journal article·2021-03

Effects of crystal planes on topography evolution of silicon surface during nanoscratch-induced selective etching

Lei Wu, Peng Chen, Liang Deng, Pei Zhang, Bingjun Yu, Linmao Qian

Publisher page

Abstract

Abstract Diamond machining-induced structural defects can usually degrade the optical and electrical performance of silicon (Si)-based devices. Investigating topography evolution of machined Si surfaces during wet etching is of significance for detecting and eliminating these defects and thereby improving device performance. In this paper, effects of Si crystal planes on surface topography evolution during nanoscratch-induced selective etching in the commonly used etchants, i.e., potassium hydroxide (KOH), tetra-methyl-ammonium hydroxide (TMAH), and a mixture of hydrofluoric acid (HF) and nitric acid (HNO3), were investigated using a single-asperity diamond tip. It is noted that nanoscratch-induced subsurface deformation of Si(100) and Si(110) can resist KOH and TMAH solutions etching, and thereby in situ form protrusive hillocks, which can be ascribed to the amorphous Si from the scratching. Higher etching rate of Si(110) planes appears to be responsible for the formation of higher protrusive hillocks. Nevertheless, nanoscratch-induced selective etching on Si(111) surface in TMAH solution is quite distinct from that in KOH solution. The difference in activated atomic steps on Si(111) surface may cause scratched regions to promote KOH etching but resist TMAH etching. It is also found that in case of HF/HNO3 mixtures etching, nanoscratch-induced subsurface deformation on Si surface can promote the etching and thereby form sunken grooves, regardless of crystal plane orientations. Further analysis indicates that Si wafers with lower hardness and elastic modulus are beneficial for forming more serious subsurface damages during the scratching, yielding deeper sunken grooves through subsequent selective etching. These findings provide a useful reference for defect detection on Si surface and developing the nanofabrication based on scanning probe microscope.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. In situ experimental study on material removal behaviour of single-crystal silicon in nanocutting10.1016/j.ijmecsci.2019.01.015 ↗
2. Removal mechanism and surface quality of crystal semiconductor materials in scratching tests with Berkovich indenter10.1016/j.mssp.2019.104746 ↗
3. The investigation of influence of tool wear on ductile to brittle transition in single point diamond turning of silicon10.1016/j.wear.2016.08.003 ↗
4. Near-field microscopy inspection of nano scratch defects on the monocrystalline silicon surface10.1016/j.precisioneng.2019.02.008 ↗
5. Effect of nanoscratch conditions on both deformation behavior and wet-etching characteristics of silicon (100) surface10.1016/j.wear.2005.11.007 ↗
6. Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining10.1016/j.precisioneng.2008.10.008 ↗
7. Process induced sub-surface damage in mechanically ground silicon wafers10.1088/0268-1242/23/7/075038 ↗
8. Effects of normal load and etching time on current evolution of scratched GaAs surface during selective etching10.1016/j.mssp.2019.104744 ↗
9. Nondestructive measurement of machining-induced amorphous layers in single-crystal silicon by laser micro-Raman spectroscopy10.1016/j.precisioneng.2007.08.006 ↗
10. Methods for detection of subsurface damage: a review10.1186/s10033-018-0229-2 ↗
11. Rapid identification of ultrathin amorphous damage on monocrystalline silicon surface10.1039/D0CP01370F ↗
12. Temperature-dependent nanofabrication on silicon by friction-Induced selective etching10.1186/s11671-016-1438-1 ↗
13. Rapid nanofabrication via UV-assisted selective etching on GaAs without templates10.1016/j.cplett.2019.01.007 ↗
14. Rapid and maskless nanopatterning of aluminosilicate glass surface via friction-induced selective etching in HF solution10.1039/C5RA13049B ↗
15. Scanning probe-based nanolithography: nondestructive structures fabricated on silicon surface via distinctive anisotropic etching in HF/HNO3 mixtures10.1007/s10853-020-05452-2 ↗
16. Friction-induced selective etching on silicon by TMAH solution10.1039/C8RA07064D ↗
17. Fast and maskless nanofabrication for high-quality nanochannels10.1016/j.snb.2019.03.001 ↗
18. Two-layer microstructures fabricated by one-step anisotropic wet etching of Si in KOH solution10.3390/mi7020019 ↗
19. Micropyramidal hillocks on KOH etched {100} silicon surfaces:Formation, prevention and removal10.1088/0960-1317/9/2/309 ↗
20. Fast etching of silicon with a smooth surface in high temperature ranges near the boiling point of KOH solution10.1016/j.sna.2003.11.036 ↗
21. Silicon anisotropic etching in TMAH solutions containing alcohol and surfactant additives10.1016/j.sna.2012.02.018 ↗
22. A revised model of silicon oxidation during the dissolution of silicon in HF/HNO3 mixtures10.1039/C9CP04429A ↗
23. Isotropic wet chemical etching of deep channels with optical surface quality in silicon with HNA based etching solutions10.1016/j.mssp.2013.05.017 ↗
24. Effect of crystal orientation on the formation of bct-5 silicon10.1007/s00339-015-9323-9 ↗
25. Bulk micromachining of silicon, P
26. Etch characteristics of KOH, TMAH and dual doped TMAH for bulk micromachining of silicon10.1016/j.mejo.2005.07.012 ↗
27. Fracture anisotropy in silicon single crystal10.1016/S0921-5093(99)00077-5 ↗
28. Deformation mechanisms of silicon during nanoscratching10.1002/pssa.200521259 ↗
29. Effect of crystal plane orientation on tribochemical removal of monocrystalline silicon10.1038/srep40750 ↗
30. Effect of crystal plane orientation on the friction-induced nanofabrication on monocrystalline silicon10.1186/1556-276X-8-137 ↗
31. Transmission electron microscopy observation of deformation microstructure under spherical indentation in silicon10.1063/1.1332110 ↗
32. Study on the mechanism of silicon etching in HNO3-rich HF/HNO3 mixtures10.1021/jp066348j ↗
33. An atomistic introduction to anisotropic etching10.1088/0960-1317/17/4/S01 ↗
34. Strongly reduced Si surface recombination by charge injection during etching in diluted HF/HNO310.1002/cphc.201200269 ↗
35. Anisotropic etching of crystalline silicon in alkaline solutions10.1149/1.2086277 ↗
36. Fabrication mechanism of friction-induced selective etching on Si (100) surface10.1186/1556-276X-7-152 ↗
37. Site-controlled fabrication of silicon nanotips by indentation-induced selective etching10.1016/j.apsusc.2017.07.047 ↗
38. Difference in activated atomic steps on (111) silicon surface during KOH and TMAH etching