On the role of complexing agents in co-electrodeposition of SnAg alloy with uniform composition
Source abstract
Abstract
This study investigated the effect of different Ag complexing agents on the co-electrodeposition of SnAg alloys. The reduction onset potentials of Ag and Sn electrodeposition solutions were determined using electrochemical measurements in the presence of the complexing agents thiourea (TU), 1-(2-dimethylaminoethyl)-5-mercapto-1,2,3,4-tetrazole (DMT), and 4,4′-thiodiphenol (TDP). TDP was found to be the most effective at decreasing onset reduction potential compared to TU and DMT, leading to a more uniform deposition process and smoother surface morphology of the SnAg bump. The molecular structures and energy levels of the complexing agents were analyzed to gain insights into their complexation behaviors. The results suggest that TDP has a higher reactivity towards metal ions and is more likely to form stable complexes with Ag ions . By elucidating the intricate interplay between complexing agents and the electrodeposition process, this research contributes to the advancement of knowledge in this field and holds promising implications for optimizing the fabrication of SnAg alloys in various technological applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Solder joint fatigue models: review and applicability to chip scale packages10.1016/S0026-2714(99)00061-X ↗
2. Design and optimization of thermo-mechanical reliability in wafer level packaging10.1016/j.microrel.2009.11.010 ↗
3. Complexation behavior and Co-electrodeposition mechanism of Au-Sn alloy in highly stable non-cyanide bath10.1149/2.0721803jes ↗
4. Six cases of reliability study of Pb-free solder joints in electronic packaging technology10.1016/S0927-796X(02)00007-4 ↗
5. Electrochemical processing technologies in chip fabrication: challenges and opportunities10.1016/S0013-4686(03)00363-3 ↗
6. Electrodeposition for the synthesis of microsystems10.1088/0960-1317/10/2/301 ↗
7. Growth behavior of tin whisker on SnAg microbump under compressive stress10.1016/j.scriptamat.2018.01.014 ↗
8. Effects of the degradation of methane sulfonic acid electrolyte on the collapse failure of Sn-Ag alloy solders for flip-chip interconnections10.1039/C7RA02193C ↗
9. Evaluation of lead-free SnAg solder ball deposition and reflow processes for flip chip applications10.1016/j.mee.2005.07.072 ↗
10. Functions of 2-butyne-1,4-diol in the process of tin-silver alloy electrodeposition from the acidic sulfate solution
11. Electrodeposition of near-eutectic SnAg solders for wafer-level packaging10.1149/1.1596163 ↗
12. Effect of polyethylene glycol additives on pulse electroplating of SnAg solder10.1007/s11664-007-0290-6 ↗
13. Cyclic voltammetry growth and characterization of Sn-Ag alloys of different nanomorphologies and compositions for efficient hydrogen evolution in alkaline solutions10.1039/C9RA03503F ↗
14. Electrodeposition of eutectic Sn96.5Ag3.5 films from iodide-pyrophosphate solution10.1016/j.electacta.2011.03.050 ↗
15. One-step electrodeposition of CuAlGaSe2 thin films using triethanolamine as a complexing agent10.1016/j.tsf.2020.138351 ↗
16. Fabrication of CdS/CdTe heterostructures by chemical synthesis using a p-type CdTe film grown by electrodeposition employing EDTA as strong complexing agent10.1007/s11664-019-07114-9 ↗
17. Potentiometric study of silver complexes with thiourea in acid media10.1080/00958970801947454 ↗
18. Gold and silver complexes with thiotriazoles and thiotetrazoles10.1080/10426507.2010.549020 ↗
19. Use of ionic liquid in simultaneous microextraction procedure for determination of gold and silver by ETAAS10.1016/j.microc.2012.03.005 ↗
20. Jo · 2022
21. General atomic and molecular electronic structure system10.1002/jcc.540141112 ↗
22. MacMolPlt: a graphical user interface for GAMESS10.1016/S1093-3263(99)00002-9 ↗
23. Electrodeposition of Sn powders with pyramid chain and dendrite structures in deep eutectic solvent: roles of current density and SnCl2 concentration10.1007/s10008-020-04894-7 ↗
24. Electrodeposition of Cu-Sn alloys from a methanesulfonic acid electrolyte containing benzyl alcohol10.1016/j.electacta.2017.10.027 ↗
25. Electrodeposition of tin-rich Cu-Sn alloys from a methanesulfonic acid electrolyte10.1016/j.electacta.2012.12.053 ↗
26. The influence of a perfluorinated cationic surfactant on the electrodeposition of tin from a methanesulfonic acid bath10.1016/j.jelechem.2007.11.031 ↗
27. Electrodeposition and characterization of eutectic Sn-Ag alloy as solder bumps for flip-chip interconnection10.1149/1.3194780 ↗
28. Toward a better understanding of the effect of Cu electroplating process parameters on Cu3Sn voiding10.1007/s11664-011-1764-0 ↗
29. Novel sodium sulfonate-functionalized poly(ether ether ketone)s derived from 4,4 '-thiodiphenol10.1016/S0032-3861(00)00748-5 ↗
30. [Tl-2(mu-Htdp)(2)(mu-H2O)](n) (H(2)tdp=4,4 '-thiodiphenol) - a one-dimensional thallium(I) coordination polymer with a large tetranuclear metallacycle: thermal, emission and structural studies10.1016/j.inoche.2006.10.014 ↗
31. Microstructure of Sn-Ag alloys electrodeposited from pyrophosphate-iodide solutions10.2320/matertrans1989.39.439 ↗
32. The effects of electroplating parameters on the composition and morphology of Sn-Ag solder10.1007/s11664-004-0087-9 ↗
33. Sn-Ag solder bump formation for flip-chip bonding by electroplating10.1149/1.1606687 ↗
34. Reactive diffusion between Ag-Au alloys and Sn at solid-state temperatures10.1016/j.msea.2006.04.111 ↗
35. Nucleation and growth of Ag3Sn in Sn-Ag and Sn-Ag-Cu solder alloys
36. Supplemental literature review of binary phase diagrams: Ag-Ho, Ag-Tb, Ag-Y, Cd-Na, Ce-Sn, Co-Dy, Cu-Dy, Cu-Sn, Ir-Pt, Mg-Pb, Mo-Ni, and Sc-Y10.1007/s11669-014-0284-z ↗
37. Phase diagram prediction and particle characterisation of Sn-Ag nano alloy for low melting point lead-free solders10.2298/JMMB120121032S ↗
38. Thermal stability and sulfidizing resistance of high reflective multilayered Sn/Ag3Sn and Sn/Ag films electrodeposited on Cu alloy sheets10.1016/j.electacta.2016.07.006 ↗
39. Multiple reflow study of ball grid array (BGA) solder joints on Au/Ni metallization10.1007/s10853-006-1234-x ↗
40. Investigations on thiourea content in ternary Sn-Ag-Cu bath using electrochemical studies10.1007/s10800-011-0370-4 ↗
41. Effect of surfactant on the bath stability and electrodeposition of Sn-Ag-Cu films10.1016/j.surfcoat.2007.11.002 ↗