journal article·2023-01

Modeling and optimizing femtosecond laser process parameters for high-efficient and near damage-free micromachining of single-crystal GaN substrate

Huilai Wei, Chuanzhen Huang, Hanlian Liu, Dun Liu, Peng Yao, Dongkai Chu

Publisher page

Abstract

This paper presents a high-efficient and near damage-free micromachining method for gallium nitride (GaN) using femtosecond laser direct writing. To provide a precise selection principle of process parameters, the influences and interactions on GaN processing of parameters are systematically studied. Variance analysis results of single factor experiments show that laser power, scan speed, scan times and repetition frequency mainly influence the microgroove depth, microgroove width, heat-affected zone (HAZ) and material removal rate (MRR). In addition, the response surface method (RSM) indicates the interaction between scan times and repetition frequency has an appreciable influence on HAZ. And the interaction between scan speed and laser power plays a key role in MRR. Quadratic polynomial prediction models have been established by RSM and have discrepancies of less than 9.5% compared with the experimental results. The optimized parameters are important to achieve the desired control and high efficiency of femtosecond laser micromachining of single-crystal GaN substrate.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Surface Roughness and Optical Measurements · Ocular and Laser Science Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Growth of GaN micro/nano layer arrays by chemical vapor deposition10.1088/0957-4484/27/35/355201 ↗
2. Gallium nitride-based photodiode: a review10.1016/j.matpr.2020.12.729 ↗
3. Comparative study of gallium nitride and silicon carbide MOSFETs as power switching applications under cryogenic conditions10.1016/j.cryogenics.2020.103071 ↗
4. High performance, self-powered and thermally stable 200-750 nm spectral responsive gallium nitride (GaN) based broadband photodetectors10.1016/j.solmat.2021.111033 ↗
5. Substrates for gallium nitride epitaxy10.1016/S0927-796X(02)00008-6 ↗
6. A survey of Gallium Nitride HEMT for RF and high-power applications, Superlattice
7. Investigation of vibration-assisted nano-grinding of gallium nitride via molecular dynamics10.1016/j.mssp.2020.105372 ↗
8. Photoelectrochemical etching of gallium nitride surface by complexation dissolution mechanism10.1016/j.apsusc.2017.03.063 ↗
9. Fabrication of high aspect ratio gallium nitride nanostructures by photochemical etching for enhanced photocurrent and photoluminescence property10.1016/j.scriptamat.2017.11.022 ↗
10. Characterization of AlGaN/GaN degradations during plasma etching for power devices10.1016/j.mee.2021.111619 ↗
11. Dry etching characteristics of GaN using Cl2/BCl3 inductively coupled plasmas10.1016/j.apsusc.2010.07.088 ↗
12. Improvement of GaN plasma etching uniformity by optimizing the coil electrode with plasma simulation and experimental validation10.1016/j.surfcoat.2020.126252 ↗
13. Micromachining and dicing of sapphire, gallium nitride and micro-LED devices with UV copper vapour laser10.1016/j.tsf.2003.11.133 ↗
14. Predictive model and parametric analysis of laser marking process on gallium nitride material using diode-pumped Nd: YAG laser10.1016/j.optlastec.2019.01.035 ↗
15. Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: comparing with laser machining10.1016/j.mssp.2018.12.037 ↗
16. Microfabrication in free-standing gallium nitride using UV laser micromachining10.1016/j.apsusc.2005.07.117 ↗
17. Precise laser ablation with ultrashort pulses10.1016/S0169-4332(96)00613-7 ↗
18. Influence of laser parameters and material properties on micro-drilling with femtosecond laser pulses10.1007/s003390051418 ↗
19. High-speed ablation etching of GaN semiconductor using femtosecond laser10.1016/S0030-4018(01)01002-1 ↗
20. Femtosecond laser machining of gallium nitride10.1016/S0921-5107(00)00790-X ↗
21. Rice · 2003 · 299
22. Fabrication of microchannels in single-crystal GaN by wet-chemical-assisted femtosecond-laser ablation10.1016/j.apsusc.2009.04.159 ↗
23. Fabrication of periodic nano-hole array on GaN surface by fs laser for improvement of extraction efficiency in blue LED10.1016/j.phpro.2010.08.138 ↗
24. Incubation effect during laser micromachining of GaN films with femtosecond pulses10.1007/s10854-019-01373-2 ↗
25. Femtosecond laser micromachining of GaN using different wavelengths from near-infrared to ultraviolet10.1016/j.jallcom.2021.160259 ↗
26. Investigation and modelling of hybrid laser-waterjet micromachining of single crystal SiC wafers using response surface methodology10.1016/j.mssp.2017.05.029 ↗
27. Characterization of the femtosecond laser micro-grooving process for germanium substrates10.4028/www.scientific.net/MSF.874.291 ↗
28. Focus shaping of linearly polarized Bessel-Gaussian beam modulated by Bessel gratings using a radial shift and a large numerical aperture10.1007/s11082-022-03982-4 ↗
29. Machining of aluminum nitride with ultra-violet and near-infrared Nd: YAG lasers10.1016/j.jmatprotec.2007.02.025 ↗
30. Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation10.1016/j.mssp.2020.105299 ↗