journal article·2018-12

Purification of metallurgical-grade silicon using Si–Sn alloy in presence of Hf, Zr, or Ti

Yun Lei, Wenhui Ma, Jijun Wu, Kuixian Wei, Guoqiang Lv, Shaoyuan Li, Kazuki Morita

Publisher page

Abstract

Abstract Hf, Zr, or Ti was employed as additive to enhance removal of the main impurities from metallurgical-grade Si (MG–Si) during the Si–Sn alloy refining process. The microstructure of Si-Sn alloy without/with Zr, Hf, or Ti was observed and analyzed by electron probe microanalysis (EPMA) to investigate the distribution of impurities. Compositions of intermetallic phases precipitated in Sn or among the grain boundaries of Si were quantitatively analyzed using EPMA. The mechanisms of their formation and the removal of impurities are discussed. The results of Si refining showed that the addition of Hf or Zr slightly enhanced the removal of Al. The high refining temperature in the Si-Sn alloy refining process was responsible for the low extraction of B. Most of Zr, Hf, or Ti was removed simultaneously with other impurities during the Si–Sn alloy refining process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Si growth by directional solidification of Si–Sn alloys to produce solar-grade Si10.1016/j.jcrysgro.2013.05.024 ↗
2. Preparing crystalline silicon from Si–Sn solvent by zone melting directional solidification method10.1016/j.mssp.2017.06.044 ↗
3. Purification of metallurgical-grade silicon by Sn–Si refining system with calcium addition10.1016/j.seppur.2013.08.013 ↗
4. Refining of Si by the solidification of Si–Al melt with electromagnetic force10.2355/isijinternational.45.967 ↗
5. Growth of bulk Si from Si–Al alloy by temperature gradient zone melting10.1016/j.mssp.2017.04.017 ↗
6. Effect of Ti addition on B removal during silicon refining in Al–30%Si alloy directional solidification10.1016/j.seppur.2016.11.002 ↗
7. Thermodynamic evaluation of segregation behaviors of metallic impurities in metallurgical grade silicon during Al–Si solvent refining process10.1016/j.jcrysgro.2014.02.004 ↗
8. Effect of Si content on separation and purification of the primary Si phase from hypereutectic Al–Si alloy using rotating magnetic field10.1016/j.seppur.2015.01.005 ↗
9. Removal of impurities from metallurgical grade silicon during Ga–Si solvent refining10.1007/s12633-014-9269-0 ↗
10. Purification of metallurgical silicon using iron as impurity getter, Part Ⅱ: extent of silicon purification10.1007/s12540-011-6020-x ↗
11. Thermodynamics of boron distribution in solvent refining of silicon using ferrosilicon alloys10.1016/j.jallcom.2014.09.062 ↗
12. Low-temperature purification of silicon by dissolution and solution growth in sodium solvent10.1007/s12633-011-9105-8 ↗
13. Boron removal by dissolution and recrystallization of silicon in a sodium–silicon solution10.1016/j.seppur.2013.08.022 ↗
14. Refining silicon for solar cell application by copper alloying10.1007/s12633-009-9025-z ↗
15. Enhancement in extraction of boron and phosphorus from metallurgical grade silicon by copper alloying and aqua regia leaching10.1016/j.hydromet.2016.01.013 ↗
16. Effect of Sn addition on the separation and purification of primary Si from solidification of Al–30Si melt under electromagnetic stirring10.1016/j.jallcom.2017.07.257 ↗
17. Si purity control and separation from Si–Al alloy melt with Zn addition10.1016/j.jallcom.2014.05.138 ↗
18. Removal of B from Si by Hf addition during Al–Si solvent refining process10.1080/14686996.2016.1140303 ↗
19. Impurity effects in silicon for high efficiency solar cells10.1016/0022-0248(86)90226-5 ↗
20. Impurity phases and their removal in Si purification with Al–Si alloy using transition metals as additives10.1016/j.jallcom.2017.10.292 ↗
21. The Si–Sn (silicon–tin) system10.1007/BF02868552 ↗
22. C. Guéneau, C. Servant, F. Manier, Relationships between the grinding behavior and the microstructure of ferro-silicon alloys with 65 wt% silicon, INFACON 7, Trondheim, Norway, 1995, pp. 673–682.
23. The Si–Zr (silicon–zirconium) system10.1007/BF02898272 ↗
24. Experimental investigation of phase equilibria in the Fe–Si–Zr ternary system10.1007/s11669-013-0242-1 ↗
25. The Hf–Si (hafnium–silicon) system10.1007/BF02877595 ↗
26. The Fe–V (iron–vanadium) system10.1007/BF02868958 ↗
27. The Ti–Si–C system (titanium–silicon–carbon)10.1007/s11669-004-0132-7 ↗
28. Microstructure of metallurgical grade silicon during alloying refining with calcium10.1016/j.intermet.2012.02.009 ↗
29. Leaching behavior of impurities in Ca-alloyed metallurgical grade silicon10.1016/j.hydromet.2015.06.012 ↗
30. Solid solubilities of impurity elements in germanium and silicon10.1002/j.1538-7305.1960.tb03928.x ↗
31. Enhancing B removal from Si with small amounts of Ti in electromagnetic solidification refining with Al–Si alloy10.1016/j.jallcom.2016.01.127 ↗
32. Boron removal by titanium addition in solidification refining of silicon with Si–Al melt10.1007/s11663-005-0085-1 ↗