Cooling rate-dependent microstructure and electrical properties of BCZT ceramics
Source abstract
Abstract
Ba 0.85Ca 0.15Zr 0.1Ti 0.9O 3 (BCZT) ceramics were successfully synthesized by controlling the cooling rate during the sintering, and their microstructure and electrical properties were systematically analyzed. The results indicate that all BCZT ceramics show the coexistence of orthorhombic (O) and tetragonal (T) phases near room temperature. As a result of the interaction of grain size and densification, the remnant polarization, dielectric constant, and piezoelectric constant increase firstly and then decrease with the rise of cooling rate. The piezoelectric responses of BCZT ceramics are improved by optimizing the cooling process. BCZT ceramics prepared by the cooling rate with 4 °C/min have high dielectric constant ( ε m = 23879), high remnant polarization (2 P r = 30.26 μC/cm 2), and excellent piezoelectric responses ( d 33 = 551.1 pC/N and d 33 * = 630 pm/V), which is due to the coexistence of O-T phase, larger grain size, and superior densification. These findings demonstrate that excellent piezoelectric properties for BCZT ceramics can be achieved by optimizing the cooling rate during the sintering process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Giant piezoelectric coefficients in relaxor piezoelectric ceramic PNN-PZT for vibration energy harvesting10.1002/adfm.201706895 ↗
2. Enhanced insulating and piezoelectric properties of 0.7BiFeO3–0.3BaTiO3 lead-free ceramics by optimizing calcination temperature: analysis of Bi3+ volatilization and phase structures10.1039/C8TC00329G ↗
3. Progress in high-strain perovskite piezoelectric ceramics10.1016/j.mser.2018.08.001 ↗
4. The propagation of stress wave in the PZT-5H composite target and the influence of load resistance on the electrical output under the strong shock loading10.1109/TPS.2017.2783887 ↗
5. Piezoelectric and electrical properties of PZT-PSN thin film ceramics for MEMS applications10.1016/S1369-8001(02)00091-4 ↗
6. Solid-state synthesis of modified (Bi0.5Na0.5)TiO3 piezoelectric nanocrystalline ceramics and evaluating their properties10.1016/j.mssp.2014.05.061 ↗
7. High performance flexible piezoelectric nanogenerators based on BaTiO3 nanofibers in different alignment modes10.1021/acsami.6b02177 ↗
8. Preparation of PA11/BaTiO3 nanocomposite powders with improved processability, dielectric and piezoelectric properties for use in selective laser sintering10.1016/j.matdes.2017.06.012 ↗
9. Enhanced piezoelectric response and high-temperature sensitivity by site-selected doping of BiFeO3-BaTiO3 ceramics10.1016/j.jeurceramsoc.2017.10.023 ↗
10. Enhanced piezoelectric properties and strain response in <001> textured BNT-BKT-BT ceramics10.1016/j.matdes.2017.10.003 ↗
11. Dielectric and piezoelectric properties of 2-2 connectivity lead-free piezoelectric ceramic Bi0.5Na0.5TiO3/Portland cement composites10.1016/j.ceramint.2018.08.110 ↗
12. Structural evolution of thermal sprayed bismuth sodium titanate piezoelectric ceramic coatings10.1111/jace.16135 ↗
13. Enhanced piezoelectric properties in potassium-sodium niobate-based ternary ceramics10.1016/j.matdes.2016.07.026 ↗
14. Design on improving piezoelectric strain and temperature stability of KNN‐based ceramics10.1111/jace.16136 ↗
15. Ultrahigh piezoelectric properties in textured (K,Na)NbO3‐based lead‐free ceramics
16. Large piezoelectric effect in Pb-free ceramics10.1103/PhysRevLett.103.257602 ↗
17. Enhanced piezoelectric response of (Ba,Ca)(Ti,Zr)O3 ceramics by super large grain size and construction of phase boundary10.1016/j.jallcom.2019.04.247 ↗
18. The complex evaluation of functional properties of nearly dense BCZT ceramics and their dependence on the grain size10.1016/j.ceramint.2018.09.169 ↗
19. Effect of porosity on the ferroelectric and piezoelectric properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 piezoelectric ceramics10.1016/j.scriptamat.2017.10.022 ↗
20. High-performance La-doped BCZT thin film capacitors on LaNiO3/Pt composite bottom electrodes with ultra-high efficiency and high thermal stability10.1016/j.ceramint.2019.03.051 ↗
21. Microstructure and electrical properties in Zn-doped Ba0.85Ca0.15Ti0.90Zr0.10O3 piezoelectric ceramics10.1016/j.jallcom.2015.02.093 ↗
22. Y2O3 doped Ba0.9Ca0.1Ti0.9Sn0.1O3 ceramics with improved piezoelectric properties10.1016/j.jeurceramsoc.2017.10.045 ↗
23. Upconversion photoluminescence modulation by electric field poling in Er3+ doped (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 piezoelectric ceramics10.1016/j.jallcom.2019.04.262 ↗
24. Enhancing piezoelectric properties of BCZT ceramics by Sr and Sn co-doping10.1016/j.jallcom.2015.04.029 ↗
25. Enhanced ferroelectric and piezoelectric responses of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramics by Tm3+ amphoteric substitution10.1016/j.matchemphys.2020.123242 ↗
26. Electric fatigue of BCZT ceramics sintered in different atmospheres10.1007/s00339-019-3062-2 ↗
27. Effects of oxygen partial pressure on the electrical properties and phase transitions in (Ba,Ca)(Ti,Zr)O3 ceramics10.1007/s10853-020-04771-8 ↗
28. Synergistic effect of grain size and phase boundary on energy storage performance and electric properties of BCZT ceramics10.1007/s10854-020-03446-z ↗
29. Correlation between the microstructure and electrical properties in high-performance (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 lead‐free piezoelectric ceramics10.1111/j.1551-2916.2012.05146.x ↗
30. High piezoelectric d33 coefficient of lead-free (Ba0.93Ca0.07)(Ti0.95Zr0.05)O3 ceramics sintered at optimal temperature10.1016/j.mseb.2010.09.003 ↗
31. Sintering temperature-induced electrical properties of (Ba0.90Ca0.10)(Ti0.85Zr0.15)O3 lead-free ceramics10.1016/j.materresbull.2012.01.032 ↗
32. Highly textured Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics prepared by reactive template grain growth process10.1016/j.matlet.2015.11.118 ↗
33. Exceptionally high piezoelectric coefficient and low strain hysteresis in grain-oriented (Ba,Ca)(Ti,Zr)O3 through integrating crystallographic texture and domain engineering10.1021/acsami.7b08160 ↗
34. Enhanced electromechanical properties in <00l>-textured (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 lead-free piezoceramics10.1016/j.ceramint.2015.10.139 ↗
35. Grain and the concomitant ferroelectric domain size dependent physical properties of Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics fabricated using powders derived from oxalate precursor route10.1063/1.4900494 ↗
36. Correlation of grain size, phase transition and piezoelectric properties in Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics10.1007/s10854-015-3063-7 ↗
37. Synergistic effect of ultrasonic melt treatment and fast cooling on the refinement of primary Si in a hypereutectic Al–Si alloy10.1016/j.actamat.2017.10.039 ↗
38. Strengthening or weakening texture intensity of Zr alloy by modifying cooling rates from α+β region10.1016/j.matchemphys.2018.04.044 ↗
39. Liquid-liquid phase separation and solidification behavior of Al55Bi36Cu9 monotectic alloy with different cooling rates10.1016/j.rinp.2018.01.056 ↗
40. Effects of cooling rate on the atomic structure of Cu64Zr36 binary metallic glass10.1016/j.commatsci.2017.09.026 ↗
41. Heating rate effect on dielectric, ferroelectric and piezoelectric properties of Bi0.45La0.05Na0.40K0.10Ti0.98Zr0.02O3 Pb-free piezoelectric ceramic for actuator applications10.1080/00150193.2019.1653080 ↗
42. (Zr,Ti)O3 lead-free piezoelectric ceramics—The critical role of processing on properties10.1016/j.jeurceramsoc.2015.05.010 ↗
43. Photoluminescence and optical temperature sensing in Sm3+-doped Ba0.85Ca0.15Ti0.90Zr0.10O3 lead-free ceramics10.1016/j.ceramint.2018.09.212 ↗
44. Very-low temperature synthesis of pure and crystalline lead-free Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramic10.1016/j.ceramint.2018.03.022 ↗
45. Effect of annealing temperature on structural and electrical properties of BCZT ceramics prepared by plasma activated sintering10.1016/j.jallcom.2017.09.310 ↗
46. A comparative study of structural and electrical properties in lead-free BCZT ceramics: influence of the synthesis method10.1016/j.actamat.2018.05.029 ↗
47. Enhanced relaxor ferroelectric behavior of BCZT lead-free ceramics prepared by hydrothermal method10.1016/j.matlet.2014.08.138 ↗
48. Effect of Gadolinium on the structural and dielectric properties of BCZT ceramics10.1080/01411594.2020.1711905 ↗
49. Effects of Mn doping on structural and dielectric properties of sol–gel-derived (Ba0.835Ca0.165)(Zr0.09Ti0.91)O3 thin films10.1016/j.tsf.2012.03.132 ↗
50. Effect of external fields on the switching current in PZT ferroelectric ceramics10.1016/j.ssc.2009.09.042 ↗
51. Domain switching contribution to the ferroelectric, fatigue and piezoelectric properties of lead-free Bi0.5(Na0.85K0.15)0.5TiO3 films10.1039/C6RA04262G ↗
52. Impedance spectroscopy analysis of the diffuse phase transition in lead-free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 ceramic elaborated by sol-gel method10.1016/j.spmi.2018.03.009 ↗
53. Dielectric and impedance spectroscopic studies of lead-free barium‐calcium‐zirconium‐titanium oxide ceramics10.1016/j.ceramint.2015.05.107 ↗
54. Rietveld refinement and impedance spectroscopy of calcium titanate10.1016/j.cap.2012.03.034 ↗
55. Defect chemistry and relaxation processes: effect of an amphoteric substituent in lead-free BCZT ceramics10.1039/C6CP06244J ↗
56. Dielectric properties and impedance spectroscopy of MnCO3‐modified (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 lead‐free ceramics10.1111/jace.13481 ↗
57. Dielectric behavior and impedance spectroscopy of lead-free Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics with B2O3-Al2O3-SiO2 glass-ceramics addition for enhanced energy storage10.1016/j.jallcom.2017.05.158 ↗
58. Dc electrical degradation of perovskite‐type titanates: I, ceramics10.1111/j.1151-2916.1990.tb09809.x ↗
59. Frequency-temperature response of ferroelectromagnetic Pb(Fe1∕2Nb1∕2)O3 ceramics obtained by different precursors. Part I. Structural and thermo-electrical characterization
60. Electrostrictive effect in ferroelectrics: an alternative approach to improve piezoelectricity10.1063/1.4861260 ↗
61. Giant electric-field-induced strains in lead-free ceramics for actuator applications–status and perspective10.1007/s10832-012-9742-3 ↗
62. High dielectric constant and frozen macroscopic polarization in dense nanocrystalline BaTiO3 ceramics10.1103/PhysRevB.73.064114 ↗
63. Enhanced temperature stability in Tb-doped (Ba0.99Ca0.01)(Ti0.98Zr0.02)O3 lead free ceramics10.1016/j.ceramint.2014.10.071 ↗
64. The (1-x)Ba0.85Ca0.15Zr0.08Ti0.92-xGe lead-free ceramics with high piezoelectric activity and ultrahigh dielectric constant10.1016/j.ceramint.2018.09.185 ↗
65. Low sintering temperature and high piezoelectric properties of Li-doped (Ba,Ca)(Ti,Zr)O3 lead-free ceramics10.1016/j.jallcom.2015.01.088 ↗
66. Enhanced Curie temperature and piezoelectric properties of (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3 lead-free ceramics after the addition of LiTaO310.1016/j.materresbull.2018.05.036 ↗