journal article·2024-10

Effect of laser-assisted heat treatment on material removal behavior of sapphire in indentation and scratching

Shu Yang, Bin Wang, Ruyuan Zeng, Zhenyu Liu, Yingxi Xie, Longsheng Lu

Publisher page

Abstract

Sapphire is widely used in aerospace, microelectronics and defense applications. Due to its high hardness and low fracture toughness, it is difficult to achieve high efficiency and low damage machining. Laser-assisted machining is an effective method for machining hard and brittle materials and has been explored in many experimental and theoretical studies. In this paper, the mechanical property of sapphire and the variation of the coefficient of friction assisted by different laser powers are investigated in detail. Meanwhile, Raman spectroscopy was employed to reveal the residual stress characteristics in the deformation zone of the scratch grooves, and to analyse the changes in the depth of plastic-brittle transition of sapphire after heat treatment with different laser powers. Comparing the material removal behavior of sapphire in indentation and scratching experiments with and without laser-assisted heat treatment (LAHT), and exploring their material removal mechanisms. Experimental results show that LAHT can improve the ductility and workability of sapphire by reducing the hardness and improving the fracture behavior of the material. Hardness and elasticity modulus decrease with increasing power, and the distribution of residual stress changes from compressive to tensile with increasing power. Laser treated surface was found to possess shorter crack length, no significant localized chipping and spalling in indentation, and its scratch grooves were deeper with no radial cracks observed, the scratching force ratio was higher, the critical load for brittle-plastic transition became larger, and plastic flow lines and lumpy spalling debris appeared in the scratch areas. Nearly zero cracks were observed in material subsurface under the LAHT. With LAHT, the material is removed at a higher rate and in a more plastic way, fracture behavior of the material is improved, surface and subsurface damage is reduced, and the machining efficiency is enhanced. This study has important implications and benefits for the machining of sapphire in ensuring surface quality and achieving high efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. HEL quality polishing of large sapphire substrates
2. Grinding forces in micro slot-grinding (MSG) of single crystal sapphire10.1016/j.ijmachtools.2016.10.004 ↗
3. Sapphire hardness in different crystallographic directions, bulletin of the Russian academy of sciences
4. Material removal and subsurface damage studies in dry and lubricated single-point scratch tests on alumina and silicon nitride10.1016/S0043-1648(99)00048-4 ↗
5. Investigation on residual scratch depth and material removal rate of scratching machining single crystal silicon with Berkovich indenter10.1016/j.mssp.2019.04.037 ↗
6. Influences of processing parameters on metal-bonded diamond wheel wear when grinding a sapphire wafer10.1016/j.diamond.2021.108275 ↗
7. Single diamond grit scratching of unidirectional Cf/SiCcomposite: mechanical responses and fracture mechanism
8. Single diamond scribing of SiCf/SiC composite: force and material removal mechanism study10.1016/j.ceramint.2021.06.195 ↗
9. Advances in laser assisted machining of hard and brittle materials10.1016/j.jmapro.2020.08.034 ↗
10. Effect of ultrasonic elliptical vibration assistance on the surface layer defect of M-plane sapphire in microcutting10.1016/j.matdes.2020.108755 ↗
11. Study on high efficient sapphire wafer processing by coupling SG-mechanical polishing and GLA-CMP10.1016/j.ijmachtools.2018.03.002 ↗
12. Surface generation of tungsten carbide in laser-assisted diamond turning10.1016/j.ijmachtools.2021.103770 ↗
13. Enhancing the ductile machinability of single-crystal silicon by laser-assisted diamond cutting10.1007/s00170-021-08132-w ↗
14. Study on the three-dimensional topography of the machined surface in laser-assisted machining of Si3N4ceramics under different material removal modes10.1016/j.ceramint.2019.11.017 ↗
15. Material removal mechanism of laser-assisted grinding of RB-SiC ceramics and process optimization10.1016/j.jeurceramsoc.2018.11.002 ↗
16. Laser-assisted grinding of silicon nitride ceramics: micro-groove preparation and removal mechanism10.1016/j.ceramint.2022.07.180 ↗
17. A grinding force predictive model and experimental validation for the laser-assisted grinding (LAG) process of zirconia ceramic10.1016/j.jmatprotec.2022.117492 ↗
18. Effects of laser-assisted grinding on surface integrity of zirconia ceramic10.1016/j.ceramint.2019.09.051 ↗
19. Experimental investigation of grinding force and material removal mechanism of laser-structured zirconia ceramics10.3390/mi13050710 ↗
20. Surface formation in laser-assisted grinding high-strength alloys10.1016/j.ijmachtools.2023.104002 ↗
21. Experimental investigation and numerical analysis for machinability of alumina ceramic by laser-assisted grinding10.1016/j.precisioneng.2021.08.002 ↗
22. Mitigation of damage during surface finishing of sapphire using laser-assisted machining10.1016/j.precisioneng.2018.08.012 ↗
23. Laser machining sapphire via Si-sapphire interface absorption and process optimization using an integrated approach of the Taguchi method with grey relational analysis10.1016/j.jmrt.2023.02.218 ↗
24. Effect of cutting tool geometries on the ductile-brittle transition of monocrystalline sapphire10.1016/j.ijmecsci.2018.09.015 ↗
25. 3-D Raman spectroscopy measurements of the symmetry of residual stress fields in plastically deformed sapphire crystals10.1016/j.actamat.2007.04.036 ↗
26. Ultrasonic vibration-assisted scratch-induced characteristics of C-plane sapphire with a spherical indenter10.1016/j.ijmachtools.2012.07.009 ↗
27. Ductile-Regime grinding: a new technology for machining brittle materials10.1115/1.2899676 ↗
28. A model for crack initiation in elastic/plastic indentation fields10.1007/BF00552240 ↗
29. Effects of crystal orientation on the crack propagation of sapphire by sequential indentation testing
30. Unique crack behaviors of glass BK7 occurred in successive double scratch under critical load of median crack initiation10.1016/j.jeurceramsoc.2020.02.049 ↗
31. Grinding induced damage in ceramics10.1016/S0924-0136(02)00952-4 ↗
32. Predictive modeling of force and power based on a new analytical undeformed chip thickness model in ceramic grinding10.1016/j.ijmachtools.2012.10.006 ↗
33. Analytical models of scratch hardness10.1016/0301-679X(96)00014-X ↗
34. Ultrasonic vibration-assisted scratch characteristics of silicon carbide-reinforced aluminum matrix composites10.1016/j.ceramint.2014.03.073 ↗
35. Material removal behavior in scratching of zirconia ceramic surface treated with laser thermal shock10.1007/s00170-015-8098-7 ↗
36. Nucleation location and propagation direction of radial and median cracks for brittle material in scratching10.1016/j.ceramint.2019.01.046 ↗