Ohmic contact formation and activation for reduced graphene oxide and Sb bilayers contacted CdTe solar cells
Source abstract
Abstract
Abstract Ohmic back contact is one of the keys to fabricate high efficient CdTe solar cells, as it can improve fill factor FF and open-circuit voltage Voc. In this work, antimony-containing reduced graphene oxide (RGO) was prepared and used as a back contact for CdTe thin film solar cells, in which antimony is an effective dopant for CdTe and RGO acts as a hole transport layer and diffusion barrier of antimony in the solar cells. Post deposition annealing was performed to activate the back contact layer and passivate the interface defect states. Electrical performance and apparent quantum efficiency characterization were performed to investigate device performance of CdTe solar cells with antimony-containing RGO back contacts. The results indicate that, the introduction of extrinsic doping near the CdTe back surface serves to reduce the back contact depletion width and enhance the built-in potential to enable the tunnelling of majority carrier holes through the barrier, and the RGO is beneficial for the formation of Ohmic back contact on CdTe.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Performance limits and status of single-junction solar cells with emphasis on CIGS10.1109/JPHOTOV.2014.2359135 ↗
2. Solar cell efficiency tables (version 55)10.1002/pip.3228 ↗
3. Role of fermi-level pinning in nanotube Schottky diodes10.1103/PhysRevLett.84.4693 ↗
4. Stability of CdTe/CdS thin-film solar cells10.1016/S0927-0248(00)00014-3 ↗
5. Dependence of carrier lifetime on Cu-contacting temperature and ZnTe:Cu thickness in CdS/CdTe thin film solar cells10.1016/j.tsf.2008.11.008 ↗
6. Photoluminescence studies in N, P, As implanted cadmium telluride10.1016/0038-1098(83)90539-2 ↗
7. p‐type arsenic doping of CdTe and HgTe/CdTe superlattices grown by photoassisted and conventional molecular‐beam epitaxy10.1116/1.577000 ↗
8. Acceptor states in CdTe and comparison with ZnTe10.1103/PhysRevB.30.3344 ↗
9. Monocrystalline CdTe solar cells with open-circuit voltage over 1 V and efficiency of 17%10.1038/nenergy.2016.67 ↗
10. CdTe solar cells with open-circuit voltage breaking the 1 V barrier10.1038/nenergy.2016.15 ↗
11. Enhanced p-type dopability of P and as in CdTe using non-equilibrium thermal processing10.1063/1.4926748 ↗
12. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
13. Overcoming carrier concentration limits in polycrystalline CdTe thin films with in situ doping10.1038/s41598-018-32746-y ↗
14. Synthesis of Sb-doped p -type CdTe nanowires and their application as high-performance nano-Schottky barrier diodes10.1166/jnan.2012.1073 ↗
15. Nature of AX centers in antimony-doped cadmium telluride nanobelts10.1021/nl503781u ↗
16. Back contacts to CSS CdS/CdTe solar cells and stability of performances10.1016/S0040-6090(99)00765-8 ↗
17. Growth of polycrystalline CdS and CdTe thin layers for high efficiency thin film solar cells10.1016/S0254-0584(00)00316-3 ↗
18. A highly efficient and stable CdTe/CdS thin film solar cell10.1016/S0927-0248(98)00204-9 ↗
19. Chemical stability of Sb2Te3 back contacts to CdS/CdTe solar cells10.1016/S0040-6090(99)00807-X ↗
20. Doping graphene with metal contacts10.1103/PhysRevLett.101.026803 ↗
21. Novel Cu nanowires/graphene as the back contact for CdTe solar cells10.1002/adfm.201102809 ↗
22. Review on the graphene/nanotube application in thin film solar cells10.1016/j.matlet.2016.02.087 ↗
23. A facile preparation route for boron-doped graphene, and its CdTe solar cell application10.1039/C0EE00512F ↗
24. Two-dimensional atomic crystals10.1063/1.4797258 ↗
25. Pyrolytic formation of highly crystalline graphite films10.1063/1.1708759 ↗
26. Improved synthesis of graphene oxide10.1021/nn1006368 ↗
27. Epitaxial growth processes of graphene on silicon substrates10.1143/JJAP.49.01AH03 ↗
28. Controlledn-doping in chemical vapour deposition grown graphene by antimony10.1088/0022-3727/48/1/015307 ↗
29. Raman spectra of graphite oxide and functionalized graphene sheets10.1021/nl071822y ↗
30. First- and second-order Raman scattering from finite-size crystals of graphite10.1103/PhysRevB.20.392 ↗
31. Spatially resolved Raman spectroscopy of single- and few-layer graphene10.1021/nl061702a ↗
32. Investigation of Raman and photoluminescence studies of reduced graphene oxide sheets10.1007/s00339-011-6720-6 ↗
33. Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide10.1016/j.carbon.2007.02.034 ↗
34. Effects of oxidation on the defect of reduced graphene oxides in graphene preparation10.1016/j.jcis.2015.02.059 ↗
35. Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells10.1021/nn100551j ↗
36. Effects of the Au/CdTe back contact on IV and CV characteristics of Au/CdTe/CdS/TCO solar cells10.1063/1.363946 ↗
37. Reduction of recombination current in CdTe/CdS solar cells10.1063/1.114369 ↗
38. Self-compensation in arsenic doping of CdTe10.1038/s41598-017-04719-0 ↗
39. Apparent quantum efficiency effects in CdTe solar cells10.1063/1.1667605 ↗
40. Voltage dependent carrier collection in CdTe solar cells10.1557/PROC-668-H5.17 ↗
41. Time-resolved photoluminescence studies of CdTe solar cells10.1063/1.1597974 ↗
42. Antimony diffusion in CdTe10.1109/JPHOTOV.2017.2655033 ↗
43. Built-in potential and validity of the Mott-Schottky analysis in organic bulk heterojunction solar cells10.1103/PhysRevB.84.153201 ↗
44. Controlled activation of ZnTe:Cu contacted CdTe solar cells using rapid thermal processing10.1016/j.solmat.2014.10.045 ↗
45. The competing roles of i-ZnO in Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2016.07.049 ↗