journal article·2024-06Open access

Preparation and performance study of electroplated Ni–W/diamond ultrathin dicing blades

Lan Zhang, Hongyang Yu, Huizhong Ma

Abstract

In this study, Ni–W/diamond ultrathin dicing blades with various tungsten contents were fabricated using a composite electrodeposition technique by adding different concentrations of sodium tungstate to a nickel sulfamate plating solution utilizing a self-developed cathodic autorotating plating apparatus. The results showed that the tungsten content in the dicing blades increased, the deposition rate accelerated, the distribution uniformity of the diamond particles improved, and the mechanical properties were noticeably enhanced with an increase in the sodium tungsten concentration in the plating solution. The performance of the dicing blade reached its peak at a sodium tungstate concentration of 6 g/L. At this point, the diamond content in the Ni–W/diamond dicing blade was higher and more uniformly distributed; the base metal of the dicing blade, a Ni–W alloy, increased in hardness by 47% and in Young's modulus by 26.8% when compared to Ni; the dicing blade's microhardness reached a maximum of 12.4 GPa, an increase of 49.4% over Ni/diamond dicing blades. The average friction coefficient and wear of the dicing blades decreased by 23.4% and 46.5% respectively. The cutting test results also showed that all aspects of the cutting performance of the dicing blade were greatly improved, with the deviation coefficient of Ni–W/diamond dicing blade decreased by 47.9% compared with that of the Ni/diamond dicing blade, the chipping size decreasing by 30.6%, and the radial wear reducing by 31.6%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Advanced materials and composites · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Nano-polishing characteristics in vibration-assisted CMP of single-crystal silicon carbide via molecular dynamics simulations10.1016/j.mssp.2023.107637 ↗
2. Characterizations on the doping of single-crystal silicon carbide10.1016/j.mtphys.2022.100906 ↗
3. Investigation on diamond damaged process during a single-scratch of single crystal silicon carbide
4. MoSe2 and WSSe heterojunction with exceptional power conversion efficiency and photogalvanic effect10.1016/j.mtphys.2023.101317 ↗
5. Adsorption of gas molecules on intrinsic and defective MoSi2N4 monolayer: gas sensing and functionalization
6. The effect of cut depth and distribution for abrasives on wafer surface morphology in diamond wire sawing of PV polycrystalline silicon10.1016/j.mssp.2018.12.004 ↗
7. Experiment and theoretical prediction for surface roughness of PV polycrystalline silicon wafer in electroplated diamond wire sawing10.1016/j.jmapro.2019.11.022 ↗
8. Mechanical strength problem of thin silicon wafers (120 and 140 μm) cut with thinner diamond wires (Si kerf 120→ 100 μm) for photovoltaic use10.1016/j.mssp.2020.105209 ↗
9. Analysis of crack-free surface generation of photovoltaic polysilicon wafer cut by diamond wire saw10.1016/j.solener.2021.01.009 ↗
10. Influence of laser cutting conditions on electrical characteristics of half-size bifacial silicon solar cells10.1016/j.mssp.2019.104747 ↗
11. A review of laser ablation and dicing of Si wafers10.1016/j.precisioneng.2021.10.001 ↗
12. A review on laser drilling and cutting of silicon10.1016/j.jeurceramsoc.2021.04.019 ↗
13. Overview on the development and critical issues of water jet guided laser machining technology10.1016/j.optlastec.2020.106820 ↗
14. Material removal of single crystal 4H-SiC wafers in hybrid laser-waterjet micromachining process10.1016/j.mssp.2018.03.035 ↗
15. Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: comparing with laser machining10.1016/j.mssp.2018.12.037 ↗
16. A novel wafer dicing method using metal-assisted chemical etching
17. Investigation on the fabrication of dicing blades with different sintering methods for machining hard-brittle material wafers10.1177/0954405418802302 ↗
18. Precision machining by dicing blades: a systematic review10.3390/machines11020259 ↗
19. High-speed dicing of SiC wafers with 0.048 mm diamond blades via rolling-slitting10.3390/ma15228083 ↗
20. Preparation and characterization of ultra-thin dicing blades with different bonding properties10.1007/s00170-022-08760-w ↗
21. Structure integrity analysis on nickel–diamond blade in dicing of hard-brittle ceramic die10.1016/j.procir.2022.03.073 ↗
22. Tool life prediction of dicing saw based on PSO-BP neural network10.1007/s00170-022-10466-y ↗
23. Study on precision dicing process of SiC wafer with diamond dicing blades10.1063/10.0005152 ↗
24. Fabrication of silicon carbide microchannels by thin diamond wheel grinding10.1007/s00170-020-06085-0 ↗
25. Precision dicing of hard materials with abrasive blade10.1007/s00170-016-8394-x ↗
26. Investigation of chipping and wear of silicon wafer dicing10.1016/j.jmapro.2014.04.002 ↗
27. High-speed dicing of silicon wafers conducted using ultrathin blades
28. Die singulation technologies for advanced packaging: a critical review
29. Mechanical properties and load bearing capability of nanocrystalline nickel-tungsten multilayered coatings10.1016/j.surfcoat.2020.125472 ↗
30. Effect of diamond particles on the microstructure and composition of pulse plated multilayer Ni-W/diamond composite coatings
31. Synthesis and protective properties of Ni-W alloy strengthened by incorporation of diamond particles10.1016/j.jallcom.2021.160831 ↗
32. Effect of electrodeposition conditions on structure and mechanical properties of Ni-W/diamond composite coatings10.1016/j.surfcoat.2016.11.074 ↗
33. Effect of variations in Ni-W molar ratio on the microstructure, mechanical properties and tribology of electrodeposited Ni-W/diamond composite coatings10.1080/20550324.2023.2229184 ↗
34. Preparation and hardness of pulse electrodeposited Ni–W–diamond composite coatings10.1016/j.surfcoat.2015.06.073 ↗
35. Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings
36. The effect of heat treatment on the microstructure and mechanical properties of electrodeposited nanocrystalline Ni–W/diamond composite coatings10.1016/j.surfcoat.2014.03.064 ↗
37. Preparation and wear resistance of electrodeposited Ni–W/diamond composite coatings10.1016/j.apsusc.2014.04.175 ↗
38. Electrodeposition and properties of NiW films for MEMS application10.1016/j.electacta.2005.03.059 ↗
39. Direct observation of strain-stored grains in electrodeposited nanocrystalline Ni-W alloys by low-angle annular dark field diffraction contrast imaging10.1016/j.scriptamat.2019.03.001 ↗
40. Mechanical properties and microstructures after abnormal grain growth in electrodeposited Ni–W alloys10.1016/j.mtla.2019.100481 ↗
41. Comparison of tensile properties of bulk nanocrystalline Ni–W alloys electrodeposited by direct, pulsed, and pulsed-reverse currents10.2320/matertrans.M2017256 ↗
42. Effect of low-temperature annealing on tensile behavior of electrodeposited bulk nanocrystalline Ni–W alloys10.1016/j.msea.2017.10.071 ↗
43. Development of electrodeposition bath using a substitute of propionic acid for bulk nanocrystalline Ni-W alloys with high ductility10.2320/jinstmet.J2015052 ↗
44. High tensile ductility in electrodeposited bulk nanocrystalline Ni–W alloys10.4028/www.scientific.net/AMR.922.497 ↗
45. Effect of additives on tensile properties of bulk nanocrystalline Ni–W alloys electrodeposited from a sulfamate bath10.1016/j.matlet.2013.02.067 ↗
46. Improvement in tensile ductility of electrodeposited bulk nanocrystalline Ni–W by sulfamate bath using propionic acid10.1016/j.mee.2011.10.018 ↗
47. Direct correlations among the grain size, texture, and indentation behavior of nanocrystalline nickel coatings10.3390/met9020188 ↗
48. Microstructural and microchemical characterisation of the nickel-based thin films prepared by electrodeposition
49. Induced electrodeposition of tungsten with nickel from acidic citrate electrolyte10.1007/s10800-005-9069-8 ↗
50. Structure characterization of nanocrystalline Ni–W alloys obtained by electrodeposition10.1016/j.jallcom.2013.12.085 ↗
51. Experimental investigation of grain boundaries misorientations and nano twinning induced strengthening on addition of silicon carbide in pulse electrodeposited nickel tungsten composite coating10.1016/j.matchar.2016.04.002 ↗
52. A comparison between fine-grained and nanocrystalline electrodeposited Cu–Ni films. Insights on mechanical and corrosion performance10.1016/j.surfcoat.2011.05.047 ↗
53. Influence of particle size and content on the friction and wear behaviors of as-annealed Ni–Mo/diamond composite coatings