journal article·2024-10

Investigating the partial plastic formation mechanism of typical scratches on silicon wafers induced by rogue particles during chemical mechanical polishing

Siwen Lu, Jingjing Xia, Jun Yu, Zhanshan Wang

Publisher page

Abstract

The occurrence of scratches on silicon wafers during chemical mechanical polishing (CMP) is a common phenomenon that significantly affects the structural stability and electrical characteristics of integrated circuits. The complex interplay between abrasives, inorganic and organic substances in an aqueous environment, and the iterative evolution of surface morphology, collectively contribute to the limited understanding of CMP-induced scratches. This paper explores the full-plane scratch shape, directions, and number density on different crystal orientations, the microscopic form of scratches with plastic and brittle features for Si(111), Si(110), and Si(100) by the diamond particle doping method. The CMP scratches observed by profilometry display a plastic-like morphology and show no directional preference, irrespective of crystal orientation. The Si(110) exhibits the fewest scratches, while Si(111) has the most, with the volume modulus being a significant factor in this variation. The nature of CMP scratches, the material removal process due to polishing slurries, and the smoothing effect of hillock abrasion and by-product refilling are substantiated by an atomic force microscope and a high-resolution transmission electron microscope. During CMP, the relaxation effect of water solvent and hydrated oxide layer mitigates the hard touching between abrasives and silicon wafer, reducing the brittleness of silicon and the depth of sub-surface damage. The height of scratch hillocks is reduced through continuous scratching of polishing abrasives, and the bottom of scratches is covered by amorphous silica and a small amount of polycrystal silicon. The Fourier transform of transmission electron microscopic images shows the quasi-plastic nature of CMP scratches, indicating the disparity of filling materials between CMP scratches and scratches generated in dry air. This work highlights the distinct nature of CMP scratches, offering insights for guiding the manufacturing of defect-free ultrasmooth silicon wafers.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Integrated Circuits and Semiconductor Failure Analysis · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Single crystal silicon wafer polishing by pretreating pad adsorbing SiO2 grains and abrasive-free slurries10.1016/j.mssp.2021.106418 ↗
2. Investigation on the final polishing slurry and technique of silicon substrate in ULSI10.1016/S0167-9317(02)00908-5 ↗
3. Effect of ionic strength on ruthenium CMP in H 2 O 2 -based slurries10.1016/j.apsusc.2014.08.063 ↗
4. Grinding and lapping induced surface integrity of silicon wafers and its effect on chemical mechanical polishing10.1016/j.apsusc.2022.153982 ↗
5. Near-field microscopy inspection of nano scratch defects on the monocrystalline silicon surface10.1016/j.precisioneng.2019.02.008 ↗
6. Chemical mechanical polishing of silicon wafers using developed uniformly dispersed colloidal silica in slurry10.1016/j.jmapro.2023.01.007 ↗
7. Size distribution monitoring for chemical mechanical polishing slurries: an intercomparison of electron microscopy, dynamic light scattering, and differential mobility analysis10.1016/j.powtec.2021.10.045 ↗
8. Flatness maintenance and roughness reduction of silicon mirror in chemical mechanical polishing process10.1007/s11431-018-9414-6 ↗
9. Study of the humidity-controlled CeO2 fixed-abrasive chemical mechanical polishing of a single crystal silicon wafer10.1016/j.triboint.2022.108087 ↗
10. Scratch formation and its mechanism in chemical mechanical planarization (CMP)10.1007/s40544-013-0026-y ↗
11. Ductile or partial ductile mode machining of brittle materials10.1007/s00170-002-1364-5 ↗
12. Analysis of ductile mode and brittle transition of AFM nanomachining of silicon10.1016/j.ijmachtools.2012.05.011 ↗
13. Micro-morphology of single crystalline silicon surfaces during anisotropic wet chemical etching in KOH: velocity source forests10.1016/S0924-4247(01)00653-7 ↗
14. The effect of isopropyl alcohol concentration on the etching process of Si-substrates in KOH solutions10.1016/j.sna.2011.09.005 ↗
15. Effect of rogue particles on the sub-surface damage of fused silica during grinding/polishing10.1016/j.jnoncrysol.2007.11.015 ↗
16. Brittle and ductile fracture mechanics analysis of surface damage caused during CMP10.1149/1.2426877 ↗
17. Effect of crystal plane orientation on the friction-induced nanofabrication on monocrystalline silicon10.1186/1556-276X-8-137 ↗
18. Analysis of scratches formed on oxide surface during chemical mechanical planarization10.1149/1.3265474 ↗
19. Morphological characteristics and formation mechanism of latent scratches in chemical mechanical polishing10.1016/j.jmatprotec.2022.117689 ↗
20. The effect of slurry viscosity on chemical-mechanical polishing of silicon wafers10.1016/S0924-0136(02)00205-4 ↗
21. Crystallographic effect on subsurface damage formation in silicon microcutting10.1016/j.cirp.2012.03.070 ↗
22. Subsurface nanocracking in monocrystalline Si (001) induced by nanoscratching10.1016/j.engfracmech.2014.02.016 ↗
23. Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining10.1016/j.precisioneng.2008.10.008 ↗
24. The crystallographic change in sub-surface layer of the silicon single crystal polished by chemical mechanical polishing10.1016/j.triboint.2005.09.034 ↗
25. Process induced sub-surface damage in mechanically ground silicon wafers10.1088/0268-1242/23/7/075038 ↗
26. Sub-surface damage of ultra-thin monocrystalline silicon wafer induced by dry polishing, electron
27. Relationship between subsurface damage and surface roughness of optical materials in grinding and lapping processes10.1016/j.jmatprotec.2007.11.118 ↗
28. Scratch evolution for monocrystalline silicon during chemical- mechanical polishing
29. Bulk modulus and Young's modulus of nanocrystalline γ‐alumina10.1111/j.1151-2916.1994.tb04524.x ↗
30. Yu
31. Why is (111) silicon a better mechanical material for MEMS?10.1007/978-3-642-59497-7_157 ↗
32. Fu · 2001 · 14 · 406
33. Chemical effect on the material removal rate in the CMP of silicon wafers10.1016/j.wear.2010.11.006 ↗
34. Nanoscratch-induced deformation of single crystal silicon
35. Characterization of an amorphous carbon film covering a Mo grid during in situ heating TEM study10.1016/j.matchar.2013.01.011 ↗
36. TEM investigation of the role of the polycrystalline-silicon film/substrate interface in high quality radio frequency silicon substrates10.1016/j.matchar.2020.110174 ↗