journal article·2022-03

Ammonia-induced surface microstructure reconstruction on ACIGS thin film at room temperature

Yunxiang Zhang, Yongheng Zhang, Xiao Chen, Sijia Wang, Qing Gao, Mengjie Wu, Zhongjie Wang, Jianping Ao, Yun Sun, Wei Liu, Qinfang Zhang

Publisher page

Abstract

The fabrication of Cu(In,Ga)Se 2 (CIGS) solar cells has attracted wide attentions due to its low production cost, high absorption coefficient, and potentially for large-area roll-to-roll process. With the silver doped into CIGS to form (Ag,Cu)(In,Ga)Se 2 (ACIGS), the film quality can be enhanced obviously. However, when the ACIGS film is exposed to air, the sample surface can be oxidized easily and it facilitates the formation of the oxides and hydroxides, especially in the summer, which can deteriorate device performance of solar cells obviously. In this contribution, through ammonia solution, we etch the sample surface and enhance the quality of the heterojunction interface. This treatment not only reduces the oxides and hydroxides on ACIGS surface significantly, but also contributes to the optimization of elements distribution. Furthermore, it is demonstrated that ammonia-treated process can effectively increase the valence band position along with the etching rate of Ga/In–Se > Ag/Cu–Se. The conversion efficiency of the optimum solar cells has a relative increase of about 7.2%. However, high concentration of ammonia solution will etch a lot of Ga–Se and In–Se phases, resulting in many suspension bonds and Ag/Cu–Se phases remaining on the film surface and deteriorating the device performance of solar cells. This work focuses on revealing the etching mechanism of ammonia solution on the ACIGS film surface.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
2. Record efficiency for thin-film polycrystalline solar cells up to 22.9% achieved by Cs-treated Cu(in,Ga)(Se,S)210.1109/JPHOTOV.2018.2882206 ↗
3. Alkali dispersion in (Ag,Cu)(In,Ga)Se2 thin film solar cells—insight from theory and experiment10.1021/acsami.0c20539 ↗
4. CIGS thin film and device performance produced through a variation Ga concentration during three-stage growth process10.1016/j.mssp.2018.07.020 ↗
5. Thin‐film solar cells exceeding 22% solar cell efficiency: an overview on CdTe-, Cu (In, Ga) Se2-, and perovskite-based materials10.1063/1.5061809 ↗
6. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
7. Optimizing the thickness of sputtering-Zn(O, S) buffer layer for all-dry Cd-free CIGS solar cells10.1088/2053-1591/ab200a ↗
8. Effects of ammonia-induced surface modification of Cu(in,Ga)Se2 on high-efficiency Zn(O,S)-Based Cu(in,Ga)Se2 solar cells10.1002/solr.201800254 ↗
9. Heavy alkali treatment of Cu(in,Ga)Se2 solar cells: surface versus bulk effects10.1002/aenm.201903752 ↗
10. Effects of different Cs distribution in the film on the performance of CIGS thin film solar cells10.1016/j.solmat.2020.110917 ↗
11. Improving Ga distribution and efficiency of flexible Cu(In,Ga)(S,Se)2 solar cell using CuGa:Na target route10.1016/j.mssp.2019.02.007 ↗
12. Advanced alkali treatments for high‐efficiency Cu(in,Ga)Se2 solar cells on flexible substrates10.1002/aenm.201900408 ↗
13. Surface passivation of Cu(In,Ga)Se2 using atomic layer deposited Al2O310.1063/1.3675849 ↗
14. Correlation between carrier recombination and valence band offset effect of graded Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2019.110070 ↗
15. Enhancing surface properties for electrodeposited Cu(in,Ga)Se2 films by (NH4)2S solution at room temperature10.1021/acsaem.1c00220 ↗
16. The influence of thermal cracking selenium source temperature on CIGS absorber and device performance in co-evaporation processes
17. Boosting Cu(in,Ga)Se2 thin film growth in low-temperature rapid-deposition processes: an improved design for the single-heating Knudsen cell10.1016/j.eng.2020.01.016 ↗
18. Growth and device properties of ALD deposited ZnO films for CIGS solar cells10.1016/j.mssp.2020.105406 ↗
19. Effect of Ag doping on the performance of Cu2SnS3 thin-film solar cells10.1016/j.solener.2020.03.006 ↗
20. Ga2Se3 treatment of Cu-rich CIGS thin films to fabricate Cu-poor CIGS thin films with large grains and U-shaped Ga distribution10.1016/j.vacuum.2018.02.035 ↗
21. Effect of reduced Cu(InGa)(SeS)2 thickness using three-step H2Se/Ar/H2S reaction of Cu–in–Ga metal precursor10.1109/JPHOTOV.2012.2219501 ↗
22. Ag incorporation in low-temperature grown Cu(In,Ga)Se2 solar cells using Ag precursor layers10.1016/j.solmat.2015.11.028 ↗
23. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
24. Gallium gradients in Cu(In,Ga)Se2 thin-film solar cells10.1002/pip.2485 ↗
25. Understanding the cell-to-module efficiency gap in Cu(In,Ga)(S,Se)2 photovoltaics scale-up10.1038/s41560-018-0177-1 ↗
26. Assessing the roles of Cu- and Ag-deficient layers in chalcopyrite-based solar cells through first principles calculations10.1063/1.5140736 ↗
27. Accelerated publication: diode characteristics in state‐of‐the‐art ZnO/CdS/Cu(In1− xGax)Se2 solar cells10.1002/pip.626 ↗
28. What limits the efficiency of chalcopyrite solar cells?10.1016/j.solmat.2010.12.014 ↗
29. Silver surface treatment of Cu(in,Ga)Se2 (CIGS) thin film: a new passivation process for the CdS/CIGS heterojunction interface10.1002/solr.202000290 ↗