Bismuth as efficient sintering aid for TiO2-based low temperature dye sensitized solar cell
Source abstract
Abstract
Flexible dye sensitized solar cell (DSSC) developed at low temperature with low conversion efficiency due to the poor interparticle contact and charge transfer has limited their further development. In this research, bismuth (Bi) nanoparticles were implemented as titanium dioxide (TiO2) photoanode sintering aid to combat this issue. By utilising the liquid phase sintering theory, interparticle contact of photoanode was improved due to neck formation at the TiO2-Bi matrix. This feat was achieved even at low temperature (150 degrees C and 200 degrees C) because Bi have a low melting point of 271.5 degrees C. The charge transfer was also found to have increased while the resistance lowered with the implementation of Bi from the plasmonic effects of Bi nanoparticles. The highest conversion efficiency was obtained at 7.93 % for the TiO2-5wt% Bi sample sintered at 200 degrees C. The efficiency was 2%-16 % higher than controlled DSSC samples prepared at high temperature (450 degrees C). The improvement in interparticle contact due to neck formation and enhanced charge transfer with reduced recombination reactions was attrib-uted as the reason for the superior performance. Increasing the Bi composition even further caused reduction in the efficiency due to layer cracking and electron trapping sites from high amount of Bi.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Luminescence Properties of Advanced Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Advances in upconversion enhanced solar cell performance10.1016/j.solmat.2021.111234 ↗
2. Microwave heating to form porous TiO2 layer on high-haze FTO film for dye-sensitized solar cell10.1016/j.mssp.2023.107582 ↗
3. Emerging applications of metal-organic frameworks and derivatives in solar cells: recent advances and challenges10.1016/j.mser.2022.100714 ↗
4. Engineering flexible dye-sensitized solar cells for portable electronics10.1016/j.solener.2018.11.017 ↗
5. 2-D Mxene flakes as potential replacement for both TCO and Pt layers for Dye-Sensitized Solar cell10.1016/j.ceramint.2021.06.225 ↗
6. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
7. Organic solar cell with efficiency over 20% and VOC exceeding 2.1 V enabled by tandem with all-inorganic perovskite and thermal annealing-free process
8. Hydroxamic acid pre-adsorption raises the efficiency of cosensitized solar cells10.1038/s41586-022-05460-z ↗
9. Recent advances in the development of flexible dye-sensitized solar cells: fabrication, challenges and applications-a review10.1088/2058-8585/acb660 ↗
10. Recent advancements and challenges in flexible low temperature dye sensitised solar cells
11. Current advancement of flexible dye sensitized solar cell: a review10.1016/j.ijleo.2021.168089 ↗
12. Experimental and theoretical insight into DSSCs mechanism influenced by different doping metal ions10.1016/j.apsusc.2022.153607 ↗
13. Synergy light-trapping-enhanced solar energy conversion in DSSCs containing texture pit and silver nanoparticles10.1016/j.mssp.2022.106774 ↗
14. A novel bilayer photoanode made of carbon nanotubes incorporated TiO2 nanorods and Mg2+ doped TiO2 nanorods for flexible dye-sensitized solar cells10.1016/j.tsf.2017.11.030 ↗
15. Improved electron transfer of TiO2 based dye sensitized solar cells using Ge as sintering aid10.1016/j.ijleo.2017.11.073 ↗
16. Chemical sintering of TiO2 based photoanode for efficient dye sensitized solar cells using Zn nanoparticles10.1016/j.ceramint.2018.07.062 ↗
17. Improved charge transfer through the minimal addition of Pb as a sintering aid to TiO2-based low-temperature dye sensitised solar cell10.1016/j.ceramint.2023.02.128 ↗
18. de Oro Calderon · 2022 · vol. 3 · 481
19. Research Update: bismuth based materials for photovoltaics
20. A photoanode with plasmonic nanoparticles of earth abundant bismuth for photoelectrochemical reactions10.1039/D0NA00641F ↗
21. Comparative study of bismuth ferrite deposition method on TiO2 nanotube and performance of hydrogen evolution in a photoelectrochemical dye-sensitized solar cell tandem system
22. TiO2/Bi5O7I composite films for dye-sensitized solar cells10.1007/s11664-019-07868-2 ↗
23. Sol-gel hydrothermal synthesis of bismuth-TiO2 nanocubes for dye-sensitized solar cell10.1016/j.ceramint.2010.05.027 ↗
24. Enhanced open-circuit voltage of dye-sensitized solar cells using Bi-doped TiO2 nanofibers as working electrode and scattering layer10.1016/j.solener.2016.05.021 ↗
25. Controllable growth of vertically aligned Bi-doped TiO2 nanorod arrays for all-oxide solid-state DSSCs10.1007/s00339-016-0389-9 ↗
26. Effect of particle size distribution on the electrochemical performance of micro-sized silicon-based negative materials10.1039/C8RA00539G ↗
27. Brookite vs. rutile vs. anatase: what's behind their various photocatalytic activities?10.1016/j.jece.2022.107722 ↗
28. Mesoporous TiO2 thin films: state of the art
29. Application of bi-nanoparticle on dose enhancement effect in two different polymer gel dosimeter using spectrophotometer10.4103/0973-1482.187295 ↗
30. Visible-light activation of TiO2 photocatalysts: advances in theory and experiments10.1016/j.jphotochemrev.2015.08.003 ↗
31. Investigating the remanufacturing potential of dye-sensitized solar cells10.3390/su14095670 ↗
32. Synthesis of micro sphere-like bismuth nanoparticles by microwave assisted polyol method; Designing a novel electrochemical nanosensor for ultra-trace measurement of Pb2+ ions10.1039/C5NJ00532A ↗
33. Fabrication of flexible dye sensitized solar cells on plastic substrates10.1016/j.nanoen.2012.10.004 ↗
34. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
35. Making porous metals
36. Remarkable 8.3% efficiency and extended electron lifetime towards highly stable semi-transparent iodine-free DSSCs by mitigating the in-situ triiodide generation10.1016/j.cej.2022.136777 ↗
37. A photoanode with plasmonic nanoparticles of earth abundant bismuth for photoelectrochemical reactions10.1039/D0NA00641F ↗
38. Systematic characterization of the effect of Ag@TiO2 nanoparticles on the performance of plasmonic dye-sensitized solar cells10.1038/s41598-017-15541-z ↗
39. Dye sensitized solar cells: from genesis to recent drifts10.1016/j.rser.2016.11.136 ↗
40. Dye-sensitised solar cells: development, structure, operation principles, electron kinetics, characterisation, synthesis materials and natural photosensitisers10.1016/j.rser.2016.06.045 ↗
41. Investigation of low temperature processed titanium dioxide (TiO2) films for printed dye sensitized solar cells (DSSCs) for large area flexible applications
42. Low-temperature chemical sintered TiO2 photoanodes based on a binary liquid mixture for flexible dye-sensitized solar cells10.33961/jecst.2022.00262 ↗
43. Fully flexible dye-sensitized solar cells photoanode modified with titanium dioxide-graphene quantum dot light scattering layer10.1016/j.solener.2020.11.001 ↗
44. Synthesis and characterization of various doped TiO2 nanocrystals for dye-sensitized solar cells10.1021/acsomega.0c01614 ↗