Research on the shape of ground wafer in Back Grinding of Wafer with Outer Rim
Source abstract
Abstract
Abstract Back Grinding of Wafer with Outer Rim (BGWOR) is a new method for carrier-less thinning of silicon wafers. There are few studies on the shape of wafer in BGWOR. In this paper, the mathematical models of three-dimensional grinding marks, surface shape and radial thickness of wafer in BGWOR were developed. With this model, the pattern of grinding marks and the radial thickness of the wafer under different inclination angles of grinding wheel were simulated by Matlab, then the relationship between the angle of grinding wheel shaft and the grinding marks, surface shape, radial thickness, total thickness variation (TTV) of wafer in BGWOR was also discussed. The inclination angles of grinding wheel have great influence on the surface shape and radial thickness distribution of wafer. Finally, the pilot experiments were conducted to verify the theoretical model of radial thickness of wafer in BGWOR. The study results will provide helpful instruction for improving the flatness of ground wafer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Process · 2021 · 10 · 1810.3390/pr10010018 ↗
2. A study of the total thickness variation in the grinding of ultra-precision substrates10.1016/S0924-0136(01)01039-1 ↗
3. Three-dimensional kinematical analyses for surface grinding of large scale substrate
4. Fine grinding of silicon wafers: a mathematical model for the wafer shape10.1016/j.ijmachtools.2004.02.012 ↗
5. Fine grinding of silicon wafers: machine configurations for spindle angle adjustments10.1016/j.ijmachtools.2004.06.013 ↗
6. Modeling on the ground wafer shape in wafer rotational grinding. International conference on advanced mechanical engineering
7. Simulation on the ground wafer shape in wafer rotational grinding10.1142/S0219686711002120 ↗
8. Modeling and investigation on wafer shape in wafer rotational grinding method10.1007/s00170-012-4040-4 ↗
9. Research on topography control of two-spindle and three-workstation wafer grinde10.1177/0954406211406809 ↗
10. Surface shape control of the workpiece in a double-spindle triple-workstation wafer grinder10.1088/1674-4926/32/10/104010 ↗
11. Process study on large-size silicon wafer grinding by using a small-diameter wheel
12. Grinding marks in Back grinding of wafer with outer rim10.1177/0954406220912787 ↗
13. Analysis of kinematic geometry on wafer rotation grinding processes
14. A grinding-based manufacturing method for silicon wafers: generation mechanisms of central bumps on ground wafers10.1080/10910340600710089 ↗
15. Investigation on the dressing shape of vacuum chuck in wafer rotation grinding10.4028/www.scientific.net/KEM.291-292.171 ↗