Effect of diamond grain shape on gallium nitride nano-grinding process
Source abstract
Abstract
In the grinding process, the quality of the product in the process is affected by many factors. In order to improve the processing quality and take into account the processing efficiency, the selection of a reasonable abrasive grain shape can be considered. This is a low-cost and highly feasible approach. In this article, the molecular dynamics method was employed to simulate the process of grinding GaN with four common synthetic diamond of abrasive grains (spherical, octahedron, cubic and cub-octahedron), and the surface morphology, material removal rate, temperature, potential energy, grinding force, substrate structure deformation, subsurface damage and dislocation were investigated. The results show that the cubic abrasive grain has the highest material removal rate with the number of chip atoms per unit area about 1.68 times that of the cub-octahedron abrasive grain. The lowest subsurface temperature of the octahedron abrasive grain during processing is 498 K. In contrast, the other three grits have similar subsurface temperatures of 540 K, 535 K and 545 K, respectively. The tangential force per unit area of octahedron abrasive grain is about 0.68761 (spherical: 0.23987, cubic: 0.4476, cubo-octahedral: 0.4314), but its potential energy is the most stable during processing. The shape of the abrasive grain has no significant effect on the coefficient of friction, while it has a significant effect on the subsurface damage. The depth of subsurface damage is the smallest for both cubic and cub-octahedron abrasive grain (2.4 nm), while cub-octahedron abrasive grain is more capable of promoting the generation of dislocations within the substrate. In addition, the performance of cubic and cub-octahedron abrasive grain at different grinding depths was further explored. Number of chip atoms, temperature, grinding force and subsurface damage all increase with the grinding depth. Nevertheless, the machining performance of cubic abrasive grain is still superior to that of cub-octahedron abrasive grain when the grinding depth is more than 1 nm. The outcome of this study may provide a micro-scale insight into the selection of abrasive grain shapes for processing GaN substrates.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. GaN-based RF power devices and amplifiers10.1109/JPROC.2007.911060 ↗
2. High-luminosity blue and blue-green gallium nitride light-emitting diodes10.1126/science.267.5194.51 ↗
3. Ohmic and rectifying contacts on bulk AlN for radiation detector applications10.1002/pssc.201100341 ↗
4. The progress of AlN bulk growth and epitaxy for electronic applications10.1002/pssa.200880758 ↗
5. Bulk GaN crystals grown by HVPE10.1016/j.jcrysgro.2009.01.046 ↗
6. Growth and strain characterization of high quality GaN crystal by HVPE10.1016/j.jcrysgro.2011.12.020 ↗
7. Growth of bulk GaN crystals10.1063/5.0009900 ↗
8. Molecular dynamics study on deformation behaviour of monocrystalline GaN during nano abrasive machining
9. Quantitative analysis of grinding performance of cubic silicon carbide surface texture lubricated with water film10.1016/j.triboint.2023.108267 ↗
10. Atomistic simulation on the removal mechanism of monocrystal silicon carbide with textured surface nano-machining in water lubrication10.1016/j.jmapro.2023.05.011 ↗
11. Effects of initial temperature on the damage of GaN during nanogrinding10.1016/j.apsusc.2021.149771 ↗
12. Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals
13. Investigation on gallium nitride with N-vacancy defect nano-grinding by molecular dynamics10.1016/j.jmapro.2020.06.018 ↗
14. Molecular dynamics simulation of laser assisted grinding of GaN crystals10.1016/j.ijmecsci.2022.107856 ↗
15. Study on subsurface damage mechanism of gallium nitride in nano-grinding10.1016/j.mssp.2021.105760 ↗
16. Temperature effect on mechanical response of c-plane monocrystalline gallium nitride in nanoindentation: a molecular dynamics study10.1016/j.ceramint.2020.02.035 ↗
17. Molecular dynamics study on grinding mechanism of polycrystalline silicon carbide10.1016/j.diamond.2022.109541 ↗
18. Dependence of tribological behavior of GaN crystal on loading direction: a molecular dynamics study10.1063/1.5093227 ↗
19. Investigation on nano-grinding process of GaN using molecular dynamics simulation: nano-grinding parameters effect10.1016/j.jmapro.2023.07.046 ↗
20. Effects of surface texturing on nanotribological properties and subsurface damage of monocrystalline GaN subjected to scratching investigated using molecular dynamics simulation10.1016/j.apsusc.2020.148277 ↗
21. Investigation of different grain shapes and dressing to predict surface roughness in grinding using kinematic simulations10.1016/j.precisioneng.2013.02.009 ↗
22. Effect of abrasive particle shape on the development of silicon substrate during nano-grinding10.1016/j.commatsci.2021.110420 ↗
23. A numerical study of ultraprecision machining of monocrystalline silicon with laser nano-structured diamond tools by atomistic simulation10.1016/j.apsusc.2016.10.014 ↗
24. Evolution of nano-cracks in single-crystal silicon during ultraprecision mechanical polishing10.1016/j.jmapro.2020.08.005 ↗
25. Mechanism of polishing lutetium oxide single crystals with polyhedral diamond abrasive grains based on molecular dynamics simulation10.1016/j.apsusc.2023.156549 ↗
26. Nanotribological simulations of multi-grit polishing and grinding10.1016/j.wear.2015.03.006 ↗
27. Evolution of topography and material removal during nanoscale grinding
28. Determination of the efficiency of hot nano-grinding of mono-crystalline fcc metals using molecular dynamics method10.3390/mi13030415 ↗
29. Davim · 2011
30. Visualization and analysis of atomistic simulation data with OVITO – the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
31. Three-dimensional molecular dynamics simulation of atomic scale precision processing using a pin tool
32. Nosé-Hoover chains : the canonical ensemble via continuous dynamics10.1063/1.463940 ↗
33. Nano-grinding process of single-crystal silicon using molecular dynamics simulation: nano-grinding parameters effect10.1016/j.mssp.2022.106531 ↗
34. Subsurface damage mechanism of high speed grinding process in single crystal silicon revealed by atomistic simulations10.1016/j.apsusc.2014.10.149 ↗
35. Molecular dynamics research on ultra-high-speed grinding mechanism of monocrystalline nickel10.1016/j.apsusc.2018.06.042 ↗
36. Application of a compressed air jet for cleaning of wheel surface in grinding nickel-based super alloy Inconel 71810.1016/j.cirpj.2022.02.004 ↗
37. Application of a cryogenic cooling system on the grinding operation of polyether ether ketone biomaterial (PEEK)10.1007/s13369-022-07497-8 ↗
38. Evaluation of the grinding process utilizing an auxiliary compressed air jet on cleaning the grinding wheel surface10.1177/09544089221109835 ↗
39. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
40. The removal mechanism of monocrystalline Si in the process of double diamond abrasive polishing by molecular dynamics simulation10.1007/s11249-021-01445-7 ↗
41. L.C.U.S. Lawrence Livermore National Laboratory LLNL, Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
42. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data10.1088/0965-0393/18/8/085001 ↗
43. Atomic structures and energies of partial dislocations in wurtzite GaN10.1103/PhysRevB.70.035309 ↗
44. Surface deformation, phase transition and dislocation mechanisms of single crystalline 6H-SiC in oblique nano-cutting10.1016/j.apsusc.2022.152944 ↗