Alternative insulation liners for through-silicon vias: A comprehensive review
Source abstract
Abstract
In contemporary times, 3D integration is acknowledged as the most promising direction for the development of the chip industry. The core technology behind 3D integration is through-silicon via (TSV) structures, which offer vertical electrical interconnection through the dies. The insulation liner is a critical component that guarantees the functioning of TSVs through its strong influence on electrical characteristics and thermal-mechanical reliability. Conventional insulation liners face constant challenges due to the increasingly complex integration and packaging, which involves smaller diameters and higher aspect ratios of TSVs. Consequently, novel insulation liner approaches are continuously explored and tested to meet the stringent requirements. This review provides a comprehensive cross-sectional comparison and summary of the insulation liners, including both conventional methods such as SACVD and PECVD, as well as alternative approaches like ALD, air-gap, vapor-deposited polymers, and wet-deposited polymers. The advantages and disadvantages of each method are discussed based on their specific performance properties, such as conformality, electrical characteristics, and thermal-mechanical reliability, which are critical for the proper functioning of through-silicon via (TSV) structures in 3D integration and chip industry development. This evaluation of the different insulation liners will aid researchers in better comprehending these methods and making informed decisions as per their specific needs and requirements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Semiconductor materials and devices · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Electrical modeling and characterization of through silicon via for three-dimensional ICs10.1109/TED.2009.2034508 ↗
2. Impact of oxide liner properties on TSV Cu pumping and TSV stress
3. TSV unit processes and integration
4. Development of 3D-packaging process technology for stacked memory chips
5. 3D-integration of silicon devices: a key technology for sophisticated products
6. SiO2
7. Subatmospheric chemical vapor deposition ozone/TEOS process for SiO2 trench filling10.1116/1.587830 ↗
8. Trench filling characteristics of low stress TEOS/ozone oxide deposited by PECVD and SACVD10.1007/s00542-003-0313-z ↗
9. Through Silicon via technology using tungsten metallization
10. Process integration considerations for 300 mm TSV manufacturing10.1109/TDMR.2009.2034317 ↗
11. Sub-atmospheric chemical vapor deposition of SiO2 for dielectric layers in high aspect ratio TSVs
12. Fabrication of dielectric insulation layers in TSV by different processes
13. Study on TSV isolation liners for a via Last approach with the use in 3D-WLP for MEMS10.1007/s00542-015-2797-8 ↗
14. Properties of isolation liner and electrical characteristics of high aspect ratio TSV in 3D stacking technology
15. Low temperature PECVD of dielectric films for TSV applications
16. Pattern density Dependency of the underlying Layer on O3-tetraethylorthosilicate (TEOS) film formation10.1149/2.021205jss ↗
17. Stanley Wolf · 2000 · 1
18. Banqiu · 2011 · 1
19. Investigation of different methods for isolation in through silicon via for 3D integration10.1016/j.mee.2012.11.027 ↗
20. Process development and optimization for 3 μm high aspect ratio via-middle through-silicon vias at wafer level10.1109/TSM.2015.2485079 ↗
21. Extreme wafer thinning and nano-TSV processing for 3D heterogeneous integration
22. Room temperature ALD oxide liner for TSV applications
23. High aspect ratio (>10:1) via-middle TSV with high-k dielectric liner oxide
24. Small pitch, high aspect ratio via-last TSV module
25. Highly-conformal plasma-enhanced atomic-layer deposition silicon dioxide liner for high aspect-ratio through-silicon via 3D interconnections
26. Advanced metallization scheme for 3×50μm via middle TSV and beyond
27. Continuity and reliability assessment of a scalable 3×50μm and 2×40μm via-middle TSV module
28. Atomic layer deposition for high aspect ratio through silicon vias10.1016/j.mee.2013.01.031 ↗
29. Alternative deposition solution for cost reduction of TSV integration
30. Permittivity (dielectric constant) of inorganic solids
31. Influence of bosch etch process on electrical isolation of TSV structures10.1109/TCPMT.2011.2160395 ↗
32. Cverna · 2002
33. Copper-filled through-silicon vias with parylene-HT liner10.1109/TCPMT.2016.2521682 ↗
34. Rigden · 1996 · 353
35. ToolBox · 2003
36. Charge-trap-free polymer-liner through-silicon vias for reliability improvement of 3D ICs
37. Material effect on thermal stress of annular-trench-isolated through silicon via (TSV)10.35848/1347-4065/ab85aa ↗
38. 7 - polyimides
39. Electrografted insulator layer as copper diffusion barrier for TSV interposers
40. A 300-mm wafer-level three-dimensional integration scheme using tungsten through-silicon via and hybrid Cu-adhesive bonding
41. Thermal and electrical tests of air-gap TSV
42. Implementation of air-gap through-silicon-vias (TSVs) using sacrificial technology10.1109/TCPMT.2013.2265211 ↗
43. Ultralow-capacitance through-silicon vias with annular air-gap insulation layers10.1109/TED.2013.2244895 ↗
44. Studies on electrical performance and thermal stress of a silicon interposer with TSVs
45. Low-capacitance through-silicon-vias with combined air/SiO2 liners10.1109/TED.2015.2504093 ↗
46. A novel silicon-air-silicon through-silicon-via structure realized using double-side partially overlapping etching10.1109/LED.2020.3018299 ↗
47. Design, fabrication and stress evaluation of Si electrical interconnection Air-gapped from Si interposer
48. Fabrication and characterization of SOI based interposer with air gapped Si-TSV for 2.5D integration
49. A coupled thermal and mechanical modeling to investigate the stress of TSVs considering insulation layer
50. Parylene N as a dielectric material for through silicon vias
51. Bottom-up filling of through Silicon via (TSV) with Parylene as sidewall protection layer
52. Fabrication and electrical characterization of Parylene-HT liner bottom-up copper filled through silicon via (TSV)
53. Twice-etched silicon approach for via-last through-silicon-via with a Parylene-HT liner
54. Thermo-mechanical and electrical characterization of through-silicon vias with a vapor deposited polyimide dielectric liner
55. Capacitance characteristics of low-k low-cost CVD grown polyimide liner for high-density Cu through-Si-via in three-dimensional LSI10.7567/JJAP.55.04EC12 ↗
56. On-wafer thermomechanical characterization of a thin film polyimide formed by vapor deposition polymerization for through-silicon via applications: comparison to plasma-enhanced chemical vapor depositionSiO210.1002/pol.20200094 ↗
57. Highly beneficial organic liner with extremely low Thermal stress for fine Cu-TSV in 3D-integration
58. Conformal isolation of high-aspect-ratio TSVs using a low-κ dielectric deposited by filament-assisted CVD10.1016/j.mee.2016.11.005 ↗
59. Yasuhara · 2010
60. Scalable through Silicon via with polymer deep trench isolation for 3D wafer level packaging
61. 3-D wafer-level packaging die stacking using spin-on-dielectric polymer liner through-silicon vias10.1109/TCPMT.2011.2125791 ↗
62. Low capacitance through-silicon-vias with uniform benzocyclobutene insulation layers10.1109/TCPMT.2013.2241179 ↗
63. High-frequency characterization of through-silicon-vias with benzocyclobutene liners10.1109/TCPMT.2017.2751480 ↗
64. Fabrication and electrical characteristics of a novel interposer with polymer liner and silicon pillars with ultra-low-resistivity as through-silicon-vias (TSVs) for 2.5D/3D applications10.1007/s00542-014-2324-3 ↗
65. Crack-free fabrication and electrical characterization of coaxial ultra-low-resistivity-silicon through-silicon-vias10.1109/TSM.2019.2946883 ↗
66. High aspect ratio and low capacitance through-silicon-vias (TSVs) with polymer insulation layers10.1016/j.mee.2012.11.002 ↗
67. Development of eccentric spin coating of polymer liner for low-temperature TSV technology with ultra-fine diameter10.1109/LED.2018.2884452 ↗
68. TSV liner dielectric technology with spin-on low-k polymer
69. Innovative polyimide liner deposition method for high-aspect-ratio and high-density through-silicon-vias (TSVs)10.1016/j.mee.2015.09.009 ↗
70. Minimized hysteresis and low parasitic capacitance TSV with PBO (polybenzoxazole) liner to achieve ultra-high-speed data transmission
71. Fabricating photosensitive polymer insulation layer by spin-coating for through silicon vias
72. Wet-process deposition of TSV liner and metal films
73. Integration of electrografted layers for the metallization of deep TSVs10.4071/imaps.259 ↗
74. Wet metallization of high aspect ratio TSV using electrografted polymer insulator to suppress residual stress in silicon10.1109/TDMR.2017.2716943 ↗
75. Electrografted P4VP for high aspect ratio copper TSV insulation in via-last process flow10.1149/2.0321606jss ↗
76. Electroless grafting of polymer insulation layers in through-silicon vias10.1149/2.0141910jss ↗