post Cu-CMP application10.1016/j.mee.2012.04.006 ↗
15. Characterization of non-amine-based post-copper chemical mechanical planarization cleaning solution10.1016/j.mee.2014.02.034 ↗
16. Addition of surfactants in ozonated water cleaning for the suppression of functional group formation and particle adhesion on the SiO2 surface10.1016/j.apsusc.2010.11.004 ↗
17. Effect of a novel chelating agent on defect removal during post-CMP cleaning10.1016/j.apsusc.2016.03.230 ↗
18. The effect of citric acid based cleaning solution on particle adhesion and removal during post-Cu CMP cleaning10.1016/j.mee.2019.111090 ↗
19. Role of penetrating agent on colloidal silica particle removal during post Cu CMP cleaning10.1149/2.0111808jss ↗
20. Hybrid cleaning Technology for enhanced post-Cu/Low-Dielectric constant chemical mechanical planarization cleaning performance10.7567/JJAP.52.05FC02 ↗
21. Effect of chelating agent and ammonium dodecyl sulfate on the interfacial behavior of copper CMP for GLSI10.1149/2.0231809jss ↗
22. Synergetic effect of benzotriazole and non-ionic surfactant on copper chemical mechanical polishing in KIO4- based slurries10.1016/j.tsf.2014.01.086 ↗
23. Synergistic roles of dodecyl sulfate and benzotriazole in enhancing the efficiency of CMP of copper10.1149/1.2717410 ↗
24. Effect of surfactant on package substrate in chemical mechanical planarization10.1007/s40684-015-0008-9 ↗
25. Study on the weakly alkaline slurry of copper chemical mechanical planarization for GLSI10.1149/2.0071708jss ↗
26. The effect of frictional and adhesion forces attributed to slurry particles on the surface quality of polished copper10.1149/1.2393051 ↗
27. Synergistic effect of LABSA/JFCE combined surfactant system on the removal of particles on copper wafer surface10.1016/j.matchemphys.2020.123841 ↗
28. Adsorption of nonionic surfactant on silica nanoparticles: structure and resultant interparticle interactions10.1021/jp1033799 ↗
29. Aqueous foam stabilized by hydrophobic SiO2 nanoparticles using mixed anionic surfactant systems under high-salinity brine condition10.1002/jsde.12320 ↗
30. A comparison of log Kow (n-octanol–water partition coefficient) values for non-ionic, anionic, cationic and amphoteric surfactants determined using predictions and experimental methods10.1186/s12302-018-0176-7 ↗
31. Silicon nitride—from powder synthesis to ceramic materials10.1002/anie.199115791 ↗
32. The critical micelle concentration of soap mixtures (two-component mixture)10.1021/j150517a007 ↗
33. Effects of solution chemistry on the partitioning of phenanthrene to sorbed surfactants10.1021/es9804565 ↗
34. Adsorption of nonionic surfactant on silica nanoparticles: structure and resultant interparticle interactions10.1021/jp1033799 ↗
35. Particle adhesion and removal mechanisms in post-CMP cleaning processes10.1109/TSM.2002.804872 ↗
36. Adhesion of colloidal SiO2 particles on ZnS-type phosphor surfaces10.1006/jcis.2000.6915 ↗
37. Electrochemical–mechanical planarization of copper: effects of chemical additives on voltage controlled removal of surface layers in electrolytes10.1016/j.matchemphys.2005.05.020 ↗
38. Study on the cleaning of silicon after CMP in ULSI10.1016/S0167-9317(02)00906-1 ↗