journal article·2020-03

Electrochemically and chemically deposited polycrystalline CdSe electrodes with high photoelectrochemical performance by recycling from waste films

Ahed Zyoud, Sohaib Abu Alrob, Tae Woo Kim, Hyun-Jong Choi, Mohammed H.S. Helal, Heba Bsharat, Hikmat S. Hilal

Publisher page

Abstract

Abstract Waste CdSe film electrodes can be recycled into useful films without sacrificing their photoelectrochemical performance. Cd2+ aqueous ions have been recovered from waste CdSe electrodes by soaking in minimal amount of HCl (10.0 M) at 80 °C for 60 min. The Se2− ions, converted into H2Se(g) by the acid, have been trapped in basic NaOH solution for further use. The recovered Cd2+ ions have been used to deposit new (recycled) CdSe film electrodes onto fluorine doped tin oxide films (FTO/Glass) using aqueous Na2SeSO3 solutions by two methods. Electrochemical deposition (ECD) has been performed using applied potential (−1.0 V vs Ag/AgCl). Chemical bath deposition (CBD) has been performed in a basic medium at 70 °C. Both ECD and CBD recycled films have been prepared using recovered Cd2+ solutions, whereas fresh films have been prepared using fresh solutions. In both cases, the recycled CdSe films do not show any inferior characteristics to the freshly prepared counterparts. Effects of annealing at 150 °C and cooling rate on physical and photoelectrochemical (PEC) characteristics have been studied for different CdSe film electrodes. In both recycled and fresh systems, the CBD film electrodes exhibit enhanced uniformity, compactness and photo-electrochemical (PEC) performance by annealing. Upon annealing, the recycled and fresh ECD films exhibit less film uniformity and compactness, and consequently lower PEC performance. In ECD and CBD films, fast cooling is advantageous over slow cooling. Conversion efficiency values of ~8% are observed for the CBD recycled pristine films once carefully annealed and quickly cooled. This is higher than literature values for pristine CdSe (~5%), TiO2/CdS/CdSe (~4%) film electrodes, and resembles that for Tl/CdSe0.65Te0.35 (~8) multi-layer systems. The results show the feasibility of recycling waste CdSe film electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Flexible quantum dot-sensitized solar cells with improved efficiencies based on woven titanium wires10.1039/C4TA03212H ↗
2. Colloidal quantum dot solar cells10.1016/j.solener.2011.02.005 ↗
3. Synthesis of 2D metal chalcogenide thin films through the process involving solution-phase deposition10.1002/adma.201707577 ↗
4. Band tunable CdSe quantum dot-doped metals for quantum dot-sensitized solar cell application10.1155/2019/9812719 ↗
5. Enhancement of electrochemically deposited pristine CdTe film electrode photoelectrochemical characteristics by annealing temperature and cooling rate10.1016/j.ijleo.2019.163220 ↗
6. Investigation of Cu-doping effects in CdTe solar cells by junction photoluminescence with various excitation wavelengths10.7567/JJAP.56.08MC02 ↗
7. Life Cycle Assessment of an innovative recycling process for crystalline silicon photovoltaic panels10.1016/j.solmat.2016.03.020 ↗
8. Review on feasible recycling pathways and technologies of solar photovoltaic modules10.1016/j.solmat.2015.05.005 ↗
9. Cadmium recovery and recycling from chemical bath deposition of CdS thin layers10.1002/pip.402 ↗
10. Recycling of photovoltaic panels by physical operations10.1016/j.solmat.2014.01.012 ↗
11. Recycled polycrystalline CdS film electrodes with enhanced photo-electrochemical characteristics10.1016/j.mssp.2017.10.045 ↗
12. EFFECT OF Cr DOPING INTO CdSe HOST NANOSIZE THIN FILMS ON THE STRUCTURAL, OPTICAL AND MAGNETIC PROPERTIES
13. Characterization of electrodeposited cadmium selenide thin films10.3329/dujs.v60i1.10352 ↗
14. Sensing properties of PQT-12/CdSe quantum dots composite-based organic thin film transistors10.1109/JSEN.2018.2845873 ↗
15. LED-based light source combined with quantum dot for spectral imaging10.1155/2019/6436508 ↗
16. Performance enhancement of CdS/CdSe quantum dot-sensitized solar cells with (001)-Oriented Anatase TiO 2 nanosheets photoanode10.1186/s11671-018-2842-5 ↗
17. Enhanced performance of CdSe/ZnS quantum dot light-emitting diodes with organic small molecule mCP-modified emitting layers10.1166/jno.2019.2594 ↗
18. Photoelectrochemical (PEC) studies on CdSe thin films electrodeposited from non-aqueous bath on different substrates10.1007/s12034-007-0053-2 ↗
19. Enhanced PEC characteristics for CdSe polycrystalline film electrodes prepared by combined electrochemical/chemical bath depositions10.1016/j.jelechem.2016.04.048 ↗
20. Effects of annealing temperature and cooling rate on photo-electrochemical performance of pristine polycrystalline metal-chalcogenide film electrodes10.1016/j.solener.2019.03.028 ↗
21. CdS/FTO thin film electrodes deposited by chemical bath deposition and by electrochemical deposition: a comparative assessment of photo-electrochemical characteristics10.1016/j.solidstatesciences.2013.01.004 ↗
22. M.m. Mari'e, Z.M. Hawash, M.I. Faroun, G. Campet, D. Park, H.S. Hilal, Combined electrochemical/chemical bath depositions to prepare CdS film electrodes with enhanced PEC characteristics10.1016/j.jelechem.2013.08.022 ↗
23. Improved efficiency of CdSe photoanodes by photoelectrochemical etching10.1063/1.91931 ↗
24. Enhancement of CdSe film electrode PEC characteristics by metalloporphyrin/polysiloxane matrices10.1016/j.electacta.2014.05.071 ↗
25. Influence of air annealing on the structural, optical and electrical properties of chemically deposited CdSe nano-crystallites10.1016/j.apsusc.2003.09.022 ↗
26. High PEC conversion efficiencies from CuSe film electrodes modified with metalloporphyrin/polyethylene matrices10.1016/j.electacta.2015.05.125 ↗
27. Enhanced PEC characteristics of pre-annealed CuS film electrodes by metalloporphyrin/polymer matrices10.1016/j.solmat.2015.09.034 ↗
28. Electrocrystallization of CdSe from aqueous electrolytes: structural arrangement from thin films to self-assembled nanowires10.1016/j.jcrysgro.2011.01.003 ↗
29. Optical and structural properties of chemical bath deposited CdSe nanoparticle thin films for photovoltaic applications
30. Chemical aerosol flow synthesis of semiconductor nanoparticles10.1021/ja054124t ↗
31. Chemical bath deposition and characterization of CdSe thin films for optoelectronic applications10.1007/s10853-010-4756-1 ↗
32. Structural, optical and electrical properties of nanostructured CdS: CuS composite thin films grown by CBD method
33. The effect of post annealing temperature on grain size of indium-tin-oxide for optical and electrical properties improvement10.1016/j.rinp.2019.102159 ↗
34. Synthesis and characterization of CdSe nanocrystalline thin films deposited by chemical bath deposition10.1016/j.mssp.2013.04.027 ↗
35. Characteristics and properties of CdSe quantum dots
36. Synthesis of CdS nanoparticles using glucose as a capping agent
37. Manickathai · 2008
38. Electrodeposition of CdSe layers of various thickness to improve the photocatalytic performance of the CdS/CdSe bilayer structure
39. Electronic transport of n-type CdSe quantum dot films: effect of film treatment10.1063/1.2192288 ↗
40. The effect of Ag doping on the structural, optical and electrical properties of CdSe thin films,10.33899/rjs.2018.145399 ↗
41. The effect of annealing temperature on the band gap of ZnO nano materials
42. Tuning of structural, optical band gap, and electrical properties of room-temperature-grown epitaxial thin films through the Fe 2 O 3: NiO ratio10.1038/s41598-019-41049-9 ↗
43. The influences of process annealing temperature on microstructure and mechanical properties of near β high strength titanium alloy sheet10.3390/ma12091478 ↗
44. Investigation of annealing effects on the physical properties of Ni0. 6Zn0. 4Fe1. 5Al0. 5O4 ferrite10.1039/C9RA02238D ↗
45. Influence of the particle size on the optical properties of CdSe nanoparticles10.2174/1874140100903010015 ↗
46. Effect of cooling rate of pre-annealed CdS thin film electrodes prepared by chemical bath deposition: enhancement of photoelectrochemical characteristics10.1016/j.electacta.2008.12.062 ↗
47. Film electrodes deposited from Cu2SnSe3 source in comparison with those deposited from SnSe and Cu2ZnSnSe4 sources by thermal vacuum evaporation: effect of argon gas flow rate10.1016/j.electacta.2014.06.167 ↗
48. Effect of under nitrogen annealing on photo-electrochemical characteristics of films deposited from authentic Cu2SnSe3 sources by thermal vacuum under argon gas condensation10.1016/j.ijhydene.2016.04.155 ↗
49. Copper selenide film electrodes prepared by combined electrochemical/chemical bath depositions with high photo-electrochemical conversion efficiency and stability10.1016/j.solidstatesciences.2017.11.013 ↗
50. Thickness dependent properties of electro-chemical-photovoltaic (ecpv) cells formed with chemically deposited CdS films10.1007/BF02744420 ↗
51. Black · 2016
52. Charge recombination control for high efficiency CdS/CdSe quantum dot co-sensitized solar cells with multi-ZnS layers10.1039/C7DT04356B ↗
53. Annealing effect on photovoltaic performance of CdSe quantum-dots-sensitized TiO 2 nanorod solar cells10.1155/2012/591278 ↗
54. Highly efficient quantum-dot-sensitized solar cell based on co-sensitization of CdS/CdSe10.1002/adfm.200800940 ↗
55. High efficiency of CdSe quantum-dot-sensitized Ti O 2 inverse opal solar cells10.1063/1.2757130 ↗
56. A thin-film polycrystalline photoelectrochemical cell with 8% solar conversion efficiency10.1038/285029a0 ↗
57. Abu Alrob · 2019