journal article·2024-07

Dislocation slip mechanism and prediction method during the ultra-precision grinding process of monocrystalline silicon

Ming Li, Xiaoguang Guo, Ning Huang, Yanyu Yang, Renke Kang, Dongming Guo, Ping Zhou

Publisher page

Abstract

Prediction of dislocation depth during ultra-precision grinding of monocrystalline silicon is a major challenge. To provide atomistic perspective, a single grain scratching molecular dynamics (MD) model of monocrystalline silicon is established to analyze the initiation and slip mechanism of dislocation. The simulation results show that the initiation of dislocations depends on the normal scratching force, and the dislocation length decreases with the decrease of scratching force and the increase of scratching velocity. Besides, the active slip system was identified by calculating Schmid factor, and the slip stress τ ( 111 ) [110],p (i.e. Peierls stress) of 2 GPa for ±1/2[110] dislocation on (1 1 ‾ 1) plane was obtained. Furthermore, a prediction model for dislocation depth was established based on the analysis of shear stress τ ( 111 ) [110]. Finally, a set of nano-scratch experiments were carried out, and the depth and slip direction of dislocation that close to the predicted were obtained by TEM method. This study provides a new method for predicting and controlling dislocation damage of monocrystalline silicon during ultra-precision grinding.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Properties of silicon
2. Single-crystal silicon-based electrodes for unbiased solar water splitting: current status and prospects10.1039/C8CS00638E ↗
3. Influence of normal load on the three-body abrasion behaviour of monocrystalline silicon with ellipsoidal particle10.1039/C7RA02148H ↗
4. Analytical prediction for depth of subsurface damage in silicon wafer due to self-rotating grinding process10.1016/j.cap.2019.02.015 ↗
5. In situ wireless measurement of grinding force in silicon wafer self-rotating grinding process10.1016/j.ymssp.2020.107550 ↗
6. Effects of deep subsurface damages on surface nanostructure formation in laser recovery of grinded single-crystal silicon wafers10.1016/j.precisioneng.2019.12.005 ↗
7. Study on structure transformation of Si wafer in grinding process10.4028/www.scientific.net/KEM.329.373 ↗
8. Formation of subsurface cracks in silicon wafers by grinding10.1016/j.npe.2018.09.003 ↗
9. Impact of back-grinding-induced damage on Si wafer thinning for three-dimensional integration10.7567/JJAP.53.05GE04 ↗
10. The removal mechanism of monocrystalline Si in the process of double diamond abrasive polishing by molecular dynamics simulation10.1007/s11249-021-01445-7 ↗
11. Phase transformation of monocrystalline silicon by nanoindentation–effect of processing temperature10.1016/j.mssp.2019.104601 ↗
12. Cutting characteristics of monocrystalline silicon in elliptical vibration nano-cutting using molecular dynamics method10.1016/j.commatsci.2022.111589 ↗
13. Investigations on thermal effects on scratch behavior of monocrystalline silicon via molecular dynamics simulation
14. A numerical study on subsurface quality and material removal during ultrasonic vibration assisted cutting of monocrystalline silicon by molecular dynamics simulation10.1088/2053-1591/ab0ccb ↗
15. Generation and distribution of residual stress during nano-grinding of monocrystalline silicon10.7567/JJAP.57.121302 ↗
16. Numerical and experimental investigation on ductile deformation and subsurface defects of monocrystalline silicon during nano-scratching10.1016/j.apsusc.2020.147034 ↗
17. Molecular dynamics study of crystal orientation effect on surface generation mechanism of single-crystal silicon during the nano-grinding process10.1016/j.jmapro.2021.12.014 ↗
18. Nano-grinding process of single-crystal silicon using molecular dynamics simulation: nano-grinding parameters effect10.1016/j.mssp.2022.106531 ↗
19. A study on phase transformation of monocrystalline silicon due to ultra-precision polishing by molecular dynamics simulation10.1063/1.4763462 ↗
20. Investigation of machining mechanism of monocrystalline silicon in nanometric grinding10.1063/1.4983216 ↗
21. Origin and evolution of a crack in silicon induced by a single grain grinding10.1016/j.jmapro.2022.01.037 ↗
22. Effects of grinding speeds on the subsurface damage of single crystal silicon based on molecular dynamics simulations10.1016/j.apsusc.2021.149668 ↗
23. Effect of indentation speed on deformation behaviors of surface modified silicon: a molecular dynamics study10.1016/j.commatsci.2018.08.019 ↗
24. Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining10.1016/j.precisioneng.2008.10.008 ↗
25. Material removal mechanisms of single-crystal silicon on nanoscale and at ultralow loads10.1016/S0043-1648(98)00302-0 ↗
26. Deformation of monocrystalline silicon under nanoscratching10.4028/www.scientific.net/AMR.41-42.15 ↗
27. Nanoscratch-induced deformation of single crystal silicon10.1116/1.3049517 ↗
28. Prediction of the threshold load of dislocation emission in silicon during nanoscratching10.1016/j.actamat.2013.05.035 ↗
29. Effect of temperature and stress on plastic deformation in monocrystalline silicon induced by scratching10.1063/1.1847692 ↗
30. Microscopic stress analysis of nanoscratch induced sub-surface defects in a single-crystal silicon wafer10.1016/j.precisioneng.2023.04.006 ↗
31. Elastic–plastic deformation of single-crystal silicon in nano-cutting by a single-tip tool10.7567/1347-4065/ab2b71 ↗
32. Atomistic understanding of the subsurface damage mechanism of silicon (100) during the secondary nano-scratching processing10.1016/j.mssp.2022.106624 ↗
33. Analytical potential for atomistic simulations of silicon, carbon, and silicon carbide10.1103/PhysRevB.71.035211 ↗
34. Shear-induced amorphization in nanocrystalline NiTi micropillars under large plastic deformation10.1016/j.actamat.2022.118358 ↗
35. Fundamental insights of mechanical polishing on polycrystalline Cu through molecular dynamics simulations
36. Analysis of high-speed-deformation-induced defect structures using heterogeneity parameter of dislocation distribution10.1016/S0921-5093(02)00695-0 ↗
37. Effect of cooling rate on the activation of slip systems in seed cast-grown monocrystalline silicon in the [001] and [111] directions10.1021/cg400428z ↗
38. Measurement of residual stress field anisotropy at indentations in silicon10.1016/j.scriptamat.2010.05.017 ↗
39. Hull · 2011 · vol. 37 · 1
40. Phonon transport properties depending on crystal orientation analyzed by nanoindentation using single-crystal silicon wafers
41. Effect of crystal plane orientation on tribochemical removal of monocrystalline silicon
42. Atomistic origins of material removal rate anisotropy in mechanical polishing of diamond crystal10.1016/j.carbon.2015.12.001 ↗
43. The effect of the anisotropy of single crystal silicon on the frequency split of vibrating ring gyroscopes10.3390/mi10020126 ↗
44. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
45. Study on the transformation and control mechanism of amorphous damage during the grinding process of monocrystalline silicon considering grain shapes by MD method
46. A new analytical model for estimation of scratch‐induced damage in brittle solids10.1111/j.1551-2916.2006.01471.x ↗
47. Effect of grinding damage on cutting force and ductile machining during single grain scratching of monocrystalline silicon10.1016/j.mssp.2022.107019 ↗