Investigation of LaNiO3 decorated over rGO composite for improved electrocapacitive performance
Source abstract
Abstract
The excessive usage of fossil fuels causing environmental contamination and energy loss, is becoming a significant issue. With these energy challenges there is a growing need for alternatives for supercapacitor in the present day. In this work, we successfully synthesize a three-dimensional hierarchical LaNiO 3/rGO composite through a hydrothermal approach. The prepared composite demonstrated expectational specific capacitance of 1723 F/g at 1 A/g calculated from GCD plots which showed stability after 5000th cycles with lower charge transfer resistance of 0.82 Ω with columbic efficiency of (93 %). The enormous surface area provided by these nanostructures allows for easier ion diffusion which in turn increases the specific capacitance. The LaNiO 3/rGO composite showed that it had excellent stability for energy storage devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Decoration of g-C3N4 with hydrothermally synthesized FeWO4 nanorods as the high-performance supercapacitors10.1016/j.cplett.2018.09.070 ↗
2. Synthesis of Co3O4/NiCo2O4 double-shelled nanocages with enhanced capacitive and oxygen evolution reaction properties in battery-supercapacitor hybrid devices
3. An overview of silicon-air batteries: principle, current state and future perspectives10.1016/j.ccr.2024.216045 ↗
4. Hierarchical nanoarchitecture of vanadium disulfide decorated 3D porous carbon skeleton with improved electrochemical performance toward Li ion battery and supercapacitor10.1016/j.ceramint.2022.03.277 ↗
5. Microwave-assisted in-situ isomorphism via introduction of Mn into CoCo2O4 for battery-supercapacitor hybrid electrode material10.1016/j.cej.2021.132729 ↗
6. Improvement in capacitive performance of ZnS with MnO2 via composite (ZnS/MnO2) strategy developed by hydrothermal technique10.1016/j.est.2023.110034 ↗
7. Fabrication of MnSe/WSe2 nanohybrid electrode prepared through hydrothermal method for supercapacitor applications10.1016/j.ceramint.2023.12.042 ↗
8. Synthesis and electrochemical performance of MgFe2O4 with g-C3N4 on Ni-foam as composite anode material in supercapacitors10.1007/s10854-022-09104-w ↗
9. Synthesis and characterization of CeAlO3 via solid state method10.1016/j.jssc.2022.123220 ↗
10. Facile synthesis of perovskite ZnMnO3 composite with reduced graphene oxide via solvothermal route for supercapacitor applications10.1007/s10854-024-12359-0 ↗
11. Synthesis of NiMn2O4/PANI nanosized composite with increased specific capacitance for energy storage applications10.1039/D4DT00722K ↗
12. Advances in graphene-based electrode for triboelectric nanogenerator
13. Construction of vacancies-enriched CuS/Fe2O3 with nano-heterojunctions as negative electrode for flexible solid-state supercapacitor10.1016/j.jallcom.2022.165443 ↗
14. Hydrothermally synthesized ZnSe@FeSe nanocomposite: a promising candidate for energy storage devices10.1016/j.ijhydene.2024.01.293 ↗
15. Controlled synthesis of 3D hierarchical NiSe microspheres for high-performance supercapacitor design10.1039/C6RA06909F ↗
16. Hydrothermal synthesis of BaCeO3@rGO nanohybrid as electrode material for supercapacitor devices10.1016/j.jpcs.2024.111973 ↗
17. An active mesoporous MgIn2O4/gCN electrocatalyst fabricated via hydrothermal route for efficient oxygen evolution reaction
18. CuCo2O4/CF cathode with bifunctional and dual reaction centers exhibits high RhB degradation in electro-Fenton systems10.1016/j.jelechem.2024.118072 ↗
19. Zinc selenide/cobalt selenide in nitrogen-doped carbon frameworks as anode materials for high-performance sodium-ion hybrid capacitors10.1007/s42114-024-00956-w ↗
20. Facile synthesis of SmSe2 over multiwalled carbon nanotubes for efficient water-splitting applications
21. A Raman spectroelectrochemical investigation of chemical bath deposited CuxS thin films and their modification10.1016/j.colsurfa.2006.08.045 ↗
22. Construction of efficient SrMnO3@rGO nanohybrid as an electrode material for improved electrocapacitive performance10.1016/j.est.2024.112901 ↗
23. Reviews and prospectives of Co3O4-based nanomaterials for supercapacitor application10.1002/slct.201904485 ↗
24. Quasi-solid-state silicon-air batteries with high capacities and wide-temperature adaptabilities
25. Perovskite-type samarium iron oxide adorned on reduced graphene oxide composite: a high-performance electrocatalyst for OER10.1016/j.diamond.2024.111072 ↗
26. Sulfate-functionalized RuFeOx as highly efficient oxygen evolution reaction electrocatalyst in acid10.1002/adfm.202101405 ↗
27. First principles calculation to investigate the effect of Mn substitution on Cu site in CeCu 3−x Mn x V 4 O 12 (x = 0, 1, 2 and 3) system10.1039/D3RA00263B ↗
28. Facile construction and controllable design of CoTiO3@Co3O4/NCNO hybrid heterojunction nanocomposite electrode for high-performance supercapacitors10.1016/j.electacta.2022.139868 ↗
29. Review and prospect of NiCo2O4-based composite materials for supercapacitor electrodes10.1016/j.jechem.2018.05.010 ↗
30. Characterization of MgCo2O4 as an electrode for high performance supercapacitors10.1016/j.electacta.2015.02.081 ↗
31. Morphology controlled preparation of ZnCo2O4 nanostructures for asymmetric supercapacitor with ultrahigh energy density10.1016/j.energy.2017.02.018 ↗
32. Co2Mo3O8/Co3O4 micro-flowers architectured material for high-performance supercapacitor electrodes10.1016/j.jallcom.2022.167063 ↗
33. Hierarchical MnMoO4/CoMoO4 heterostructured nanowires with enhanced supercapacitor performance
34. Novel synthesis of hierarchical NiGa2O4@MnO2 core-shell hetero-nanostructured nanowall arrays on carbon cloth for high-performance all-solid-state asymmetrical supercapacitors10.1016/j.jcis.2020.11.078 ↗
35. Multi-interface combination of bimetallic selenide and V4C3Tx MXene for high-rate and ultrastable sodium storage devices10.1021/acsnano.3c07977 ↗
36. Fabrication of Mn doped BiFeO3 as an electrode material for supercapacitor applications10.1016/j.est.2024.111054 ↗
37. Selective growth of Zn–Co–Se nanostructures on various conductive substrates for asymmetric flexible hybrid supercapacitor with enhanced performance10.1002/admt.201900873 ↗
38. Fabrication of efficient MnTe/rGO composite by using sonication method for hybrid supercapacitor devices10.1016/j.est.2024.115231 ↗
39. Novel molybdenum sulfide-decorated graphitic carbon nitride nanohybrid for enhanced electrochemical oxygen evolution reaction
40. One-pot synthesis of LaMnO3/Mn3O4 nanocomposite: impact of calcination temperature on the synergetic effect towards high energy supercapacitor performance10.1002/slct.201800876 ↗
41. Influence of CeAlO 3 nanoparticles on the performances of silane coatings for AZ31 alloy
42. Fabrication of LaCrO3@SiO2 nanoparticles supported with graphene-oxide for capacitive energy storage and photocatalytic degradation applications10.1007/s10904-023-02814-6 ↗
43. Hydrothermal synthesis of Nd-doped FeTiO3 perovskite electrode for enhanced energy storage applications10.1016/j.est.2024.110920 ↗
44. Development of cost-efficient BaMnO3/rGO nanocomposite as electrode for energy storage applications in supercapacitor
45. The exploration of Lanthanum based perovskites and their complementary electrolytes for the supercapacitor applications10.1016/j.rinp.2017.02.013 ↗
46. Anion charge storage through oxygen intercalation in LaMnO3 perovskite pseudocapacitor electrodes10.1038/nmat4000 ↗
47. Polyvinylpyrrolidone-assisted solvothermal synthesis of porous LaCoO3 nanospheres as supercapacitor electrode10.20964/2017.08.47 ↗
48. Two-dimensional perovskite LaNiO3 nanosheets with hierarchical porous structure for high-rate capacitive energy storage10.1016/j.electacta.2017.11.099 ↗
49. ZnAl2O4 decorated on graphitic carbon nitride (g-CN) composite as efficient electrocatalyst for water oxidation in alkaline medium10.1016/j.diamond.2024.111529 ↗
50. Improved electrochemical behavior of Co3O4@graphtic carbon nitride nanosheets for supercapacitor applications10.1016/j.electacta.2024.144589 ↗
51. Application of SrFeO3 perovskite as electrode material for supercapacitor and investigation of Co-doping effect on the B-site10.55730/1300-0527.3475 ↗
52. Cobalt oxide supported on phosphorus-doped g-C3N4 as an efficient electrocatalyst for oxygen evolution reaction10.1021/acsaem.9b00273 ↗
53. Engineering mesoporous Na4Mn0.9Ni0.1V(PO4)3@NC microspheres cathode towards advanced sodium ion batteries10.1016/j.est.2024.112890 ↗
54. Nanospheres type Morphology for regulating the electrochemical property of CeO2 nanostructures for energy storage system10.1007/s10971-023-06035-8 ↗
55. Facile synthesis of the SnTe/SnSe binary nanocomposite via a hydrothermal route for flexible solid-state supercapacitors10.1039/D3RA01028G ↗
56. Development of Mn doped ZnAl2O4 via hydrothermal method as photocatalyst for Cr(VI) reduction under visible light10.1016/j.ceramint.2024.04.149 ↗
57. Improvement of SnFe2O4 OER electrochemical property by Sm doping for water splitting10.1016/j.ceramint.2024.03.050 ↗
58. Ag2Se/SnTe nanorod as potential candidate for energy conversion system developed via hydrothermal route10.1016/j.ceramint.2022.10.131 ↗
59. Improvement of the electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 cathode material by Al2O3 surface coating10.1016/j.jelechem.2020.113845 ↗
60. Electrochemical hydrogen storage materials: State-of-the-art and future perspectives10.1021/acs.energyfuels.3c05138 ↗
61. Preparation and research of high-performance LaFeO3/RGO supercapacitor10.1007/s10008-022-05165-3 ↗
62. SmNiO3/SWCNT perovskite composite for hybrid supercapacitor10.1016/j.est.2023.107786 ↗
63. Mesoporous perovskite of interlocked nickel titanate nanoparticles for efficient electrochemical supercapacitor electrode10.1016/j.jallcom.2020.155134 ↗
64. HKUST-1/LaNiO3 hybrid composite as superior material for symmetrical pseudocapacitors10.1016/j.jallcom.2022.167991 ↗
65. Activated carbon-supported LaNiO3 perovskite nanocomposite supercapacitor electrode material exhibiting superior power density and life cycle10.1007/s11581-024-05832-7 ↗
66. Mesoporous LaFeO3 perovskite derived from MOF gel for all-solid-state symmetric supercapacitors10.1016/j.cej.2020.124030 ↗
67. Chowdhury
68. Improved electrochemical performance of CuS@ graphitic carbon nitride composite for supercapacitor applications10.1007/s10854-024-12952-3 ↗
69. Interfacial engineering of CuCo2S4/g-C3N4Hybrid nanorods for efficient oxygen evolution reaction10.1021/acs.inorgchem.1c01566 ↗
70. A procedure for evaluating the capacity associated with battery-type electrode and supercapacitor-type one in composite electrodes10.1149/2.1131816jes ↗
71. NiO-Co3O4-rGO as an efficient electrode material for supercapacitors and direct alcoholic fuel cells10.1002/admi.202100149 ↗
72. Catalytic performance of steam reforming of ethanol at low temperature over LaNiO3 perovskite10.1016/j.ijhydene.2013.01.005 ↗
73. CeNiO3/rGO composite as an efficient photocatalyst for the removal of environmental pollutants, Fullerenes, Nanotub
74. Three-dimensional ordered macroporous perovskite-type La1–xKxNiO3 catalysts with enhanced catalytic activity for soot combustion: the Effect of K-substitution10.1016/S1872-2067(18)63269-9 ↗
75. LaNiO3-nanorod/graphene composite as an efficient bi-functional catalyst for zinc–air batteries10.1039/C6RA16610E ↗
76. Phonon Raman scattering of perovskite LaNiO3 thin films10.1063/1.3464958 ↗
77. Characterization of manufacturing material and carbon nanohybrid for renewable energy and storage systems10.1016/j.est.2024.112289 ↗
78. N-doped reduced graphene oxide decorated NiSe2 nanoparticles for high-performance asymmetric supercapacitors10.1016/j.jpowsour.2019.03.123 ↗
79. Studies on the electrochemical intercalation/de-intercalation mechanism of NiMn2O4 for high stable pseudocapacitor electrodes10.1039/C5RA00407A ↗
80. Fabrication of NbTe2@rGO nanosheet by hydrothermal route for cost-effective supercapacitor electrode
81. Facile synthesis of SnSe-MnTe nanocomposite as a promising electrode for supercapacitor applications
82. NiMnO3-rGO nanocomposites in a cotton-based flexible yarn supercapacitor10.1007/s10854-023-11868-8 ↗
83. Rational construction of CoFe-S/rGO composites with enriched sulfur vacancies for high-performance supercapacitor10.1016/j.apsusc.2023.159063 ↗
84. Electrochemical evaluation of low crystalline CoFe2O4@Reduced graphene oxide nanocomposite for hybrid supercapacitor application10.1016/j.chemphys.2024.112372 ↗
85. Recent developments in MnNiO3@rGO nanohybrid for advanced energy storage devices
86. Crafting advanced supercapacitor electrodes with calcium manganese oxide in synergy with rGO and MWCNTs10.1016/j.jiec.2023.12.041 ↗
87. Facile synthesis of Zn2V2O7/RGO nanocomposite for enhancing the electrochemical performance and evaluating the supercapacitor device10.1016/j.inoche.2024.112544 ↗
88. LaNiO3/NiO hollow nanofibers with mesoporous wall: a significant improvement in NiO electrodes for supercapacitors10.1007/s10008-014-2641-6 ↗
89. Nanoarchitectonics of the supercapacitor performance of LaNiO3 perovskite on the graphitic-C3N4 doped reduced graphene oxide hydrogel10.1016/j.colsurfa.2021.127787 ↗
90. Self-assembly photocatalytic reduction synthesis of graphene-encapusulated LaNiO3 nanoreactor with high efficiency and stability for photocatalytic water splitting to hydrogen10.1016/j.cej.2018.09.031 ↗
91. LaNiO3/NiO hollow nanofibers with mesoporous wall: a significant improvement in NiO electrodes for supercapacitors10.1007/s10008-014-2641-6 ↗
92. Fabrication of Nd2S3 based rGO nanohybrid via hydrothermal route and evaluation of capacitive features toward supercapacitor application10.1016/j.mseb.2024.117207 ↗
93. Partial sulfur doping induced variation in morphology of MnFe2O4 with enhanced electrochemical performance for energy storage devices10.1007/s11814-023-1423-1 ↗
94. Reviewing the fundamentals of supercapacitors and the difficulties involving the analysis of the electrochemical findings obtained for porous electrode materials10.1016/j.ensm.2019.12.015 ↗
95. MXenes@metal-organic framework hybrids for energy storage and electrocatalytic application: insights into recent advances10.1016/j.cej.2023.144247 ↗
96. Mixed-phase bismuth ferrite oxide (BiFeO3) nanocomposites by green approach as an efficient electrode material for supercapacitor application10.1557/s43580-023-00603-4 ↗
97. Facile one-step process synthesized reduced graphene oxide/Mn3O4 nanocomposite for a symmetric supercapacitor10.1016/j.matlet.2020.127613 ↗
98. Improved electrochemical performance of rGO-wrapped MoO3 nanocomposite for supercapacitors10.1007/s00339-019-2779-2 ↗
99. Nanocomposite of (α-Mn3O4/MnO)@rGO as a high performance electrode material for supercapacitors10.1016/j.electacta.2021.138823 ↗
100. Enhanced specific capacitance of supercapacitors using wide band gap NdCrO3 and NdCrO3/graphene oxide nanocomposites