n-type thermoelectric performance in Co-doped Bi2Te3 polycrystalline alloys
Source abstract
Abstract
Bi 2Te 3 -based alloys are studied as most suitable thermoelectric alloys at room temperature. However, the lower zT values of Se-doped n-type Bi 2Te 3-xSe x than those of p-type Bi xSb 2-xTe 3 still hinder provision of high device performance. In this study, in effort to search for n-type Bi 2Te 3-based alloys other than Se-doped Bi 2Te 3, electrical, thermal, and thermoelectric transport properties of Bi 2-xCo xTe 3 ( x = 0, 0.03, 0.06, 0.09, and 0.12) alloys were examined systematically. By Co doping, power factor of Bi 2Te 3 alloys was increased by 65% to 2.89 mW/mK 2 at 300 K. The enhanced electric transport properties were analyzed by experimental phenomenological parameters deduced from two-band model. It was also found that Co doping reduced bipolar and lattice thermal conductivities. Consequently, zT at 300 K was improved to 0.48 for Bi 1.91Co 0.09Te 3 ( x = 0.09) by 37% compared to that of 0.35 for Bi 2Te 3. The maximum zT of 0.62 was obtained for Bi 1.91Co 0.09Te 3 at 400 K. The two-band model predicts that the z T of Co-doped Bi 2Te 3 can be further improved by optimizing carrier concentration.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Review of current high-ZT thermoelectric materials10.1007/s10853-020-04949-0 ↗
2. A comprehensive review of strategies and approaches for enhancing the performance of thermoelectric module10.3390/en13123142 ↗
3. Thermoelectric generators: a review of applications, Energy Conv
4. Madelung · 2004
5. Nolas · 2001
6. Vapor annealing as a post-processing technique to control carrier concentrations of Bi2Te3 thin films10.1007/s11664-009-1038-2 ↗
7. Experimental realization of a three-dimensional topological insulator, Bi2Te310.1126/science.1173034 ↗
8. High porosity in nanostructured n-type Bi2Te3 obtaining ultralow lattice thermal conductivity10.1021/acsami.9b12079 ↗
9. Fabrication and thermoelectric performance of textured n-type Bi2(Te,Se)3 by spark plasma sintering10.1016/j.mseb.2005.01.002 ↗
10. Improved thermoelectric performance of p-type Bi0.5Sb1.5Te3 through Mn doping at elevated temperature10.1016/j.mtphys.2018.07.002 ↗
11. Improving thermoelectric properties of p-type Bi2Te3-based alloys by spark plasma sintering10.1016/S1002-0071(12)60066-5 ↗
12. Thermoelectric anisotropy of n-type Bi2Te3−xSex prepared by spark plasma sintering10.1039/C5RA04435A ↗
13. Concentration‐dependent excess Cu doping behavior and influence on thermoelectric properties in Bi2Te310.1002/er.7366 ↗
14. Experimental studies on anisotropic thermoelectric properties and structures of n-type Bi2Te2.7Se0.310.1021/nl101156v ↗
15. Spark erosion: a high production rate method for producing Bi0.5Sb1.5Te3 nanoparticles with enhanced thermoelectric performance10.1088/0957-4484/23/41/415604 ↗
16. Simultaneous optimization of electrical and thermal transport properties of Bi0. 5Sb1. 5Te3 thermoelectric alloy by twin boundary engineering10.1016/j.nanoen.2017.05.031 ↗
17. Important role of Cu in suppressing bipolar conduction in Bi-rich (Bi, Sb)2Te310.1016/j.scriptamat.2020.05.039 ↗
18. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
19. Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics10.1126/science.aaa4166 ↗
20. Improved carrier transport properties by I-doping in n-type Cu0.008Bi2Te2.7Se0.3 thermoelectric alloys10.1016/j.scriptamat.2020.04.030 ↗
21. Enhanced thermoelectric properties of nanostructured n-type Bi2Te3 by suppressing Te vacancy through non-equilibrium fast reaction10.1016/j.cej.2019.123513 ↗
22. Cu-incorporation by melt-spinning in n-type Bi2Te2.7Se0.3 alloys for low-temperature power generation10.1016/j.scriptamat.2019.04.006 ↗
23. Point defect engineering of high‐performance bismuth‐telluride‐based thermoelectric materials10.1002/adfm.201400474 ↗
24. Tuning multiscale microstructures to enhance thermoelectric performance of n‐type Bismuth‐Telluride‐based solid solutions10.1002/aenm.201500411 ↗
25. High thermoelectric performance of n-type Bi2Te2.7Se0.3 via nanostructure engineering10.1039/C8TA00525G ↗
26. Advances in n‐type organic thermoelectric materials and devices10.1002/aelm.201800825 ↗
27. Strategies to enhance the conductivity of n-type polymer thermoelectric materials10.1021/acs.chemmater.9b01422 ↗
28. Figure of merit ZT of a thermoelectric device defined from materials properties10.1039/C7EE02007D ↗
29. Precise regulation of carrier concentration in thermoelectric BiSbTe alloys via magnetic doping10.1021/acsami.0c02408 ↗
30. Electrical, thermal, and thermoelectric transport properties of Co-doped n-type Cu0.008Bi2Te2.6Se0.4 polycrystalline alloys10.3365/KJMM.2023.61.3.206 ↗
31. Mills · 1974
32. The crystal structure of Bi2Te3−xSex10.1016/0022-3697(63)90207-5 ↗
33. Crystal structure and epitaxy of Bi2Te3 films grown on Si10.1063/1.4768259 ↗
34. Weighted mobility10.1002/adma.202001537 ↗
35. Thermoelectric performance of films in the bismuth-tellurium and antimony-tellurium systems
36. Ultrahigh power factor and electron mobility in n-type Bi2Te3–x%Cu stabilized under excess Te condition10.1021/acsami.9b10394 ↗
37. Netsou · ACS Nano · 2020 · 14 · 1317210.1021/acsnano.0c04861 ↗
38. Approach to determine the density‐of‐states effective mass with carrier concentration‐dependent Seebeck coefficient10.1002/adfm.202203852 ↗
39. May · 2012
40. Weighted mobility ratio engineering for high-performance Bi–Te-based thermoelectric materials via suppression of minority carrier transport10.1002/adma.202170371 ↗
41. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗