journal article·2023-10

AZO/Ag/AZO composite film with high transmittance based on an ultrathin continuous Ag layer obtained via micro oxidation

Yuhang Zhang, Luoshu Wang, Zhenbo Geng, Dequan Zhang, Danping Wang, Juncheng Liu, Qingguo Wang

Publisher page

Abstract

O 2 was introduced at the initial stage of Ag layer sputtering to oxidize it slightly to get an ultrathin continuous Ag layer, and an AZO/Ag/AZO (or called AZO/AgO x /Ag/AZO) composite film with high transmittance and conductivity was prepared. The results showed that the O/Ag molar ratio x of AgO x layer increased from 0.02 to 0.2 as the O 2 flow ratio increased from 0% to 15%, the lattice mismatch between AZO layer and Ag layer decreased. Both Ag layer crystallization quality and surface quality improved, a continuous ultrathin Ag layer was obtained, of which thickness was less than 10 nm. And the visible transmittance (380–780 nm) of AZO/Ag/AZO composite film improved a lot, while its sheet resistance increased a little. When the O 2 flow ratio was 5%, its average transmittance reached 80.95%, its sheet resistance was 12.21 Ω/sq, and the Figure-of-Merit (FOM) got the maximum 9.90 mΩ −1.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Reconstructed transparent conductive layers of fluorine doped tin oxide for greatly weakened hysteresis and improved efficiency of perovskite solar cells10.1039/C9CC08102J ↗
2. Silver and copper nanowire films as cost-effective and robust transparent electrode in energy harvesting through photovoltaic: a review
3. Solar heat gain coefficient and heat transmission coefficient of Al-doped ZnO thin-film coated low-emissivity glass10.2109/jcersj2.19217 ↗
4. Optimization of physical properties of sputtered silver films by change of deposition power for low emissivity applications10.1016/j.jallcom.2020.157073 ↗
5. A new chromic (TouchChromic) thin film10.1016/j.actamat.2016.09.019 ↗
6. Highly stretchable, electrically conductive textiles fabricated from silver nanowires and cupro fabrics using a simple dipping-drying method10.1007/s12274-014-0649-y ↗
7. Intrinsic electromagnetic radiation shielding/absorbing characteristics of polyaniline-coated transparent thin films10.1016/j.synthmet.2010.06.027 ↗
8. Flexible and transparent ferroferric oxide-modified silver nanowire film for efficient electromagnetic interference shielding10.1021/acsami.9b17513 ↗
9. Highly stable and transparent conductive film realized by semi-embedded polydopamine/silver nanowire network
10. Flexible and transparent graphene/silver-nanowires composite film for high electromagnetic interference shielding effectiveness10.1016/j.scib.2019.03.028 ↗
11. Electromagnetic shielding by MXene-graphene-PVDF composite with hydrophobic, lightweight and flexible graphene coated fabric10.3390/ma11101803 ↗
12. Fabrication of nonwetting flexible free-standing MXene-carbon fabric for electromagnetic shielding in s-band region10.1002/bkcs.11616 ↗
13. Ag paste-based nanomesh electrodes for large-area touch screen panels10.1088/1361-6439/aa8a98 ↗
14. Pattern randomization: an efficient way to design high-performance metallic meshes with uniform stray light for EMI shielding10.1364/OE.386921 ↗
15. Fabrication of uniformly growing graphene films via the dip-coating method10.4028/www.scientific.net/AMM.320.185 ↗
16. Rapid preparation of conductive transparent films via solution printing of graphene precursor10.1016/j.tsf.2018.05.005 ↗
17. Electrical and optical characterization of indium tin oxide (ITO) films for low resistance transparent electrode10.4028/www.scientific.net/MSF.449-452.1001 ↗
18. Experimental analysis for electromagnetic scattering characteristics of aluminum-doped zinc oxide (AZO) coated glass10.1016/j.ijleo.2017.10.122 ↗
19. Seed-layer-free growth of ultra-thin Ag transparent conductive films imparts flexibility to polymer solar cells10.1016/j.solmat.2018.04.002 ↗
20. Optimizing the morphology of metal multilayer films for indium tin oxide (ITO)-free inverted organic solar cells10.1063/1.3100039 ↗
21. Ultra-smooth and thermally-stable Ag-based thin films with subnanometer roughness by aluminum doping10.1021/nn503577c ↗
22. Investigation of material properties and thermal stabilities of magnetron-sputter-deposited ZnO:Al/Ag/ZnO:Al transparent conductive coatings for thin-film solar cell applications
23. AZO/Ag/AZO multilayers electrodes evaluated using a photonic flux density figure of merit for solar cells applications10.1016/j.spmi.2018.03.018 ↗
24. Improvement of the conductivity and transmittance of AZO/Ag/AZO composite film via lattice oxygen ratio regulation10.1016/j.optmat.2021.111672 ↗
25. Wu · 2013
26. Optimum structure of metal oxide under-layer used in Ag-based multilayer10.1016/j.vacuum.2008.04.025 ↗
27. Ultrathin silver film electrodes with ultralow optical and electrical losses for flexible organic photovoltaics10.1021/acsami.8b08578 ↗
28. Chen · 2003
29. High performance flexible transparent conductive electrode based on ZnO/AgOx/ZnO multilayer10.1016/j.tsf.2019.137759 ↗
30. Growth of ultrathin Ag films on TaNx layer and their optical properties10.1007/s13391-013-2138-y ↗
31. Tang · 2006
32. New Figure of merit for transparent conductors10.1063/1.323240 ↗