Mechanism analysis and process optimization of nanogrinding single-crystal SiC
Source abstract
Abstract
The aim of this study is to investigate the effects of various process parameters (the grinding-wheel speed, feed rate, workpiece speed, spark-out grinding time, and grinding-wheel granularity) on the surface quality of single-crystal SiC during nanogrinding while concurrently analysing the grinding mechanism and optimising the overall process. Experiments are performed to investigate the macrotexture and micromorphology of the single-crystal SiC surface. By employing image-processing technology, the proportion of brittle and plastic removal components is determined, thus facilitating a comprehensive analysis into the removal mechanism and the subsequent establishment of a material-removal model. The findings indicate that after grinding, the surface of single-crystal SiC exhibits a distinct grinding trajectory that radiates outwards from the centre, the density of the grinding trajectory is higher in the central area than at the periphery. The overall surface roughness increases from the centre to the edge. As the grinding-wheel speed increases, the feed rate decreases, the spark-out grinding time is prolonged, the grinding-wheel granularity increases, the abrasive cutting depth of the diamond grinding wheel decreases, the proportion of brittle removal on the surface of single-crystal SiC decreases, the proportion of plastic removal increases, the grinding groove becomes shallow, and the density of the groove increases significantly. Under the optimal process parameters, the surface roughness is reduced to 5.35 nm, and the smooth mirror effect is achieved via grinding.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Silicon carbide in contention10.1038/430974a ↗
2. Silicon carbide as a platform for power electronics10.1126/science.1168704 ↗
3. Effect of abrasive on tribological behavior and polishing effect of β-Ga2O3(100) substrate10.1016/j.mssp.2023.108059 ↗
4. First-principles investigation of effects of defects on the physical properties of 3C-SiC under high temperatures and pressures10.1016/j.jmrt.2022.08.017 ↗
5. Thermal conductivity of GaN, 71GaN, and SiC from 150 K to 850 K
6. Temperature-dependent infrared optical properties of 3C-, 4H- and 6H-SiC10.1016/j.physb.2018.02.023 ↗
7. Physico-chemical characterisation of silicon carbide refractories10.1016/j.jeurceramsoc.2005.08.009 ↗
8. Stability assessment of alumina and SiC based refractories in a high temperature steam environment as potential thermal energy storage materials10.1016/j.oceram.2023.100472 ↗
9. Silicon carbide based traction inverter cooling in electric vehicle using heat pipes
10. Silicon carbide: physics, manufacturing, and its role in large-scale vehicle electrification10.3390/chips2030013 ↗
11. Influences of processing parameters on metal-bonded diamond wheel wear when grinding a sapphire wafer10.1016/j.diamond.2021.108275 ↗
12. Experimental study of surface performance of monocrystalline 6H-SiC substrates in plane grinding with a metal-bonded diamond wheel10.1007/s00170-016-9095-1 ↗
13. State-of-the-art of ultra-precision grinding technology for hard and brittle materials
14. Research on robotic belt grinding method of blisk for obtaining high surface integrity features with variable inclination angle force control10.1016/j.rcim.2023.102680 ↗
15. Ductile-regime grinding: a new technology for machining brittle materials10.1115/1.2899676 ↗
16. Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics10.1016/j.ceramint.2016.11.066 ↗
17. Surface roughness modeling for grinding of Silicon Carbide ceramics considering co-existence of brittleness and ductility10.1016/j.ijmecsci.2017.07.061 ↗
18. Effect of grinding speed on mechining damage of silicon carbide ceramics
19. Understand anisotropy dependence of damage evolution and material removal during nanoscratch of MgF2 single crystals10.1088/2631-7990/ac9eed ↗
20. Basic research on the grinding technology of silicon carbide material
21. Phase transition and plastic deformation mechanisms induced by self-rotating grinding of GaN single crystals10.1016/j.ijmachtools.2021.103827 ↗
22. Three-dimensional topography modelling and grinding performance evaluating of micro-structured CVD diamond grinding wheel10.1016/j.ijmecsci.2022.108079 ↗
23. Stability prediction and optimization of multi-regenerative weak stiffness grinding system based on microstructured tool10.1016/j.ymssp.2023.111010 ↗
24. Study progress of single crystal functional materials by rotary infeed surface grinding
25. Analysis of kinematic geometry on wafer rotation grinding processes
26. Critique of materials‐based models of ductile machining in brittle solids10.1111/jace.17344 ↗
27. Measurement of the cut depth of grain in nano-grinding of silicon wafers
28. Influence of work material on grinding forces
29. Effect of grinding on strength of tetragonal zirconia and zirconia-toughened alumina10.1080/10940349708945637 ↗