The study of crack damage and fracture strength for single crystal silicon wafers sawn by fixed diamond wire
Source abstract
Abstract
Abstract Reducing the thickness of monocrystalline silicon wafers is an important measure to reduce the processing cost. The crack damage reduces the mechanical properties of silicon wafers and that has been a key restraining factor of wafer thinning. This paper uses the cross-section scanning microscopy method and three-point bending method to study the crack damage and fracture strength of wafers respectively. The median crack does not extend vertically downwards, but has a certain inclination angle. In addition, part of lateral cracks did not fully extend to the sliced surface and some of them are interlaced each other. The median crack and the lateral crack together form the subsurface crack damage. Most of the subsurface cracks have a depth between 5 μm and 13 μm, and the number of subsurface cracks with a depth between 7 μm and 9 μm is the largest. The number of cracks first increases and then decreases with the increase of subsurface crack depth. The fitted subsurface crack depth distribution function can better reflect the crack depth distribution characteristic. The direction of the surface cracks on the surface of the wafer is relatively complicated. The cracks have a certain angle with the groove, but the cracks show a certain regular distribution on both sides of the groove along the wire direction. The adjacent surface cracks cross each other to form more complex surface cracks. The fracture strengths of wafers are distributed between 70 MPa and 200 MPa. The larger the crack length, the overall Weibull distribution of fracture strength is biased to the left.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Burghartz · 2010
2. 2019
3. Wire sawing technology: a state-of-the-art review10.1016/j.precisioneng.2015.08.008 ↗
4. Discrete element simulation of micromechanical removal processes during wire sawing10.1016/j.wear.2013.04.026 ↗
5. A new method of determining the slicing parameters for fixed diamond wire saw10.1016/j.mssp.2020.105252 ↗
6. Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon10.1016/j.precisioneng.2017.04.011 ↗
7. Fabrication of thin resin-bonded diamond wire and its application to ductile-mode wire sawing of mono-crystalline silicon10.1016/j.mssp.2021.105665 ↗
8. Analysis of crack-free surface generation of photovoltaic polysilicon wafer cut by diamond wire saw10.1016/j.solener.2021.01.009 ↗
9. Study on cutting PV polysilicon with a new type of diamond abrasives-helix-distribution saw wire based on controlling the subsurface microcrack damage depth10.1007/s00170-020-06019-w ↗
10. A fracture mechanics approach to enhance product and process sustainability in diamond wire sawing of silicon wafers for solar cells through improved wire design
11. Subsurface crack damage in silicon wafers induced by resin bonded diamond wire sawing10.1016/j.mssp.2016.10.021 ↗
12. Experimental and numerical analysis of scratching induced damage during diamond wire sawing of silicon10.1016/j.wear.2020.203328 ↗
13. Effects of wafer thinning condition on the roughness, morphology and fracture strength of silicon die10.1115/1.1647123 ↗
14. Investigations of the influence of dicing techniques on the strength properties of thin silicon10.1016/j.microrel.2006.09.002 ↗
15. Laser technology for wafer dicing and microvia drilling for next generation wafers
16. The fracture strength of nitrogen doped silicon wafers10.1016/0921-5107(95)01258-3 ↗
17. Mechanical strength problem of thin silicon wafers (120 and 140 μm) cut with thinner diamond wires (Si kerf 120→ 100 μm) for photovoltaic use10.1016/j.mssp.2020.105209 ↗
18. Fracture strength of silicon wafers sawn by fixed diamond wire saw10.1016/j.solener.2017.08.063 ↗
19. Comparative analysis of mechanical strength of diamond-sawn silicon wafers depending on saw mark orientation, crystalline nature and thickness10.1016/j.solmat.2019.110068 ↗
20. The impact of damage etching on fracture strength of diamond wire sawn monocrystalline silicon wafers for photovoltaics use10.7567/JJAP.57.126501 ↗
21. Wu · 2012
22. Analysis of surface cracks in multi-crystalline thin silicon wafers10.1016/j.engfracmech.2014.04.012 ↗
23. Fracture analysis and distribution of surface cracks in multicrystalline silicon wafers10.1115/1.4025972 ↗
24. Towards the correlation of mechanical properties and sawing parameters of silicon wafers
25. Comparative analysis of fracture strength of slurry and diamond wire sawn multicrystalline silicon solar wafers10.1002/adem.201200262 ↗
26. Effect of crystal defects on mechanical properties relevant to cutting of multicrystalline solar silicon10.1016/j.mssp.2013.05.016 ↗
27. Mechanical behavior of diamond-sawn multi-crystalline silicon wafers and its improvement10.1007/s12633-013-9170-2 ↗
28. Mechanical strength of silicon wafers cut by loose abrasive slurry and fixed abrasive diamond wire sawing10.1002/adem.201100263 ↗
29. Phase transformations in (111) Si after spherical indentation10.1557/jmr.2009.0249 ↗