Longitudinal-torsional compound ultrasonic vibration end grinding sapphire: A study on surface topography and roughness
Source abstract
Abstract
Owing to excellent physical and optical characteristics, Sapphire has wide applications in detection, military, photoelectric and other industries. Nevertheless, it`s difficult to use the conventional processing methods to process sapphire with high precision and efficiency due to its hardness and brittleness. This study adopted longitudinal-torsional compound ultrasonic vibration end grinding (LTUEG) method to grind sapphire. Firstly, the grinding trajectory equation of single grain under LTUEG was established. Then, combining with the motion state of single grain, the removal mechanism of sapphire under LTUEG was clarified. Finally, a comparative experiment between LTUEG and conventional end grinding (CEG) of sapphire was conducted, and the effects of processing parameters on surface topography and surface roughness were investigated. Results showed that surface roughness declined with grinding speed, enhanced with feed rate and grinding depth, declined first and then went up with amplitude, and the minimum value was 0.522 μm. Compared with CEG, LTUEG could significantly reduce the surface roughness, with a maximum reduction of 20.98 %. LTUEG could reduce the pits size. Meanwhile, when the longitudinal amplitude A L was 0.8 μm, the average pits length and pits depth reached the minimum, which were 33.13 μm and 5.296 μm, respectively. The research found that LTUEG could reduce block spalling, increase the ratio of plastic domain removal as well as improve the surface flatness of workpiece.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Dobrovinskaya · 2009
2. Machining processes for sapphire wafers: a literature review10.1177/2041297510393667 ↗
3. Micromachined pressure sensor based on sapphire for high temperature applications10.1016/j.proeng.2010.09.376 ↗
4. Sapphire shaped crystals for waveguiding, sensing and exposure applications10.1016/j.pcrysgrow.2018.10.002 ↗
5. Effect of hydroxy carboxylates as complexing agent on improving chemical mechanical polishing performance of m-plane sapphire and action mechanism analysis10.1016/j.ceramint.2022.11.132 ↗
6. Effect of sic/sic composites density on nanosecond-laser machining behaviors10.1016/j.ceramint.2022.10.038 ↗
7. Review of ultrasonic vibration-assisted machining in advanced materials10.1016/j.ijmachtools.2020.103594 ↗
8. An investigation of surface roughness in ultrasonic assisted dry grinding of 12cr2ni4a with large diameter grinding wheel10.1007/s12541-018-0110-3 ↗
9. Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for sic ceramics10.1016/j.ceramint.2016.11.066 ↗
10. Effect of intermittent cutting behavior on the ultrasonic vibration-assisted grinding performance of inconel718 nickel-based superalloy10.1016/j.precisioneng.2022.08.006 ↗
11. Study on characteristics of axial ultrasonic assisted grinding of sapphire with different crystal surfaces
12. Ultrasonic vibration-assisted scratch-induced characteristics of c-plane sapphire with a spherical indenter10.1016/j.ijmachtools.2012.07.009 ↗
13. Processing and machining mechanism of ultrasonic vibration-assisted grinding on sapphire10.1016/j.mssp.2022.106470 ↗
14. Analysis on ground surface in ultrasonic face grinding of silicon carbide (sic) ceramic with minor vibration amplitude10.1016/j.ceramint.2021.04.214 ↗
15. A feasibility study on elliptical ultrasonic assisted grinding of sapphire substrate10.1504/IJAT.2010.034050 ↗
16. Experimental investigations of elliptical ultrasonic assisted grinding (euag) of monocrystal sapphire10.1504/IJAT.2011.044502 ↗
17. Experimental study on brittle-ductile transition in elliptical ultrasonic assisted grinding (euag) of monocrystal sapphire using single diamond abrasive grain10.1016/j.ijmachtools.2013.04.004 ↗
18. Investigation on surface formation mechanism in elliptical ultrasonic assisted grinding (euag) of monocrystal sapphire based on fractal analysis method10.1007/s00170-016-8700-7 ↗
19. Study on surface creation law of planar two-dimensional ultrasonic-assisted abrasive belt grinding10.1016/j.jmatprotec.2022.117847 ↗
20. Modelling and analysis of generation mechanism of micro-surface topography during elliptical ultrasonic assisted grinding10.1016/j.jmatprotec.2019.116585 ↗
21. Machinability of sicf/sic ceramic matrix composites using longitudinal-torsional coupled rotary ultrasonic machining
22. Study of ultrasonic machining by longitudinal-torsional vibration for processing brittle materials-observation of machining marks10.1016/j.phpro.2015.08.056 ↗
23. The effect of torsional vibration in longitudinal-torsional coupled ultrasonic vibration-assisted grinding of silicon carbide ceramics10.3390/ma14030688 ↗
24. The material removal mechanism and surface characteristics of ti-6al-4 v alloy processed by longitudinal-torsional ultrasonic-assisted grinding10.1007/s00170-021-08487-0 ↗
25. Feasibility study of longitudinal- torsional-coupled rotary ultrasonic machining of brittle material10.1115/1.4038728 ↗
26. Effect of ultrasonic elliptical vibration assistance on the surface layer defect of m-plane sapphire in microcutting10.1016/j.matdes.2020.108755 ↗
27. Using vibration-assisted grinding to reduce subsurface damage10.1016/S0141-6359(00)00043-X ↗