journal article·2021-09

Simulation analysis on cutting forces based on surface topography of fixed abrasive wire saw

Aofei Tang, Weichao Guo, Zhenyi Yuan, Guigeng Yang, Shaoxin Hu

Publisher page

Abstract

Abstract Similar to grinding, a large number of diamond abrasive particles are used on the wire saw surface to remove materials by interaction with the workpiece. Therefore, the surface morphological characteristics of the wire saw, such as particle size and cutting edge height, have important effects on cutting performance of the wire saw. In terms of the complex diversity of the geometric characteristics and the randomness of the spatial position of the abrasive particles on the wire saw, the irregular polyhedron generated by the random space plane sphere method is used to simplify the abrasive particles and the space coordinates of the abrasive centre are created by random algorithm. As a result, a more realistic 3D model of the wire saw surface is constructed. A finite element method was employed to establish a cutting force simulation model of the wire saw with multiple abrasive particles for hard and brittle materials cutting processing, and the influence of feed rate and wire saw speed on cutting force was analysed; Based on the contact arc length, the cutting force model of multiple abrasive particles is extended to the macro level of wire saw cutting, and the reliability of the proposed model is verified by 4H-SiC cutting experiments. The established finite element model for microscopic simulation of the cutting process lays a foundation for cutting force prediction, tool parameter optimization and further research on wire saw cutting mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. A review on ductile mode cutting of brittle materials10.1007/s11465-018-0504-z ↗
2. Machining processes for sapphire wafers: a literature review10.1177/2041297510393667 ↗
3. Evaluation of fixed abrasive diamond wire sawing induced s ubsurface damage of solar silicon wafers10.1016/j.jmatprotec.2019.116267 ↗
4. Coupling stress caused by thermal and slicing force in KDP crystal slicing with fixed abrasive wire saw10.1007/s00170-018-1893-1 ↗
5. Basic mechanisms and models of multi-wire sawing10.1002/adem.200400578 ↗
6. Microscopic contact pressure and material removal modeling in rail grinding using abrasive belt10.1177/0954405420932419 ↗
7. Characteristic assessment and analysis of residual stresses generated by dry belt finishing on hard turned AISI5210010.1016/j.jmapro.2020.09.039 ↗
8. Experimental and simulation research on residual stress for abrasive belt rail grinding
9. Investigation of belt-finishing effect on the residual stress field through repeated scratching on rough hard-turned surface
10. Depth of cut per abrasive in fixed diamond wire sawing10.1007/s00170-015-7089-z ↗
11. Generation of diamond wire sliced wafer surface based on the distribution of diamond grits10.1007/s12541-014-0401-2 ↗
12. The effect of cut depth and distribution for abrasives on wafer surface morphology in diamond wire sawing of PV polycrystalline silicon10.1016/j.mssp.2018.12.004 ↗
13. Measurement and evaluation of full circumferential three-dimensional surface topography of diamond wire saw based on contour method10.3901/JME.2019.02.107 ↗
14. Sawing stress of SiC single crystal with void defect in diamond wire saw slicing10.1007/s00170-019-03579-4 ↗
15. Finite element analysis of multi-wire saw silicon rods with consolidated abrasive diamonds10.1007/s00170-016-9321-x ↗
16. Wire vibration modeling and experimental analysis for wire saw machining10.1115/1.4045059 ↗
17. On the mechanics of the grinding process - Part I. Stochastic nature of the grinding process10.1016/S0890-6955(03)00186-X ↗
18. Levelling mechanism and experiment of micro-adjusting platform in micro-cutting system
19. Research of grinding wheel modeling and measuring based on the spherical coordinate and optical density10.3901/JME.2016.21.190 ↗
20. Canavos · 1984