journal article·2024-01

Fracture probability of PV mono-Si wafers in diamond wire slicing due to coupling of capillary adhesion bending stress and sawing stress

Dameng Cheng, Yufei Gao

Publisher page

Abstract

The market share of monocrystalline silicon (mono-Si) solar cells is increasing year by year due to high efficiency. The first process of producing silicon-based solar cell substrate is to saw silicon brick into wafers with a diamond wire saw. In order to reduce the production cost, the size and thickness of silicon wafers are becoming larger and thinner, and the width of the sawing kerf is becoming smaller and smaller. During the slicing process of the diamond wire saw, the cooling liquid will create a liquid layer between adjacent silicon wafers due to the capillary phenomenon. When the bending stiffness of silicon wafers is not enough to resist the capillary force generated by the liquid layer, the silicon wafers will adhere together and bend to produce bending stress. The coupling effect of bending stress and sawing stress affect the fracture probability of silicon wafers. In this paper, the coupling stresses of bending stress, sawing thermal stress and sawing mechanical stress of the silicon wafer during the sawing process were calculated by the finite element analysis method. The influences of the wafer size characteristics, the kerf width and the process parameters on coupling stress were analyzed. Based on the Weibull probability function, the fracture probability of wafers under maximum coupling stress was predicted. The results show that the probability of wafer fracture increases with the increase in size and the reduction of thickness, and decreases with the decrease in kerf width. The increase in diamond wire speed and feed speed will increase the wafer fracture probability. The research results provide theoretical guidance for understanding the wafers fracture in the sawing process, and provide a theoretical basis for the process optimization of sawing large-size and ultra-thin wafers.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Performance enhancement of solar photovoltaic cells using effective cooling methods: a review10.1016/j.rser.2016.06.024 ↗
2. Finite element analysis of the clamping stress of photovoltaic silicon brick in diamond wire sawing10.1016/j.mssp.2022.106732 ↗
3. Investment and employment from large-scale photovoltaics up to 205010.1007/s10663-012-9185-8 ↗
4. Investigation of optimal water utilization for water spray cooled photovoltaic panel: a three-dimensional computational study
5. Experiment and theoretical prediction for subsurface microcracks and damage depth of multi-crystalline silicon wafer in diamond wire sawing10.1016/j.engfracmech.2022.108391 ↗
6. Experimental study on slicing photovoltaic polycrystalline silicon with diamond wire saw10.1016/j.mssp.2019.104779 ↗
7. Optical management of spacer layer of high-performance four-terminal perovskite/silicon tandem solar cells10.1016/j.solener.2021.09.018 ↗
8. 2022
9. 2020
10. Wire sawing technology: a state-of-the-art review10.1016/j.precisioneng.2015.08.008 ↗
11. Diamond wire sawing of solar silicon wafers: a sustainable manufacturing alternative to loose abrasive slurry sawing10.1016/j.promfg.2018.02.156 ↗
12. A comprehensive study on slicing processes optimization of silicon ingot for photovoltaic applications10.1016/j.solener.2017.12.040 ↗
13. Prediction of sawing force for single-crystal silicon carbide with fixed abrasive diamond wire saw10.1016/j.mssp.2017.01.014 ↗
14. Depth of cut for single abrasive and cutting force in resin bonded diamond wire sawing10.1007/s00170-016-8896-6 ↗
15. Analytical force modeling of fixed abrasive diamond wire saw machining with application to sic monocrystal wafer processing10.1115/1.4034792 ↗
16. Effect of wear of diamond wire on surface morphology, roughness and subsurface damage of silicon wafers10.1016/j.wear.2016.07.009 ↗
17. Analysis of sawing characteristics of fine diamond wire slicing multi-crystalline silicon10.1016/j.diamond.2021.108708 ↗
18. Study on diamond wire wear, surface quality, and subsurface damage during multi-wire slicing of c-plane sapphire wafer10.1007/s00170-018-2656-8 ↗
19. Study on a novel fixed and free abrasive combined wire sawing multi-crystalline silicon wafers for wet acid texturization10.1016/j.solener.2021.03.080 ↗
20. Analysis of crack-free surface generation of photovoltaic polysilicon wafer cut by diamond wire saw10.1016/j.solener.2021.01.009 ↗
21. The impact of saw mark direction on the fracture strength of thin (120 μm) monocrystalline silicon wafers for photovoltaic cells10.7567/JJAP.57.095501 ↗
22. Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon10.1016/j.precisioneng.2017.04.011 ↗
23. A cost roadmap for silicon heterojunction solar cells10.1016/j.solmat.2015.12.026 ↗
24. Fracture strength of photovoltaic silicon wafers cut by diamond wire saw based on half-penny crack system10.1016/j.engfracmech.2021.107717 ↗
25. Comparative analysis of mechanical strength of diamond-sawn silicon wafers depending on saw mark orientation, crystalline nature and thickness10.1016/j.solmat.2019.110068 ↗
26. Stress and reliability analysis of electronic packages with ultra-thin chips10.1115/1.1535932 ↗
27. The chemo-mechanical effect of cutting fluid on material removal in diamond scribing of silicon10.1063/1.4991536 ↗
28. Elastocapillarity: when surface tension deforms elastic solids10.1146/annurev-fluid-122316-050130 ↗
29. Capillary bridges between soft substrates10.1103/PhysRevLett.112.066102 ↗
30. Engineering hierarchical nanostructures by elastocapillary self-assembly10.1002/anie.201205944 ↗
31. Adhesive elastocapillary force on a cantilever beam10.1039/C9SM00217K ↗
32. Evaluation of capillary-induced deformation of thin plates due to liquid column formation10.1063/1.4816662 ↗
33. Effect of capillary adhesion on fracture of photovoltaic silicon wafers during diamond wire slicing10.1016/j.solener.2022.04.029 ↗
34. Finite element analysis on processing stress of polysilicon cut by diamond multi-wire saw10.1016/j.mssp.2021.105860 ↗
35. Coupling stress caused by thermal and slicing force in KDP crystal slicing with fixed abrasive wire saw10.1007/s00170-018-1893-1 ↗
36. A finite element analysis of sawing stress in fixed-abrasive wire saw slicing KDP crystal10.1007/s00170-016-9916-2 ↗
37. Study on the subsurface microcrack damage depth in electroplated diamond wire saw slicing SiC crystal10.1016/j.ceramint.2018.09.088 ↗
38. Durability studies of micro/nanoelectromechanical systems materials, coatings and lubricants at high sliding velocities (up to 10 mm/s) using a modified atomic force microscope10.1116/1.1843821 ↗
39. A finite element analysis of temperature variation in silicon wafers during wiresaw slicing10.1016/j.ijmachtools.2007.07.009 ↗
40. Prediction of warping in silicon wafer slicing with wire-saw machine
41. Mechanical strength problem of thin silicon wafers (120 and 140 μm) cut with thinner diamond wire (Si kerf 120-100 μm) for photovoltaic use10.1016/j.mssp.2020.105209 ↗
42. Temperature distributions and thermal deformations of mirror substrates in laser resonators10.1364/AO.40.004824 ↗
43. Jiao · 2014
44. Carton · 2020
45. Variation of silicon wafer strength and edge chipping induced by residual stresses at the brick bonding interface
46. Adhesion: elastocapillary coalescence in wet hair10.1038/432690a ↗
47. Theoretical research on temperature in diamond wire sawing
48. Experimental investigation of temperatures in diamond wire sawing granite10.4028/www.scientific.net/KEM.404.185 ↗